Hobie 17

Hobie 17

246 products
    246 products
    H14/16/17/18 Gudgeon Lower Murrays Part# 25-3352 The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set . Replacement for Hobie Part# 50101401
    Upper rudder gudgeon for the Hobie 14 and 16. This updated, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    H-14/16/17/18 LOWER GUDGEON
    Murrays Sports
    Clamcleat (Aluminum) Murrays Part# 27-0702 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".  2 5/8" hole spacing. This cleat is a substitution for Hobie Part# 61070000
    CLAMCLEAT (ALUMINUM)
    Clamcleat
    Clevis Pin 1/4 X 1-1/8 Murrays Part# 22-9803 Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole). Compare to Hobie Part 8020420 and 8020410
    CLEVIS PIN 1/4 X 1-1/8"
    Misc
    Out of Stock
    Rudder Blade EZ Lock With Indents Murrays Part# 50-20491000 Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems
    RUDDER BLADE EZ LOCK WITH INDENTS
    Hobie
    Murrays 57mm Carbo 6:1 Mainsheet System Murrays Part# 28-61 The Murrays Harken 57mm Carbo 6:1 Mainsheet System is an improved low profile mainsheet system for Hobie 16.  By attaching a fairlead to the back side of the cleat mount the Murrays system does not need a becket on the lower block which makes the system more compact and gives sailors the ability to sheet in farther and or rake the mast back farther before having the mainsheet bottom out and go block to block.
    HARKEN 57MM CARBO 6:1 MAINSHEET SYSTEM
    Harken
    Hobie Aussie Halyard Ring Murrays Part# 007-3064 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216). Hobie® Part# 3064
    HOBIE AUSSIE HALYARD RING
    Hobie
    ELONGATED TRAPEZE RING Large trapeze ring made of solid 316 stainless steel for strength and longevity. AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring.  Hobie part number 2002, compare to Hobie part number 2001 Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    Rudder Pins H17, H18, Wave, Getaway (Aluminum) Murrays Part# 001-4274 Aluminum rudder pins for the Hobie 17, 18, Wave and Getaway.  Aluminum 3/8″ x 9-1/4″ rudder pins, cotter pins are included.  Sold in pairs Compare to Hobie Cat® #60880001
    H-17/18/WAVE AND GETAWAY ALUMINUM RUDDER PINS
    Murrays Sports
    H14/16 Upper Gudgeon Murrays Part# 25-3351 This latest, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    Upper rudder gudgeon for the Hobie 14 and 16. This updated, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    H-14/16 UPPER GUDGEON
    Murrays Sports
    Harken 29mm Bullet Sheave Murrays Part# 28-0160 Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
    HARKEN 29MM BULLET SHEAVE
    Harken
    Mast Rotation Control Arm Murrays Part# 25-3040 Stainless mast rotation control arm is strong and smooth! Arm #25-3040 with 1/4″ hole is for all Hobies except for the Hobie® 17, Prindles and Nacras; Arm #25-3041 with 5/16″ hole is for Nacras, Prindles and the Hobie® 17. H17 uses #19-2235 bolt Hobie Part# 61210001
    MAST ROTATION CONTROL ARM
    Murrays Sports
    Halyard 5"X 9" Zip Pouch-Assorted Colors Murrays Part# 31-1400 The Murrays 5" x 9" zippered halyard pouch is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the tramp lacing. The off-center zipper is designed for easy stuffing of your boat's halyard. The pouch is also handy for storing replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 7
    HALYARD 5"X9" ZIP POUCH- ASSORTED COLORS
    Murrays Sports
    HOBIE ROLLER FURLER DRUM ASSEMBLY
    Hobie
    Out of Stock
    Swivel Mount Base with Fasteners Murrays Part# 007-1162 The offset base pad kit fits Hobie® and Prindle elliptical crossbars. Includes injection-molded plastic base and fasteners. Replacement fasteners are also available (requires 3 self-tapping screws #19-1620, 1 machine screw #19-1516, and 1 nut #19-2016). Hobie Cat® Part# 1162
    PRINDLE SWIVEL MOUNT BASE WITH FASTENERS
    Hobie
    Jib Clew Plate 3-Hole Murrays Part# 50-62270000 Hobie® factory replacement 3-hole jib clew plate (pair) with rivets. Hobie 18 main sail clew plate Hobie Part# 62270000
    JIB CLEW PLATE 3-HOLE
    Hobie
    Hobie Gooseneck Hinge Vertex Murrays Part# 50-50772031 Hobie® factory replacement gooseneck vertex for all Hobie® Cats. Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    Tracker Traveler Sheave Replacement Kit Murrays Part# 007-1059 The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's.  Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave. Fits Hobie Getaway Main Traveler Car. Hobie® Part# 11880000
    TRACKER TRAVELER SHEAVE REPLACEMENT KIT
    Hobie
    Small Fairlead: 1-1/4 X 1/2 Murrays Part# 23-0921 Stainless steel fairlead measurements: A = 1-1/4" (31.4mm) between holes center-to-center B = 1/2" (12.7mm) height C = 3/16" (5mm) hole diameter
    RONSTAN SMALL FAIRLEAD: 1-1/4 X 1/2
    Ronstan
    HOBIE EPO3 RUDDER BLADE
    Hobie
    Tracker: Sheave The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's. Hobie® factory item #11880000. Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave. Fits Hobie Getaway Main Traveler Car.
    TRACKER TRAVELER SHEAVE
    Hobie
    H14/16/17/18 Line Catcher-Black Murrays Part# 30-3530 The Hobie Trampoline Line Catcher is a strip of mesh trampoline that fits in between your center trampoline lacing to prevent lines and other items from falling through the lacing. Works on all 3 piece Hobie 14, 16 and 18 trampolines.
    H-14/16/17/18 LINE CATCHER-BLACK
    Murrays Sports
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires. Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity. Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports
    Murrays Part# 50-10432000 Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up. Used on Hobie 18 Rudder Systems from late 80s through now. Used on Hobie 16 Rudder Systems after 1983 Used on Hobie Getaway Rudder Systems pre- EZ Loc Hobie part number 10432000
    HOBIE RUDDER SPRING-LONG
    Hobie
    Out of Stock
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    Out of Stock
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-60400011M Murrays Tiller Crossbar Adjustable Cap Kit installs in the end of the Hobie tiller crossbar and allows you to adjust the width of the crossbar which controls the angel of the rudders. Hobie discontinued this part and this is a Murrays Replacement part that we have made here in California. Applications: H14, H16, H17, H18, Hobie 18 SX tiller x-bar Tiller Crossbar Adjuster: 1
    HOBIE TILLER CROSSBAR ADJUSTABLE END CAP - 60400011
    Murrays Sports
    Out of Stock
    Hull Cradle: Bow Murrays Part# 13-7030
    HULL CRADLE: BOW
    Murrays Sports
    Rear Mast Support with "V" Murrays Part# 13-3002
    REAR MAST SUPPORT WITH "V"
    Murrays Sports
    Out of Stock
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    Out of Stock
    H16/17/18 Tiller Crossbar-Post-1995 Murrays Part# 50-20521001 The Tiller Crossbar H16, H17, H18 Post-1995- is a Hobie® factory replacement tiller crossbar for 1995 and newer Hobie® 16, 17 or 18. The Post 95 version comes with the new style quick connect tiller connection system.
    H-16/17/18 TILLER CROSSBAR-POST 1995
    Hobie
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    NYLON 1/2" BALL
    Murrays Sports
    Hobie Main Sail Headboard w/ rivets Replacement Hobie factory Hobie Main Sail Headboard w/ rivets. Hobie part #68330011
    HOBIE ALUMINUM HEADBOARD WITH RIVETS
    Hobie
    Out of Stock
    Black Mast Caution Decal Murrays Part# 50-13440000 The Decal Mast Caution Black Hobie® factory caution decal attaches to mast as a reminder to watch for overhead power lines when sailing and/or launching your boat.
    BLACK MAST CAUTION DECAL
    Hobie
    Out of Stock
    Batten Cap Main Luff (EA) Murrays Part# 50-11322011 Main luff batten cap for Hobie Cats are sold individually. Order batten tie separately; 18" of line per batten cap is standard. Hobie® factory replacement part.
    MAIN LUFF BATTEN CAP (EA)
    Hobie
    Trap Shock Cord H17 Murrays Part# 001-3520 A trapeze shock cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. One hook connects to either the thimble on the trapeze wire or the adjustment line, then runs under the tramp and connects to the other side in the same location. Shock cord comes with one plastic carbine hook installed; the other hook is installed after lacing shock cord through trampoline grommets. Cord is 1/4" diameter by 12' Sold Each
    H-17 TRAP SHOCK CORD
    Murrays Sports
    3-Hole Pad Kit Murrays Part# 001-0110 This base kit is for Harken®, Hobie® or Murray 360 cleats without swivel base adapters. Kit includes one 3-hole base, one swivel base adapter (#25-3001), plus three #10 FHSMS (#19-1626). Ronstan swivel 360 cleats include swivel base adapters, so this kit is not necessary. Fits Hobie® or Prindle elliptical crossbar.
    3-HOLE PAD KIT
    Murrays Sports
    HEAVY DUTY SWIVEL WITH ALUMINUM CAM & BULLSEYE
    Murrays Sports
    Ronstan Toggle Pin 15.9mm Long 6.4mm Diameter Murrays Part# 21-1155 Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1155L
    RONSTAN TOGGLE PIN 1/4 x 5/8"
    Ronstan
    Harken 8mm Bow Shackle Murrays Part# 28-2117 The Harken 8mm Bow Shackle is a forged stainless steel shackle that is polished to a high luster and stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Their large interior opening allows plenty of articulation especially when attached to a round bail.
    HARKEN 8MM BOW SHACKLE
    Harken
    Recently viewed