In Stock

In Stock

2397 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2397 products
    H14/16 Rudder Return Hand Shock Cord Murrays Part# 001-2240 Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.
    H-14/16 RUDDER RETURN HAND SHOCK CORD
    Murrays Sports
    Hobie 16 spare parts kit, shackle tool, drain plugs, rudder pins, clevis pins and rings, 3/16" bow shackle, 1/4" bow shackle, batten tie strings, and 3 mast bearings. Pouch comes in assorted colors as available. Hobie #30305 and #30306.
    H-14/16 SPARE PARTS KIT:
    Murrays Sports
    Hobie trapeze shock cord 20730001 and 20730002
    H-14/16 TRAP SHOCK CORD
    Murrays Sports
    H14/16 Upper Gudgeon Murrays Part# 25-3351 This latest, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    H-14/16 UPPER GUDGEON
    Murrays Sports
    H14/16/17/18 Line Catcher-Black Murrays Part# 30-3530 The Hobie Trampoline Line Catcher is a strip of mesh trampoline that fits in between your center trampoline lacing to prevent lines and other items from falling through the lacing. Works on all 3 piece Hobie 14, 16 and 18 trampolines.
    H-14/16/17/18 LINE CATCHER-BLACK
    Murrays Sports
    H14/16/17/18 Gudgeon Lower Murrays Part# 25-3352 The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set . Replacement for Hobie Part# 50101401
    H-14/16/17/18 LOWER GUDGEON
    Murrays Sports
    Batten Cap Leech H14/16/17/18 Main E Murrays Part# 012-3003-1 No more knots at the trailing edge. Adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual batten cap for Hobie 14, 16, 17 or 18 main sail. Mainsail batten cap for Saturn shape main sail battens used on Hobie, Prindle some Nacra sails. Trentec part number BC-HM Compare to Hobie 11323000 Sold individually 
    H-14/16/17/18 MAIN BATTEN LEECH CAP
    Tren-Tec
    STRETCH RIGHTING H14/16/17/18 Murrays Part# 001-3294 The Murrays Stretch Righting Kit is our most popular righting line kit for catamarans such as Hobie® 14, 16, 17, 18 and 18SX. If the bow starts to bury, the line is readily available to both skipper and crew who can anchor themselves to keep from being catapulted forward. This beautifully simple system features easy-to-grip, 1/2" hollow braid line with internal shock cord that stretches for righting or trapezing and then recoils automatically
    H-14/16/17/18 STRETCH RIGHTING
    Murrays Sports
    H14/16/18 Dyneema Race Tramp Lace Kit Murray Part# 001-2242-1 Tramp Lace Kit H14 H16 H18 - Dyneema Race Kit uses Dyneema® which is the best choice for racers or other sailors looking for the ultimate in strength, light weight, and very low stretch characteristics in their tramp line lacing. Dyneema® has excellent ultraviolet and abrasion-resistance properties for longevity.
    H-14/16/18 DYNEEMA RACE TRAMP LACE KIT
    Murrays Sports
    H14/16/18 Gooseneck Boom Pin Murrays Part# 50-10772010 Hobie® factory gooseneck boom pin for Hobie® 14, 16 or 18.
    H-14/16/18 GOOSENECK BOOM PIN
    Hobie
    Tramp Line Kit: H14/16/18 Murrays Part# 001-2242 Tramp Line Kit: Hobie 14, Hobie 16, Hobie 18: low stretch line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking. The kit contains three lengths of 3/16" 8-strand black low-stretch line (one piece 33', two pieces 15') and lacing instructions. This kit will lace all factory and most aftermarket t
    H-14/16/18 LOW STRETCH TRAMP LINE KIT
    Murrays Sports
    Shock Cord Tramp Lacing Kit H14/16/18 Murrays Part# 001-2241 Shock Cord Tramp Lacing Kit H14, 16, 18 is for the recreational sailor who is lacing a trampoline. Shock Cord is usually the better choice over line tramp lacing. Just "set it and forget it" because shock cord maintains the tension you set when lacing your tramp. Shock cord also reduces tramp and grommet wear because the load is spread over multiple grommets, especially when walking on the tramp. The latest technology shock cord used in our kits
    H-14/16/18 SHOCK CORD TRAMP LACING KIT
    Murrays Sports
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    H14/17 Adjustable Batten Leech Caps Murrays Part# 012-2003 No more knots at the trailing edge. Adjust Hobie® 14 or Hobie® 17 sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes pre-cut line Hobie Part# 1521 Sold in packages of 6
    H-14/17 ADJUSTABLE BATTEN LEECH CAPS (6)
    Tren-Tec
    Mast Hinge H-16 (Only) Murrays Part# 25-3360 Heavy duty mast base hinge for Hobie® 16 only (does not fit Hobie 14). Clevis pins are sold separately. NOTE: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. The way to tell is if your mast step has a horizontal mast base then it is old style, new style has a slant toward the stern.
    H-16 (ONLY) MAST HINGE
    Murrays Sports
    H-16 1-PIECE BIAS CUT MESH TRAMPOLINE-BLACK
    Murrays Sports
    H-16 3-PIECE MESH TRAMPOLINE-BLACK
    Murrays Sports
    Hobie 16 turquoise mesh trampoline Hobie 20970058
    H-16 3-PIECE TEFLON TRAMPOLINE-BLUE
    Murrays Sports
    Clew Kit 5-Hole (H16 Jib) Murrays Part# 001-1012 Clew kit for Hobie® 16 jib includes one pair of anodized aluminum plates with rivets to be set with a hammer. Each plate has five holes and measures 8" maximum length by 1-1/2" wide. Replacement rivets are available separately (#19-5006). This product replaces discontinued item #50-22240000.
    H-16 5 HOLE JIB CLEW KIT
    Murrays Sports
    Adjustable Leech Batten Caps H16 Murrays Part# 012-3003 No more knots at the trailing edge. Adjustable batten caps for Hobie® 16 enable sail shape adjustment in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 8 batten caps and pre-cut line.
    H-16 ADJUSTABLE BATTEN LEECH CAPS (8)
    Tren-Tec
    H16 Aluminum Masthead Murrays Part# 51-16042710
    H-16 ALUMINUM MASTHEAD
    Hobie
    H16 Angled Luff Caps Murrays Part# 012-3005 No more battens poking through next to the mast! Tren Tec luff batten caps for Hobie® 16 main sail prevent batten splitting and align batten to the angle of the sail. Glue cap to the forward end of the batten. Hobie Part# 1562 Sold in packages of 8
    H-16 ANGLED LUFF CAPS (8)
    Tren-Tec
    H16 Assembly Manual Murrays Part# 50-23450000 Hobie Cat® factory manual for the Hobie 16®. The manual is also available for free download at the Hobie Cat® Web site.
    H-16 ASSEMBLY MANUAL
    Hobie
    The Aussie forestay replaced the original upper and lower forestay system in 2009 on the Hobie 16 as the factory standard. It is modeled after what the dominant Aussie racers using on their boats. Aussie forestays are longer than the classic halyard forestays actually have a separate connection cable for the jib halyard. The separate attachment point for the jib halyard provides a back up if either were to fail. If either the forestay or jib halyard were to break, the other will hold the m
    H-16 AUSSIE FORESTAY
    Murrays Sports
    The Aussie Jib Halyard Kit for the Hobie 16 allows easier tacking, better mast rotation and consistent mast bend! Reduce mast compression by 66%!  Use with one piece Aussie Jib Forestay. Or use an upper forestay and a separate Aussie Forestay. The Hobie 16 Aussie Jib Halyard Kit includes everything you need to connect your jib halyard to the Aussie forestay Pigtail: hardware with all Harken blocks, 70' of pre-stretched line, fairlead with rivets, zippered pouch and instructions. Class legal for racing.
    Hobie 16 Aussie Jib Halyard Kit with Pigtail Murrays Part# 001-3302 Reduce mast compression by 66%! The Aussie Jib Halyard Kit for the Hobie® 16 allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new Hobie 16's. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions. 80660000
    H-16 AUSSIE JIB HALYARD KIT
    Murrays Sports
    Hobie 16 Aussie Jib Halyard Kit with Pigtail Murrays Part# 001-3302 Reduce mast compression by 66%! The Aussie Jib Halyard Kit for the Hobie® 16 allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new Hobie 16's. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions. 80660000
    H-16 AUSSIE JIB HALYARD KIT WITH PIGTAIL
    Murrays Sports
    Aussie Jib Halyard Pigtail Murrays PN 002-0284-00R Jib halyard pigtail for the Aussie system on a Hobie 16.  Constructed with 1/8" 7x19 bare wire. Compare to Hobie part number 20810041. This model is built to the 2009 factory spec. ​Often paired with a 28-0186 Harken Fiddle Block.
    H-16 AUSSIE JIB HALYARD PIGTAIL
    Murrays Sports
    H16 Aussie Pigtail Assy Replacement 5/32" pigtail for Aussie jib halyard kit for Hobie® 16 (#01-3302)
    H-16 AUSSIE PIGTAIL ASSY
    Murrays Sports
    The Hobie 16 Aussie upper forestay runs parallel to the Aussie Forestay and is for the jib halyard line. The Jib Halyard line raises and jib and controls the mast rake. It runs from the top of the jib, thru the fiddle blocks and down the mast to the halyard cleat. The Aussie system provides a 4:1 pulley system to allow for easy mast rake adjustment on the fly and the independent forestay provides redundant a safety system if the jib luff wire or the jib halyard were to break. Hobie part number 20810041
    H-16 AUSSIE UPPER FORESTAY
    Murrays Sports
    Hobie 16 Batten Tie Set Murrays Part# 001-3816 4 x jib batten ties and 8 main sail batten ties.
    H-16 BATTEN TIE SET
    Murrays Sports
    Hobie 6 BRIDLE WIRE The H-16 Bridle Wire is one bridle for Hobie 16 constructed of 316 stainless steel wire to factory specifications. We recommend purchasing two bridles in order to ensure equal length and strength of your bridle wires. Wire lengths changed over the years, please select the appropriate bridle wires for your boat. We recommend Black coated for the longest lifespan.
    H-14 Bridle 1/8" Single bridle for Hobie 14 constructed of 1/8" 1x19 wire to factory specifications.  This is for Hobie 14s without jibs. Use this page to order product numbers: 02-0114-01 White 02-0114-02 Black Compare to Hobie Cat® #10822101
    H-16 BRIDLE WIRE
    Murrays Sports
    H16 Left Front Corner Casting Murrays Part# 50-10152011 Left front corner casting. Fits Hobie 16 boats without integrated tracks and jib traveler control systems. DOES NOT INCLUDE traveler control sheave space.
    H-16 CORNER CASTING FRONT LEFT
    Hobie
    H16 Corner Casting Right Front Race Murrays Part# 50-10162011 This is an OEM replacement for the current production of Hobie 16 sailboats.
    H-16 CORNER CASTING FRONT RIGHT-RACE
    Hobie
    H16 Dolphin Striker Post Murrays Part# 50-20140001 Hobie® factory replacement dolphin striker post fits all Hobie® 16 mast steps (older and newer)
    H-16 DOLPHIN STRIKER POST
    Hobie
    H16 Dyneema Trapeze Lines Murrays Part# 002-0264 Hobie has approved Dyneema trap lines for class racing as of 2016.
    H-16 DYNEEMA TRAPEZE LINES
    Murrays Sports
    Murrays Hobie 16 forestay 1/8" Black
    Murrays Hobie 16 forestay 1/8" Bare
    H-16 FORESTAY 1/8" WIRE
    Murrays Sports
    H-16 FRONT CROSSBAR WITH CASTINGS-USED
    Hobie
    H16 Forward Crossbar with Mast Step Murrays Part# 50-25131910 This is the current production front Crossbar for a Hobie 16. It includes the integrated traveler track and the updated mast step. Hobie® factory replacement forward crossbar for 1994 or later Hobie 16's with integrated track. Hobie Part# 25131910
    H-16 FROWARD CROSSBAR WITH MAST STEP
    Hobie
    H-16 GLOBAL EDITION
    Hobie
    Batten Caps Luff H16 Jib (Pack of 4) Hobie Part# 012-3006 No more battens poking through next to the mast. This Tren Tec item includes four Hobie® 16 jib luff batten caps to prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Cat® uses #1566 for this item
    H-16 JIB BATTEN LUFF CAPS (4)
    Tren-Tec
    Recently viewed