Hobie 17

Hobie 17

246 products
    246 products
    Out of Stock
    Hobie Boom Blocker Hanger  Murrays Part# 50-10760000 Hobie factory boom block hanger for the Hobie 14, 16, 17 and 18. Hole spacing is 1-1/8".  Use four 6-4 rivets (#19-5031) for installation.
    HOBIE BOOM BLOCKER HANGER
    Hobie
    Oxen blocks are the ultimate high tech, self-holding jib blocks that offer a real advantage over blocks with cleats! Get fast, simple mainsheet (and jibsheet) control: just pull-to-cleat, then pull-to release! Cleat or uncleat your jib or mainsheet every time without looking and from any position. Cleat from any angle or position on the boat, including the wings, even if your sheet passes over something en route. Oxen blocks are easy to install and foolproof to use. Expensive, but the best is rarely cheap!
    OXEN BLOCK WITH PIN - CLEATING BLOCK
    Oxen
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1"
    Misc
    Out of Stock
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-6040000M Murrays Tiller Crossbar connection kit is a complete kit to connect the Hobie tiller cross bar and tiller arms. This is modeled after the original design but with some upgrades. We use 2 adjustable end caps to extend the overall adjustment length. Allows users shorten their tiller crossbar due to corrosion. 2 adjustable caps also allows users to adjust the crossbar length from either end of the bar. The tiller crossbar
    TILLER CROSSBAR ADJUSTABLE CAP KIT
    Murrays Sports
    Out of Stock
    Soft Grip Standard Extension .570 x 11" Murrays Part# 007-3206 This is a grip upgrade for the standard Hobie Tiller extension, it will also fit the Murrays fixed tiller extension as well. Hobie Part# 3206
    SOFT GRIP STANDARD EXTENSION .570 x 11"
    Hobie
    Hobie Drain Plug Screw Murrays Part# 50-8031731 This screw is used to hold the rudder housing in the back of many of the Hobie Beach cats. H14, H16, H17, H18 Hobie Part# 8031731
    HOBIE DRAIN PLUG SCREW
    Hobie
    Gooseneck Boom Pin Murrays Part# 50-50502201 Hobie Cat gooseneck boom pin for securing boom assembly to mast at the gooseneck joint. Hobie Part# 50502201
    HOBIE GOOSENECK BOOM PIN
    Hobie
    Hobie 17 Sport Jib Halyard with Shackle - 52661001 Murrays Part# 002-0386-00 Jib halyard with shackle for Hobie 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52661001
    H-17 SPORT JIB HALYARD WITH SHACKLE
    Murrays Sports
    Solid Rivet 1/8 x 5/16" Brass Murrays Part# 19-5004 Solid Rivet 1/8 x 5/16 Brass Used on sail headboards, clew and tack plates. Hobie Part# 8010020
    SOLID RIVET-BRASS 1/8"
    Misc
    H17 Trapeze Wires (2) The H17 Trapeze Wires (2) basic trapeze assembly includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order with a trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) and it will be added to wire with no installation charge. Compare to Hobie part number 1471B. ​Order shock cord, Can't miss rings/dog bones and adjustment kits separately. Murrays PN 002-0353-01 002-0353-02
    H-17 TRAPEZE WIRES (2)
    Murrays Sports
    H17 Forestay 1/8" The H17 Forestay 1/8" for Hobie® 17 is constructed to factory specifications. Choose from White or Black wire coating. Compare to Hobie Cat® #50701201.
    H-17 FORESTAY 1/8" WIRE
    Murrays Sports
    The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet! Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.
    UNIVERSAL SUREFOOT EVA KIT
    Murrays Sports
    Washer 5/16 X 9/16 Flat Murrays Part# 50-8080181 Hobie Part# 8080181
    WASHER FLAT 5/16 X 9/16"
    Hobie
    Out of Stock
    HOBIE SAIL AND BOOM BAG STANDARD
    Hobie
    Out of Stock
    HOBIE TRACKER CAR COMPLETE NEW (POST93)
    Hobie
    Screw PHMS #10-32 X 1 Stainless Steel Slot Head Murrays Part# 19-2915 Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112. Also used in some Hobie Applications, compare to 8030111 Hobie Part. Applications: H18/18 SX/16 and Getaway Tiller Hinge Screw: 2
    SCREW PHMS #10-32 X 1" (SS)
    Misc
    Bolt Hex Head 5/16-18 X 1.5" Murrays Part# 19-2229 Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting. Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    Harken Cleat Adapter with Hardware Murrays Part# 007-50010 Hobie Factory Part 50010
    CLEAT ADAPTER PLATE WITH HARDWARE
    Hobie
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc
    H17 Bridle 1/8" The H17 Bridle 1/8" is one bridle for Hobie® 17 constructed of 1/8" wire to factory specifications. Choose from White or Black wire coating. Compare to Hobie Cat Part Number 50701101.
    H-17 BRIDLE 1/8" WIRE
    Murrays Sports
    Out of Stock
    Hawaiian Catamaran Righting System H17/18/Prindle Murrays Part# 001-4293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    H-17/18/PRINDLE HAWAIIAN CATAMERAN RIGHTING SYSTEM
    Murrays Sports
    Comptip Cap Plug Murrays Part# 50-8090900 This part is used to seal the hole in the Comptip of a Hobie cat after the expanding foam has been put in. Hobie Part# 8090900
    COMP-TIP CAP PLUG
    Hobie
    Out of Stock
    Tracker Car Complete (Pre-1994) Murrays Part# 007-1050 This tracker car is the standard replacement part for all 1993 and earlier Hobie® 14, 16 and 17 main tracker traveler assemblies. Includes 2-3 rivets where required. Hobie Cat® factory item #105.
    TRACKER CAR COMPLETE (PRE'94)
    Hobie
    Rudder Pins H17/18 (Nylon) Murrays Part# 001-4271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair).
    RUDDER PINS H-17/18 PR (NYLON)
    Murrays Sports
    HARKEN 57MM TRIPLE RATCHET BLOCK-SWIVEL, CAM CLEAT
    Harken
    EASY RIGG TOOL GREEN
    Murrays Sports
    Out of Stock
    ROLLER FURLING DRUM REBUILT
    Hobie
    Save $80
    H17 Mast Base Washer Murrays Part# 50-52411001 Replacement washer for Hobie 17 mast base assembly. Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    WASHER #8 (WH NYLON) Murrays PN 19-4006WH White nylon washer is used for installation of access ports (hatches).
    WASHER #8 WHITE NYLON
    Misc
    H-17 Shroud 1/8″ The H17 Shroud 1/8″ is a single shroud for Hobie® 17 constructed with 1/8″ wire to factory specifications. Each. Choose from White or Black wire coating. Purchase two to ensure equal lengths. Use this page to order product numbers: 002-0304-01 White with thimble/thimble fittings (compare to Hobie Part Number 20790011) 002-0304-02 Black with thimble/thimble fittings (compare to Hobie Part Number 20792011)
    H-17 SHROUD 1/8" WIRE
    Murrays Sports
    H17 Shroud 1/8″ The H17 Shroud 1/8″ is a single shroud for Hobie® 17 constructed with 1/8″ wire to factory specifications. Each. Choose from White or Black wire coating. Purchase two to ensure equal lengths. Thimble/marine eye upgrade Hydraulic swaging produces a cleaner, stronger shroud. A marine eye is installed at the bottom end fitting where breakage commonly occurs. Electrolysis is reduced because both wire and marine eye are stainless steel. Wire manufacturers recommend stainless steel marine
    H-17 SHROUD 1/8" BLACK WIRE
    Murrays Sports
    Out of Stock
    Power Righting System I Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    Out of Stock
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Tracker Hinge Upright Murrays Part# 007-1054 The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's. Fits: Hobie Getaway Main Traveler Car Hobie Cat® Part# 11840100
    TRACKER UPRIGHT HINGE
    Hobie
    TRACKER HINGE PIN
    Hobie
    SAIL "HC" LOGO U-CUT PR BLACK
    Murrays Sports
    Nut Nylock #10-32 Stainless Steel Thick Murrays Part# 19-2515 Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed. Fits Hobie Main Traveler Car. Fits Hobie Tiller Hinge Screw. Fits Hobie Masthead Sheave Screw H16 Hobie Getaway Compare to Hobie Part Number 8050201
    NUT NYLOCK #10-32 (SS) THICK
    Misc
    H17 Sport Forestay 5/32" Murrays Part# 002-0345-32 Black forestay for Hobie® 17 Sport is constructed to factory specifications. Compare to Hobie Part# 52812001
    H-17 SPORT FORESTAY 5/32-BLACK WIRE
    Murrays Sports
    H-17 SPORT BRIDLE 5/32 BK​ Murrays PN 002-0315-22​ One bridle for the Hobie® 17 Sport (with jib) is constructed of black-coated, 5/32" 1x19 to factory specifications. Compare to Hobie 52500201.
    H-17 SPORT BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    Recently viewed