Hobie 18 Parts

Hobie 18 Parts

357 products

    Parts for your Hobie 18

    357 products
    Sale
    H18 Jib Block System -used complete
    Murrays Sports
    Save $190
    Oxen self-holding blocks offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use.
    Oxen block with becket - Hobie, Nacra, Prindle, jib sheet, main sheet
    3" OXEN BLOCK WITH PIN & BECKET
    Oxen
    Out of Stock
    Crossbar Casting Front Right H18-Black Murrays Part# 50-60160011 Hobie® factory replacement right front crossbar casting for Hobie® 18 Hobie Part# 60160011
    H-18 CROSSBAR CASTING FRONT RIGHT-BLACK
    Hobie
    Out of Stock
    ROLLER FURLING DRUM REBUILT
    Hobie
    Save $129
    Hobie 1953 tiller connection kit - new style
    HOBIE TILLER CONNECTOR KIT
    Hobie
    57mm Harken Ratchamatic Block — Swivel, Becket, Cam Cleat Murrays PN 28-2628 ​The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. Harken Part No. 2628​ HOBIE 18 JIB SHEET BLOCK - HARKEN 60330041
    HARKEN 57MM RATCHAMATIC - SWIVEL, BECKET, CAM CLEAT
    Harken
    Out of Stock
    H18 Crossbar Casting Rear Left Black Murrays Part# 50-60210011 Hobie® factory replacement left rear crossbar casting for Hobie® 18
    H-18 CROSSBAR CASTING REAR LEFT-BLACK
    Hobie
    Out of Stock
    Fiberglass Tiller H14/16 Murrays Part# 50-20550001 84" Hobie Fiberglass Tiller Extension The 84" Hobie Fiberglass Tiller Extension is the Hobie factory 84" fiberglass tiller extension with hinge for the Hobie 14 or 16. This stick can be cut to 60" for Getaway or Wave.
    H-14/16 FIBERGLASS TILLER
    Hobie
    Hobie 18 main sheet traveler car assembly - Hobie part number 61800001 - Murrays.com
    Traveler Car Assembly H18 Complete - 61800001 - Murrays.com
    H-18 TRAVELER CAR ASSEMBLY
    Hobie
    Out of Stock
    Hobie Rudder Blade - White Nylon Murrays Part# 50-20493000 The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder. Hobie Part# 20493000
    HOBIE RUDDER BLADE - WHITE NYLON
    Hobie
    Rudder Blade EZ Lock With Indents Murrays Part# 50-20491000 Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems
    RUDDER BLADE EZ LOCK WITH INDENTS
    Hobie
    CAT TRAX CRADLES (PAIR)
    Cat Trax
    HOBIE 18 POWER DOWNHAUL KIT - 5:1 Get powerful downhaul adjustment from any sailing position. This Class-legal, 5:1 downhaul kit for Hobie® 18 includes a space-saving bracket with becket, two Harken bullet cheek blocks, Harken pivoting exit block with micro cleat, Harken double bullet block, trim line, fasteners and instructions.
    H-18 5:1 POWER DOWNHAUL KIT
    Murrays Sports
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    Murrays Hobie 18SX line package contains all the lines on a Hobie 18SX. The pack utilizes Robline Neptune 500 for the main and jib sheets and Pelican VLS, Very Low Stretch, for the control lines.  The Hobie 18 SX has wings that extend fore and aft of the front and rear crossbars and a taller mast, 29'7". Main Sheet Jib Sheet Daggerboard Handles Outhaul Downhaul Mast Rotation Main Halyard Trampoline Lacing Lines Trapeze Adjustment Line Batten Ties Roller Furline line Jib Halyard Jib L
    H-18SX LINE PACKAGE
    Murrays Sports
    The Murrays Hobie 18 line package contains all the lines on a Hobie 18. We use Mainly Robline Neptune 500 for the sheets and Pelican VLS, Very Low Stretch, for the control lines. Main Sheet Jib Sheet Daggerboard Handles Outhaul Downhaul Mast Rotation Main Halyard Trampoline Lacing Lines Trapeze Adjustment Line Batten Ties Roller Furline line Jib Halyard Jib Luff Tension Line
    H-18 LINE PACKAGE
    Murrays Sports
    Out of Stock
    H18 Mast Step Kit Murrays Part# 50-60180011 Hobie® factory replacement mast step kit for Hobie® 18 includes mast step casting, post, bearing, screw and washer. This is an upgrade for older Hobie 18's with threaded post.
    H-18 MAST STEP KIT
    Hobie
    Out of Stock
    H14/18/18SX/20/Wave Comp-tip Luff Track 87" Murrays Part# 50-38584001 Hobie factory replacement 87" luff track for Hobie Cats except Hobie 16 and Getaway.  Older H18 comp tips were one long piece of plastic, newer boats have two sections. This plastic piece, and shorter aluminum piece. If you are replacing an older one piece luff track, you will also need to purchase the aluminum top section as well.
    H-14/18/18SX/20/WAVE COMP-TIP LUFF TRACK
    Hobie
    Out of Stock
    H18 Crossbar Casting Right Rear-Black Murrays Part# 50-60200011 Hobie® factory replacement right rear crossbar casting for Hobie® 18
    H-18 CROSSBAR CASTING RIGHT REAR-BLACK
    Hobie
    The Murrays Jib Snorkel will protect your roller furling jib from ultraviolet light and weather while on or off the boat.
    MURRAYS JIB SNORKEL
    Murrays Sports
    H-18 UPPER RIGHT RUDDER CASTING WITH TILLER ARM-USED
    Hobie
    H18 Diamond Wire with Turnbuckle Murrays Part# 002-0494-40C​ Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles. Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging.
    H18 Diamond Wire with Turnbuckle Murrays Part# 002-0494-40C​ Diamond wire for one side of a Hobie® 18 or 21SC is constructed with 1/8" 1x9 bare wire, stainless fork, jib roller and turnbuckles. Also used on the the Hobie 21SC is sometimes confused with the H21SE (Special Edition). Note: The H21SC is differentiated by its 8.5' beam, front tramp and Hobie® 18 rigging. Compare to Hobie Part# 61750001
    H-18 DIMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Ronstan Series 55 Orbit Block, Ratchet with Becket and Cam Cleat Murrays Part# 21-56130 The Ronstan Orbit 55 Jib Block Ratchet Orbit Block™ has the highest holding power available and is ideal as a jib sheet cleat for the Hobie® 18, Hobie® 20, etc. The automatic ratchet mechanism engages when load is applied, but switches off when it's released.
    RONSTAN SERIES 55 ORBIT BLOCK, RATCHET WITH BECKET AND CAM CLEAT
    Ronstan
    Out of Stock
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-6040000M Murrays Tiller Crossbar connection kit is a complete kit to connect the Hobie tiller cross bar and tiller arms. This is modeled after the original design but with some upgrades. We use 2 adjustable end caps to extend the overall adjustment length. Allows users shorten their tiller crossbar due to corrosion. 2 adjustable caps also allows users to adjust the crossbar length from either end of the bar. The tiller crossbar
    TILLER CROSSBAR ADJUSTABLE CAP KIT
    Murrays Sports
    84" Murrays Fiberglass Tiller Extension Murrays Part# 001-1320 The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by an A Fleet Racer looking for a lighter more economic alternative. Murrays helped get them into production and here they are! Features: 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top 84" fixed length Weight: 3/4 lb.
    MURRAYS 84" FIBERGLASS TILLER EXTENSION
    Murrays Sports
    Hobie 18 TRAPEZE WIRE - WHITE 1473W, BLACK 1473B
    H-18/21SC DOUBLE TRAPEZE (4)
    Murrays Sports
    Out of Stock
    POWER RIGHTING SYSTEM WITHOUT POLE
    Murrays Sports
    H18 SX Double Trapeze (4 handles) The SX has a taller mast and longer trap wires than the standard Hobie SE and Magnum versions. The Murrays Double Trapeze is a set of 4 black or white coated trap wires with 4 handles for double trapezing. A single thimble per pair of handles eliminates clutter at that mast connection. Order shock cord, harness loops and adjustment kits separately. A complete trapeze system requires the following: Harness loop - Can't Miss Ring or Dogbone Trap Shock Cord Trap Adj
    H-18SX DOUBLE TRAPEZE (4)
    Murrays Sports
    Sale
    Murrays Deluxe Sail and Boom Bag - Will fit any Hobie sail, compatible with all Nacra and Prindle sails as well. The Hobie 16 has the widest sail of any Hobie and at a width of 109″
    Murrays Deluxe Sail and Boom Bag - Will fit any Hobie sail, compatible with all Nacra and Prindle sails as well. The Hobie 16 has the widest sail of any Hobie and at a width of 109″
    MURRAYS DELUXE SAIL AND BOOM BAG
    Murrays Sports
    Save $50
    H18 Diamond Wire Complete Murrays Part# 50-61750001 Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.
    H-18 DIAMOND WIRE COMPLETE
    Hobie
    Hawaiian Catamaran Righting System H17/18/Prindle Murrays Part# 001-4293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    H-17/18/PRINDLE HAWAIIAN CATAMERAN RIGHTING SYSTEM
    Murrays Sports
    H18SX Forestay 5/32" Black Wire Murrays Part# 002-0645-12 Black forestay for Hobie® 18SX is constructed to factory specifications. Compare to Hobie Cat® Part# 68814501
    H-18SX FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H18SX Upper Forestay 5/32" Black Wire Murrays Part# 002-0635-02 Black upper forestay for Hobie® 18SX is constructed to factory specifications. Compare to Hobie Cat® Part# 68813501
    H-18SX UPPER FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    H-18/21SC UPPER FORESTAY 5/32" WIRE
    Murrays Sports
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    H18 Dolphin Striker Rod Murrays Part# 50-61170001 Hobie® factory replacement dolphin striker rod for Hobie 18.
    H-18 DOLPHIN STRIKER ROD
    Hobie
    H18SX Diamond Wire without Turnbuckle Murrays Part# 002-0694-20 Diamond wire for Hobie® 18SX is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Compare to Hobie Cat® Part# 68750001
    H-18SX DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    Rear Inboard Support Casting Kit Murrays Part# 50-61040001 Hobie® factory rear inboard support casting kit. Requires one per side. Hobie Part# 61040001
    REAR INBOARD SUPPORT CASTING KIT
    Hobie
    H18 Boom Outhaul Car Assembly Murrays Part# 50-60220001 Hobie® factory replacement outhaul car assembly for Hobie® 18. Outhaul and shock cord are not included. For outhaul line, order 7' of 3/16" black line #39-2311BK. For outhaul shock cord, order 7' of #39-7491 black 1/4" shock cord.
    H-18 BOOM OUTHAUL CAR ASSEMBLY
    Hobie
    H18 Dimond Wire without Turnbuckle Murrays Part# 002-0494-20 Diamond wire for one side of a Hobie® 18 is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included. Please note: The diamond wire will be constructed with a stud that has left hand threads. Please contact Murrays if you have an older Hobie® 18, as right hand threads may be required. The change to the left handed thread happened some time in the early 80's.
    H-18 DIAMOND WITHOUT TURNBUCKLE
    Murrays Sports
    Recently viewed