In Stock

In Stock

2397 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2397 products
    H16/18 Jib Halyard Block Assembly Murrays Part# 50-20240001 Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2". Hobie part# 20240001
    Hobie 16 forestay and jib halyard parts chart
    H-16/18 JIB HALYARD BLOCK ASSEMBLY
    Hobie
    Sale
    H-16/18 Jib Halyard Block Assembly Used
    Hobie
    Save $24.99
    Sale
    Comp-Tip Cover: H-16/18/20 Murrays Part# 31-2441 Hobie Cat recommends that CompTips on Hobie 16, 17, 18 and 20 be covered to protect them from ultraviolet light. Top quality polyester material is treated for UV-resistance and provides much better and long-lasting protection than nylon covers. Highly visible, red-tip reinforced end. Cover ties to mast with included line.
    H-16/18/20 COMP-TIP COVER
    Murrays Sports
    Save $26
    H16/18/Getaway Mast Tang Murrays Part# 50-20690000 Hobie® factory replacement mast tang for Hobie® 16, 18, Getaway and the 1995 and newer Hobie® 17. Use twelve 6-4 rivets (#19-5031) and twelve casings (#19-5020) for installation. Also known as a mast hound
    H-16/18/GETAWAY MAST TANG
    Hobie
    H16 and Sol Cat Jib Hank Murrays Part# 50-22090001 Hobie® factory jib hank attaches the jib to the forestay of a Hobie® 16 or Sol Cat
    H-16/SOL CAT JIB HANK
    Hobie
    H17 3-Piece Mesh Trampoline-Black Murrays Part# 30-3104 This aftermarket tramp for the 17 is now class-legal for Hobie racing! Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. It features a halyard pocket in the front and hiking straps on both sides. Compare to Hobie part# 50670091
    H-17 3PC MESH TRAMPOLINE-BLACK
    Murrays Sports
    H17 Assembly Manual Murrays Part# 50-50450001 Printout of Hobie 17 assembly manual PDF.
    H-17 ASSEMBLY MANUAL
    Murrays Sports
    H17 Boom End Cap Murrays Part# 50-50513011 Hobie® factory replacement aft end cap for Hobie 17.
    H-17 BOOM END CAP
    Hobie
    H17 Bridle 1/8" The H17 Bridle 1/8" is one bridle for Hobie® 17 constructed of 1/8" wire to factory specifications. Choose from White or Black wire coating. Compare to Hobie Cat Part Number 50701101.
    H-17 BRIDLE 1/8" WIRE
    Murrays Sports
    H-17 BRIDLE CROSSBAR ASSEMBLY
    Murrays Sports
    H17 Forestay 1/8" The H17 Forestay 1/8" for Hobie® 17 is constructed to factory specifications. Choose from White or Black wire coating. Compare to Hobie Cat® #50701201.
    H-17 FORESTAY 1/8" WIRE
    Murrays Sports
    H17 Illustrated Parts List Murrays Part# 50-87173000 Hobie® factory publication aids in identifying parts for the Hobie 17 and 17 Sport. Find the item number for the part you need and easily search the Murrays store. The parts list is also available for free download at the Hobie Cat® Web site.
    H-17 ILLUSTRATED PARTS LIST
    Murrays Sports
    H17 Mast Base Washer Murrays Part# 50-52411001 Replacement washer for Hobie 17 mast base assembly. Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    H17 Mast Halyard Hook Murrays Part# 50-50403011 Hobie® factory mast halyard hook for Hobie® 17. Hobie Part# 50403011
    H-17 MAST HALYARD HOOK
    Hobie
    H17 Rear Crossbar Backup Plate Murrays Part# 50-50253001 Backup plate for Hobie 17 rear crossbar assembly. Hobie Part# 50253001
    H-17 REAR CROSSBAR BACKUP PLATE
    Hobie
    H17 Shroud 1/8″ The H17 Shroud 1/8″ is a single shroud for Hobie® 17 constructed with 1/8″ wire to factory specifications. Each. Choose from White or Black wire coating. Purchase two to ensure equal lengths. Thimble/marine eye upgrade Hydraulic swaging produces a cleaner, stronger shroud. A marine eye is installed at the bottom end fitting where breakage commonly occurs. Electrolysis is reduced because both wire and marine eye are stainless steel. Wire manufacturers recommend stainless steel marine
    H-17 SHROUD 1/8" BLACK WIRE
    Murrays Sports
    H-17 Shroud 1/8″ The H17 Shroud 1/8″ is a single shroud for Hobie® 17 constructed with 1/8″ wire to factory specifications. Each. Choose from White or Black wire coating. Purchase two to ensure equal lengths. Use this page to order product numbers: 002-0304-01 White with thimble/thimble fittings (compare to Hobie Part Number 20790011) 002-0304-02 Black with thimble/thimble fittings (compare to Hobie Part Number 20792011)
    H-17 SHROUD 1/8" WIRE
    Murrays Sports
    H17 Shroud 5/32 Roller Swedge Murrays Part# 002-0305-12 This is our strongest Shroud for the Hobie 17.  If you have a Hobie 17 Sport or Hobie 17 Super kit or other setup that has a jib on the front, you need these. Heavy duty 5/32" single black shroud (sidestay) for Hobie 17 or Hobie 17 Sport is hydraulically swaged with a thimble and marine eye for a cleaner, stronger shroud.
    H-17 SHROUD 5/32" WIRE ROLLER SWAGED
    Murrays Sports
    H17 Slide Slug Murrays Part# 50-50504101  Slide  Slug attaches to the sail and fits the boom track Big slug for smooth action Stainless steel bail makes sail attachment simple Molded in weld gives maximum strength
    H-17 SLIDE SLUG
    Hobie
    H17 Sport Assembly Manual Murrays Part# 50-52450011 Hobie® factory assembly manual for the Hobie 17 Sport. The manual is also available for free download at the Hobie Cat® Web site.
    H-17 SPORT ASSEMBLY MANUAL
    Murrays Sports
    H-17 SPORT BRIDLE 5/32 BK​ Murrays PN 002-0315-22​ One bridle for the Hobie® 17 Sport (with jib) is constructed of black-coated, 5/32" 1x19 to factory specifications. Compare to Hobie 52500201.
    H-17 SPORT BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    H17 Sport Downhaul Hook Murrays Part# 50-52410011 Discontinued By Hobie - We recommend the Ronstan 8mm S-Hook 21-0049 to replace.  Hobie® factory replacement downhaul hook for Hobie 17 Sport is a special order item.. To replace downhaul line, order 8 feet of 1/4" prestretched line (#39-2312BK). Hobie Part# 52410011
    H-17 SPORT DOWNHAUL HOOK
    Hobie
    H17 Sport Forestay 5/32" Murrays Part# 002-0345-32 Black forestay for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52812001
    H-17 SPORT FORESTAY 5/32-BLACK WIRE
    Murrays Sports
    H17 Sport Jib Halyard with Shackle Murrays Part# 002-0386-00 Jib halyard with shackle for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52661001
    H-17 SPORT JIB HALYARD WITH SHACKLE
    Murrays Sports
    Trap Shock Cord H17 Murrays Part# 001-3520 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Shock cord comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Cord is 1/4" diameter by 12' Sold Each
    H-17 TRAP SHOCK CORD
    Murrays Sports
    H17 Trapeze Wires (2) The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge. Compare to Hobie part number 1471B. ​Order shock cord, Can't miss rings/dog bones and adjustment kits separately. Murrays PN 002-0353-01 002-0353-02
    H-17 TRAPEZE WIRES (2)
    Murrays Sports
    The Murrays Hobie 17 Wing Trampoline is a pair of aftermarket trampolines for Hobie 17 wings, they are not class-legal for Hobie class racing. Made with polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Includes both right and left wing trampolines. Sold as a pair (left and right)
    H-17 WING TRAMPOLINE-BLACK
    Murrays Sports
    H17/18 Mast Seal Plate Murrays Part# 50-61080000 Replacement mast seal plate for the Hobie 17 or Hobie 18.  Hobie Part# 61080000
    H-17/18 MAST SEAL PLATE
    Hobie
    Rudder Pins H17/18 Stainless Steel Murrays Part# 001-4273 Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings. Cotter pins are included. Alternative to Hobie Cat® #60880011.  (* Pre EZ LOC Rudder c
    H-17/18 RUDDER PINS PR (SS)
    Murrays Sports
    Rudder Locking Kit Hobie 17, 18, 20, 21 Murrays Part# 001-3552 The Rudder Locking Kit Hobie 17, 18, 20, 21 includes the rudder spring, rudder casting screw, and the rudder plunger for the Hobie 17, 18, 20 and 21. Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    H-17/18/20 and 21 RUDDER LOCKING KIT
    Murrays Sports
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    Rudder Cam Screws H17, H18, H20, Older Wave and Getaway Murrays Part# 001-3551 The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable. Compare to Hobie Cat® #5203 and #50312301. Sold in pairs
    H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS
    Murrays Sports
    Rudder Return Kit: H17/18/21 Murrays Part# 012-2059 Help prevent your rudders from constantly kicking up with the Rutter return kit. Originally from TrenTec, now made by Murrays Sports.
    H-17/18/21 RUDDER RETURN KIT
    Tren-Tec
    Hobie 18 rudder plunger. Hobie Part number 50312201. Also use on the 17 as well as the older Wave and Getaway
    H-17/18/GETAWAY RUDDER CAST PLUNGER
    Hobie
    Hawaiian Catamaran Righting System H17/18/Prindle Murrays Part# 001-4293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    H-17/18/PRINDLE HAWAIIAN CATAMERAN RIGHTING SYSTEM
    Murrays Sports
    Rudder Pins H17, H18, Wave, Getaway (Aluminum) Murrays Part# 001-4274 Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included.  Sold in pairs Compare to Hobie Cat® #60880001
    H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS
    Murrays Sports
    H-17/20 POSITIVE MAST ROTATION
    Murrays Sports
    clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra. Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.  Compare to Hobie Cat #30317.
    H-17/20/NACRA PINS AND RINGS KIT
    Murrays Sports
    Mast Ball H17 Wave Murrays Part# 50-50212301 Hobie factory replacement mast ball for Hobie® 17 and Wave. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. This ball can also be glued for use on Trac 16.
    H-17/WAVE MAST BALL
    Hobie
    Recently viewed