In Stock

In Stock

2261 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2261 products
    Trap Shock Cord H17 Murrays Part# 001-3520 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Shock cord comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Cord is 1/4" diameter by 12' Sold Each
    H-17 TRAP SHOCK CORD
    Murrays Sports
    H17 Trapeze Wires (2) The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge. Compare to Hobie part number 1471B. ​Order shock cord, Can't miss rings/dog bones and adjustment kits separately. Murrays PN 002-0353-01 002-0353-02
    H-17 TRAPEZE WIRES (2)
    Murrays Sports
    H17 Wing Trampoline Murrays part# 30-3104-3 The Murrays Hobie 17 Wing Trampoline is a pair of aftermarket trampolines for Hobie 17 wings, they are not class-legal for Hobie class racing. Made with polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won’t be sitting in a puddle. Includes both right and left wing trampolines. These tramps can be laced on vs the stock style of sleeved on
    H-17 WING TRAMPOLINE LACE ON
    Murrays Sports
    The Murrays Hobie 17 Wing Trampoline is a pair of aftermarket trampolines for Hobie 17 wings, they are not class-legal for Hobie class racing. Made with polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Includes both right and left wing trampolines. Sold as a pair (left and right)
    H-17 WING TRAMPOLINE-SLIDE ON
    Murrays Sports
    H17/18 Mast Seal Plate Murrays Part# 50-61080000 Replacement mast seal plate for the Hobie 17 or Hobie 18.  Hobie Part# 61080000
    H-17/18 MAST SEAL PLATE
    Hobie
    Rudder Pins H17/18 Stainless Steel Murrays Part# 001-4273 Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings. Cotter pins are included. Alternative to Hobie Cat® #60880011.  (* Pre EZ LOC Rudder c
    H-17/18 RUDDER PINS PR (SS)
    Murrays Sports
    Rudder Locking Kit Hobie 17, 18, 20, 21 Murrays Part# 001-3552 The Rudder Locking Kit Hobie 17, 18, 20, 21 includes the rudder spring, rudder casting screw, and the rudder plunger for the Hobie 17, 18, 20 and 21. Delrin screw is 3/4-10 thread. In many cases you can drill it out with a 5/8" drill bit and then get a 3/4-10 tap to clear the threads.
    H-17/18/20 and 21 RUDDER LOCKING KIT
    Murrays Sports
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    Rudder Cam Screws H17, H18, H20, Older Wave and Getaway Murrays Part# 001-3551 The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable. Compare to Hobie Cat® #5203 and #50312301. Sold in pairs
    H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS
    Murrays Sports
    Rudder Return Kit: H17/18/21 Murrays Part# 012-2059 Help prevent your rudders from constantly kicking up with the Rutter return kit. Originally from TrenTec, now made by Murrays Sports.
    H-17/18/21 RUDDER RETURN KIT
    Tren-Tec
    Hobie 18 rudder plunger. Hobie Part number 50312201. Also use on the 17 as well as the older Wave and Getaway
    H-17/18/GETAWAY RUDDER CAST PLUNGER
    Hobie
    Rudder Pins H17, H18, Wave, Getaway (Aluminum) Murrays Part# 001-4274 Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included.  Sold in pairs Compare to Hobie Cat® #60880001
    H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS
    Murrays Sports
    clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra. Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.  Compare to Hobie Cat #30317.
    H-17/20/NACRA PINS AND RINGS KIT
    Murrays Sports
    Mast Ball H17 Wave Murrays Part# 50-50212301 Hobie factory replacement mast ball for Hobie® 17 and Wave. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. This ball can also be glued for use on Trac 16.
    H-17/WAVE MAST BALL
    Hobie
    H17 Sport Upper Forestay 5/32" Black Wire Murrays Part# 002-0335-02 Black upper forestay for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52812011
    H-17S UPPER FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H18 1-Piece Bias Cut Trampoline-Black Murrays Part# 30-3103-2 This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials.
    H-18 1PC BIAS CUT TRAMPOLINE-BLACK
    Murrays Sports
    H18 Black 3 Piece Trampoline Murrays Part# 30-3103 Murrays black mesh tramp for Hobie® 18 is not Class-legal for racing. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. The Hobie 18 version comes with a sewn in pocket in the front for your halyard and jib furling line.
    H-18 3PC MESH TRAMPOLINE-BLACK
    Murrays Sports
    HOBIE 18 POWER DOWNHAUL KIT - 5:1 Get powerful downhaul adjustment from any sailing position. This Class-legal, 5:1 downhaul kit for Hobie® 18 includes a space-saving bracket with becket, two Harken bullet cheek blocks, Harken pivoting exit block with micro cleat, Harken double bullet block, trim line, fasteners and instructions.
    H-18 5:1 POWER DOWNHAUL KIT
    Murrays Sports
    H18 Aft Crossbar Extrusion-Black Murrays Part# 50-60191211 Hobie® factory replacement H18 Black Aft Crossbar Extrusion.
    H-18 AFT CROSSBAR EXTRUSION-BLACK
    Hobie
    H18 Angled Luff Batten Caps Murrays Part# 012-4005 No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1563 Sold in packages of 10
    H-18 ANGLED LUFF BATTEN CAPS
    Tren-Tec
    H18 Assembly Manual Murrays Part# 50-63450000 Printout of H18 assembly manual PDF.
    H-18 ASSEMBLY MANUAL
    Murrays Sports
    H-18 BENT TILLER ARM-USED
    Hobie
    Boom Outhaul Bearing H18 Murrays Part# 50-60240000 Boom bearing for Hobie 18 outhaul system
    H-18 BOOM OUTHAUL BEARING
    Murrays Sports
    Hobie 18 Bridle wire - Hobie part number #60820001 white or #60822001 black.
    H-18 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    HOBIE 18 CHANNEL RETAINING PLATE HOBIE PART NUMBER 61110000
    H-18 CHANNEL RETAINING PLATE
    Murrays Sports
    H18 Compression Sleeve Murrays Part# 50-61490000 Hobie® factory replacement compression sleeve for mast of Hobie 18.
    H-18 COMPRESSION SLEEVE
    Hobie
    H18 Cotter Pin for Traveler Murrays Part# 50-8060121 Hobie® factory replacement 3/32" x 2" stainless steel cotter pin is used on Hobie 18 main traveler car. Hobie Part# 8060121
    H-18 COTTER PIN FOR TRAVELER
    Hobie
    H18 Diamond Spreader Tang Murrays Part# 50-61410000 Hobie® factory replacement diamond spreader tang for Hobie® 18.
    H-18 DIAMOND SPREADER TANG
    Hobie
    H18 Diamond Wire Complete Murrays Part# 50-61750001 Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.
    H-18 DIAMOND WIRE COMPLETE
    Hobie
    H18 Dimond Wire without Turnbuckle Murrays Part# 002-0494-20 Diamond wire for one side of a Hobie® 18 is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Please note: The diamond wire will be constructed with a stud that has left hand threads. Please contact Murrays if you have an older Hobie® 18, as right hand threads may be required. The change to the left handed thread happened some time in the early 80's.
    H-18 DIAMOND WITHOUT TURNBUCKLE
    Murrays Sports
    H18 Diamond Wire with Turnbuckle Murrays Part# 002-0494-40C​ Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles. Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging.
    H18 Diamond Wire with Turnbuckle Murrays Part# 002-0494-40C​ Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles. Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Note: The H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging. Compare to Hobie Part# 61750001
    H-18 DIMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    H18 Dolphin Striker Post Murrays Part# 50-60140001 Replacement dolphin striker post for the Hobie 18 sailboat. Hobie Part# 60140001
    H-18 DOLPHIN STRIKER POST
    Hobie
    H18 Dolphin Striker Rod Murrays Part# 50-61170001 Hobie® factory replacement dolphin striker rod for Hobie 18.
    H-18 DOLPHIN STRIKER ROD
    Hobie
    Downhaul Kit 8:1 H18 Murrays Part# 001-2150 This is a performance upgrade downhaul kit that give increased performance control for your Hobie 18 Catamaran. The downhaul leads are run to the side of the boat for crew control and the loads are oriented to reduce sail tack damage that is common on the H18. It takes minutes to install with a rivet gun a drill and approximate measuring. The kit was born from a discussion at the 2023 NACs wherein many of the boats in Division 4 have a variation of the
    H-18 DOWNHAUL KIT 8:1
    Murrays Sports
    H18 Halyard Lock (Comptip) Murrays Part# 50-61610101 Halyard hook for Hobie 18 comptip mast assembly. Hobie Part# 61610101
    H-18 HALYARD HOOK (COMPTIP)
    Hobie
    H18 Illustrated Part List Murrays Part# 50-87166810 Hobie® factory publication aids in identifying parts for the Hobie® 18 and 18SX. The parts list is also available for free download at the Hobie Cat® Web site.
    H-18 ILLUSTRATED PARTS LIST
    Murrays Sports
    H18 Jib Furler Bearing (Cage) Murrays Part# 50-61930000 Hobie® factory replacement bearing cage for Hobie® roller furler drum #50-61900000. Hobie Part# 61930000
    H-18 JIB FURLER BEARING (CAGE)
    Hobie
    H18 Jib Furler Bearing (Race) Murrays Part# 50-61920000 Hobie® factory replacement bearing race for Hobie roller furler drum. Hobie Part# 61920000
    H-18 JIB FURLER BEARING (RACE)
    Hobie
    The Murrays Hobie 18 line package contains all the lines on a Hobie 18. We use Mainly Robline Neptune 500 for the sheets and Pelican VLS, Very Low Stretch, for the control lines. Main Sheet Jib Sheet Daggerboard Handles Outhaul Downhaul Mast Rotation Main Halyard Trampoline Lacing Lines Trapeze Adjustment Line Batten Ties Roller Furline line Jib Halyard Jib Luff Tension Line
    H-18 LINE PACKAGE
    Murrays Sports
    Recently viewed