Hobie 17

Hobie 17

231 products
    231 products
    Harken 8mm Bow Shackle Murrays Part# 28-2117 The Harken 8mm Bow Shackle is a forged stainless steel shackle that is polished to a high luster and stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Their large interior opening allows plenty of articulation especially when attached to a round bail.
    HARKEN 8MM BOW SHACKLE
    Harken
    Out of Stock
    Hobie Halyard Twist Shackle Murrays Part# 50-60670000 Classic 3/16 inch stainless steel twist shackle from Hobie Cat. Hobie Part# 60670000
    HOBIE HALYARD TWIST SHACKLE
    Hobie
    Screw 1/4-20 x 1" THMS-P SS Murrays Part# 50-8030701 Hobie® factory replacement 1/4-20 x 1" stainless steel screw. Used on Hobie® pre-EZ-Loc rudder system, tendon tiller connector, rudder adjuster, Hobie 20 shroud anchor plate. Applications: H18/ Hobie 18 SX Rudder Adjuster Screw: 1 Compare to Hobie Part# 8030701
    SCREW STAINLESS STEEL 1/4-20x1"
    Hobie
    Out of Stock
    H17/18/20 Lower Rudder Casting Murrays Part# 50-50322001 Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.
    H-17/18/20 LOWER RUDDER CASTING
    Hobie
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    Out of Stock
    Nut Nylock 3/8-24 Murrays Part# 50-8050511 Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support. Hobie Part# 8050511
    NUT NYLOCK 3/8-24"
    Hobie
    H17/18 Mast Seal Plate Murrays Part# 50-61080000 Replacement mast seal plate for the Hobie 17 or Hobie 18.  Hobie Part# 61080000
    H-17/18 MAST SEAL PLATE
    Hobie
    Out of Stock
    H17/20/Tiger Mast Base Murrays Part# 50-50416011 Hobie® factory replacement black mast base for Hobie® 17, 20 or Tiger. Use two 6-6 rivets (#19-5032) for installation.
    H-17/20/TIGER MAST BASE
    Hobie
    Bolt 5/16-18 X 2" Murrays Part# 50-8040331 Replacement 5/16-18 x 2" bolt is used as a rudder bolt on Hobie® Pre-EZ Lock Rudder System. Hobie Part# 8040331
    BOLT 5/16-18 X 2"
    Misc
    Tracker Sheave Spacer Murrays Part# 007-1052 The standard replacement sheave spacer for the traveler on all Hobie® 14, 16 and newer 17's. Sold Individually Hobie Cat® Part# 11860000.
    TRACKER SHEAVE SPACER (EA)
    Hobie
    Tracker Hinge Upright Murrays Part# 007-1054 The standard replacement hinge upright for the tracker on all Hobie® 14, 16 and newer 17's. Fits: Hobie Getaway Main Traveler Car Hobie Cat® Part# 11840100
    TRACKER UPRIGHT HINGE
    Hobie
    TRACKER HINGE PIN
    Hobie
    Out of Stock
    Tracker Car Complete (Pre-1994) Murrays Part# 007-1050 This tracker car is the standard replacement part for all 1993 and earlier Hobie® 14, 16 and 17 main tracker traveler assemblies. Includes 2-3 rivets where required. Hobie Cat® factory item #105.
    TRACKER CAR COMPLETE (PRE'94)
    Hobie
    SAIL "HC" LOGO U-CUT PR BLACK
    Murrays Sports
    Harken Block Double Micro Murrays Part# 28-0226 Harken ball bearing micro double block with stainless side plates. Low-friction Micro blocks are compact and lightweight, making them ideal for sailboards, smaller dinghies, and lightly loaded control lines on boats of all sizes. Specifications: 1/4" maximum line capacity 350 lb. SWL 1200 lb. breaking strength 2" long Harken Part# 226 Hobie Part# H226S
    HARKEN BLOCK DOUBLE MICRO
    Harken
    H17 Shroud 5/32 Roller Swedge Murrays Part# 002-0305-12 This is our strongest Shroud for the Hobie 17.  If you have a Hobie 17 Sport or Hobie 17 Super kit or other setup that has a jib on the front, you need these. Heavy duty 5/32" single black shroud (sidestay) for Hobie 17 or Hobie 17 Sport is hydraulically swaged with a thimble and marine eye for a cleaner, stronger shroud.
    H-17 SHROUD 5/32" WIRE ROLLER SWAGED
    Murrays Sports
    Bolt Hex Head 1/4-20 X 4.5" (Stainless Steel) Murrays Part# 19-2227 Stainless steel mast bolt for Hobie® 20 is 1/4-20 x 4-1/2" long. Also fits Hobie® 17/20 and Nacra mast rotation arm (#25-3040)
    BOLT HEX HEAD 1/4-20 X 4.5" (SS)
    Misc
    HALYARD CLEAT (10 PACK)
    Hobie
    Out of Stock
    H17 Sport Spreader Pole Extender Murrays Part# 50-50511011 Hobie factory spreader pole extension for the Hobie 17 Sport
    H-17 SPORT SPREADER POLE EXTENDER
    Hobie
    Out of Stock
    H-17 SPORT SPREADER POLE ASSEMBLY
    Hobie
    Out of Stock
    H17 Sport Spreader Pole End Cap Murrays Part# 50-52009001 Spreader pole end cap for Hobie 17 sport sailboat.
    H-17 SPORT SPREADER POLE END CAP
    Hobie
    Out of Stock
    H17 Original Gooseneck Assembly Murrays Part# 50-50406201
    H-17 ORIGINAL GOOSENECK ASSEMBLY
    Hobie
    Out of Stock
    Boomlet HC17 SE to Sport Conversion Murrays part# 50-52722011 Make it much easier to move from one side of a Hobie® 17 to the other while tacking or jibing by removing the boom. Easily convert 1995 and newer Hobie® 17 SE race boats by adding the Hobie factory Boomlet. Hobie part# 52722011
    H-17SE TO SPORT BOOMLET CONVERSION
    Hobie
    Out of Stock
    Boom Assembly H17 Black Murrays Part# 50-50510000 Hobie® factory replacement black boom assembly for Hobie® 17.  Hobie part# 50510000
    H-17 BOOM ASSEMBLY-BLACK
    Hobie
    Out of Stock
    H-17 SPORT SPREADER POLE YOKE
    Hobie
    Out of Stock
    H-17 SPORT SPREADER POLE END CAST
    Hobie
    H17 Slide Slug Murrays Part# 50-50504101  Slide  Slug attaches to the sail and fits the boom track Big slug for smooth action Stainless steel bail makes sail attachment simple Molded in weld gives maximum strength
    H-17 SLIDE SLUG
    Hobie
    Ronstan S-Hook, 8mm (5/16") Murrays Part# 21-0049 The Ronstan 8mm S-Hook features a closed eye and long return leg to ensure a positive attachment and avoid accidental release. 316 Stainless Steel, 8mm diameter bar Ronstan Part# RF49
    RONSTAN S HOOK, 8MM (5/16")
    Ronstan
    H-17/20 POSITIVE MAST ROTATION
    Murrays Sports
    Hobie Halyard Ring with Loop Murrays Part# 50-61290021 Stainless steel halyward ring with loop, used on many Hobie Cat sailboats. Recommended for use with Hobie's twisted halyard shackle Hobie Part# 61290021
    HOBIE HALYARD RING WITH LOOP
    Hobie
    Out of Stock
    H-17 INSIDE WING TUBE
    Hobie
    Out of Stock
    H-17 REAR WING CASTING-BLACK
    Hobie
    Out of Stock
    H-17 WING CAP (EACH)
    Hobie
    Out of Stock
    WING CAST FRONT H17 BK
    Hobie
    Out of Stock
    H-17 TRAMPOLINE TRACK
    Hobie
    Out of Stock
    H17 Tiller Arm-Black Murrays Part# 50-50321111 Hobie® factory replacement black tiller arm tube for Hobie® 17.
    H-17 TILLER ARM-BLACK
    Hobie
    Out of Stock
    H17SE and Sport Mainsail (White) Murrays Part# 50-52991000 Hobie® factory white replacement main sail for the Hobie 17SE and Hobie 17 Sport.
    H-17SE/SPORT MAINSAIL (WHITE)
    Hobie
    Out of Stock
    H17 Sport Jib Sail (White) Murrays Part# 50-52992006 Hobie® factory white replacement jib sail for the Hobie 17 Sport
    H-17 SPORT JIB SAIL (WHITE)
    Hobie
    Out of Stock
    Getaway Mainsail (White) Murrays Part# 30-6005
    H-17 SPORT JIB SAIL (WHITE)
    Murrays Sports
    Out of Stock
    H17/18/20 Upper Rudder Casting Murrays Part# 50-50321001 Hobie® factory replacement upper left rudder casting for Hobie® 17, 18, 20 or Wave. Use four 6-8 rivets (#19-5033) for installation.
    H-17/18/20 UPPER RUDDER CASTING
    Hobie
    Recently viewed