Hobie 17

Hobie 17

231 products
    231 products
    MAST HINGE PIN NACRA/H17/20 Murrays Part# 56-F158 The mast base engages the mast ball and is secured by this headless clevis pin to allow the mast to be safely raised or lowered. Specs: 1/4" diameter x 2-3/8" overall length with a grip length of 1-15/16" Compatibility: Nacra Inter, F18, N15, F17, 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ, as well as Hobie 17, Tiger and 20. Split rings are sold separately. Compare to Hobie Cat part number 50406301.
    NACRA MAST HINGE PIN
    NACRA
    Rudder Pins H17/18 Stainless Steel Murrays Part# 001-4273 Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings. Cotter pins are included. Alternative to Hobie Cat® #60880011.  (* Pre EZ LOC Rudder c
    H-17/18 RUDDER PINS PR (SS)
    Murrays Sports
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    Daggerboard Carpet Murrays Part# 56-1082 ​Approximately 1-1/2″ wide carpet installs in daggerboard wells. Nacra factory item #1083. Sold by the foot.
    DAGGERBOARD CARPET
    Murrays Sports
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Hobie Shroud Anchor Bar Murrays Part# 50-50101701 This is the bar that the shroud anchor pins screws into to secure the shrouds on. Shroud anchor bar for Hobie Cat masts (replaces the nut used on older models). Use with the anchor pin to secure under the lip of the hull. Stainless steel Length: 3.5 inches Application: Hobie 14/16/17/18 sailboats Compare to Hobie Part# 50101701
    HOBIE SHROUD ANCHOR BAR
    Hobie
    Sealed Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    CHEATA MOTOR BRACKET
    Murrays Sports
    The Murrays Jib Snorkel will protect your roller furling jib from ultraviolet light and weather while on or off the boat.
    MURRAYS JIB SNORKEL
    Murrays Sports
    Hobie Tiller Extension Hinge Murrays Part# 50-10532010 Hobie® factory replacement tiller extension hinge for #50-20550001 Hobie® Fiberglass tiller extension. Also used on Nacra tillers. Hobie Part Number: 10532010
    HOBIE TILLER EXTENSION HINGE
    Hobie
    Hobie 1953 tiller connection kit - new style
    HOBIE TILLER CONNECTOR KIT
    Hobie
    Main Halyard Ring (Murrays) Murrays Part# 001-4216 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Hobie Aussie Ring (#07-3064). This item replaces discontinued Part
    MAIN HALYARD RING (MURRAYS)
    Murrays Sports
    Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033 Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231.
    RIVET CCP 6-8 (3/16 X 1/2)
    Misc
    Hobie 18 rudder plunger. Hobie Part number 50312201. Also use on the 17 as well as the older Wave and Getaway
    H-17/18/GETAWAY RUDDER CAST PLUNGER
    Hobie
    H14/16/18 Gooseneck Boom Pin Murrays Part# 50-10772010 Hobie® factory gooseneck boom pin for Hobie® 14, 16 or 18.
    H-14/16/18 GOOSENECK BOOM PIN
    Hobie
    Out of Stock
    Snap Shackle With Tack 1/4" Murrays Part# 22-4501 Swiveling tack shackle with 1/4" clevis pin. Use on hexaratchets on Hobie® 18, Nacra or Prindle. To connect the swivel shackle to an item that requires a 3/16" clevis pin, you will need a 3/16" clevis pin with 7/8" shaft. Also convenient for the jib tack connection on Nacras and Inters.
    SNAP SHACKLE WITH TACK 1/4"
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    Quick Release Pin Deluxe  3/16 X 3/4" Murrays Part# 18-3M075 This Quick Release Pin features 2 locking balls for a extra secure grip, and a push button deluxe dished head with a hole for lanyard attachment. The Deluxe pin is quick and easy to remove and install, and makes getting on and off the water quicker and easier.
    QUICK RELEASE PIN DELUXE 3/16 X 3/4"
    Misc
    clevis pins with split rings for the standing rig and mast stepping systems of Hobie 17, Hobie 20, or Nacra. Kit includes 18 pieces: mast hinge pin, clevis pin assortment, and split ring assortment.  Compare to Hobie Cat #30317.
    H-17/20/NACRA PINS AND RINGS KIT
    Murrays Sports
    Rudder Casting Lock Spring Murray Part# 50-10430000 Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18. Compare to HC part number 10430000 H14, H16, H17, H18, H20
    HOBIE RUDDER SPRING
    Hobie
    Rudder Cam Screws H17, H18, H20, Older Wave and Getaway Murrays Part# 001-3551 The Murrays Rudder Cam Pins are a pair of sister screws for use on the Hobie 17, 18, 20, 21, as well as the older Hobie Wave and Getaway rudder cams. These pins are an upgrade form the original stock hollow flare rivet that came on the Hobie. The Sister Screws are much easier to install and remove, and they are reusable. Compare to Hobie Cat® #5203 and #50312301. Sold in pairs
    H-17/18/20/OLDER WAVE AND GETAWAY RUDDER CAM PINS
    Murrays Sports
    Rivet CCP 6-10 (3/16 X 5/8) Murrays Part# 19-5034 Stainless steel 3/16" x 5/8" rounded pan head rivet. Compare to Hobie Cat® #8010121. Halyard mast cleat rivet
    RIVET CCP 6-10 (3/16 X 5/8)
    Misc
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
    TELO-CAT REPLACEMENT VANE
    Davis
    Replace a 3/16" bow shackle with this quick-release version to add convenience. Can be used on 2-1/4" blocks. Compare to Hobie Cat® #3062.
    QUICK RELEASE 3/16" BOW SHACKLE
    Murrays Sports
    Rivet CCC 6-6 (3/16 X 3/8) Countersunk Murrays Part# 19-5024 Countersunk stainless steel 3/16" x 3/8" rivet for traveler tracks, etc. Compare to Hobie Part # 8010201. This rivets is what Hobie recommends for both the main traveler tack and the jib traveler track. We also recommend using an 1/8" stop sleeve, part number 002-1041, as a spacer to help you apply pressure on the rivet inside the track, as the track is too narrow for most rivet guns to get far enough inside to apply pressure to the rivet.
    RIVET CCC 6-6 CSK
    Misc
    Screw Delrin 3/8-16 X .75" Murrays Part# 50-8032001 Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System. Hobie Part# 8032001
    SCREW DELRIN 3/8-16 X .75"
    Hobie
    Harken Swivel with Carbo Cam Bullseye Murrays Part# 25-3010 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads and flat head screws separately to mount to your front crossbar.
    HEAVY DUTY SWIVEL WITH CARBO CAM & BULLSEYE
    Murrays Sports
    NUT SQUARE 10-32 Murrays Part# 50-8051301 Hobie® factory replacement stainless steel 10-32 square nut can be used when mounting downhaul/halyard cleat on Hobie® 14 or 16. Also can be used for mounting H17 trampoline eye straps. Use 19-2910 screw. Hobie Part# 8051301
    NUT SQUARE 10-32
    Hobie
    Out of Stock
    Swivel Mount Base with Fasteners Murrays Part# 007-1162 The offset base pad kit fits Hobie® and Prindle elliptical crossbars. Includes injection-molded plastic base and fasteners. Replacement fasteners are also available (requires 3 self-tapping screws #19-1620, 1 machine screw #19-1516, and 1 nut #19-2016). Hobie Cat® Part# 1162
    PRINDLE SWIVEL MOUNT BASE WITH FASTENERS
    Hobie
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras. Applications: Hobie 18 / H18: Bow Tang Nut Qty: 6 Rudder Adjustment: 1 Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    Harken 29mm Bullet Sheave Murrays Part# 28-0160 Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
    HARKEN 29MM BULLET SHEAVE
    Harken
    H14/16/17/18 Gudgeon Lower Murrays Part# 25-3352 The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set . Replacement for Hobie Part# 50101401
    H-14/16/17/18 LOWER GUDGEON
    Murrays Sports
    Ronstan Toggle Pin with Lanyard 1/4 X 5/8" Murrays Part# 21-1155L ​Stainless steel 1/4" diameter toggle pin replaces 5/8" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 5/8"
    Ronstan
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    PLASTIC CONTOURED SPACER
    Murrays Sports
    ELONGATED TRAPEZE RING Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    Halyard 5"X 9" Zip Pouch-Assorted Colors Murrays Part# 31-1400 The Murrays 5" x 9" zippered halyard pouch is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the tramp lacing. The off-center zipper is designed for easy stuffing of your boat's halyard. The pouch is also handy for storing replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 7
    HALYARD 5"X9" ZIP POUCH- ASSORTED COLORS
    Murrays Sports
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    Out of Stock
    Decal Mast Caution Orange Murrays Part# 13440010 Hobie® factory decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat. Hobie Part# 13440010
    ORANGE MAST CAUTION DECAL
    Hobie
    Recently viewed