All Hobie 16 parts: Sails, trampolines, jibs, lines, rigging, rudder parts.

Hobie 16 Parts - All

434 products

    Murrays Sports is a one stop shop for all Hobie 16 replacement parts, rigging, sails, hardware, trampolines, rudder components, and accessories. Find quality parts to maintain, repair, and upgrade your Hobie 16 for peak performance on the water.

    Hobie 16 Parts and Accessories

    Keep your Hobie 16 sailing at its best with high-quality replacement parts and accessories. Whether you're repairing worn equipment, upgrading performance components, or performing routine maintenance, you'll find the parts you need to keep your catamaran in top condition.

    Browse a complete selection of Hobie 16 parts, including:

    • Standing and running rigging - shrouds, halyards, bridles, forestays and trapeze wires.
    • Rudder and tiller components
    • Trampolines and trampoline accessories
    • Mast and boom hardware
    • Sail battens and sail accessories
    • Blocks, cleats, and sheeting lines and compete control systems
    • Hull fittings and replacement hardware
    • Beach wheels and launching accessories

    Murrays inventory is designed to help Hobie sailors extend the life of their boats while maximizing safety, speed, and performance. Whether you're a recreational sailor, racer, or sailing school, Murrays offers reliable Hobie 16 replacement parts for every maintenance and upgrade project.

    Use the hyperlinked Hobie 16 illustrated parts list to help you find the parts that you need.

    Or shop by category: Sails, boom parts, hull parts, trampolines, upgrades and accessories.

    434 products
    EASY RIGG TOOL BLUE
    Murrays Sports
    EASY RIGG TOOL GREEN
    Murrays Sports
    EASY RIGG TOOL
    Easy-Rigg
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    Harken 29mm Bullet Sheave Murrays Part# 28-0160 Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
    HARKEN 29MM BULLET SHEAVE
    Harken
    Ronstan Plastic Drain Plug with Chrome Brass Housing, 15/16" Hole Murrays Part# 21-0737 This lightweight and inexpensive plug features a molded recess in the base that traps sealant (sold separately) in place, providing a more watertight seal. Nylon plug is UV-stabilized. Retaining legs keep drain plug from falling out of hole when unscrewed. Includes chromed brass housing (body) and gasket.
    RONSTAN PLASTIC DRAIN PLUG WITH CHROME BRASS HOUSING, 15/16" HOLE
    Ronstan
    Mast Hinge H-16 (Only) Murrays Part# 25-3360 Heavy duty mast base hinge for Hobie® 16 only (does not fit Hobie 14). Clevis pins are sold separately. NOTE: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. The way to tell is if your mast step has a horizontal mast base then it is old style, new style has a slant toward the stern.
    H-16 (ONLY) MAST HINGE
    Murrays Sports
    Tren Tec Hobie 16 main sail luff batten caps prevent batten splitting and align batten to the angle of the sail. Glue cap to the forward end of the batten. Increases the life of the sail Prevents battens ripping the sail pockets Prevents battens from splitting Aligns battens to the angle of the sail Sold in packages of 8 Hobie Part# 1562
    Tren Tec Hobie 16 main sail luff batten caps prevent batten splitting and align batten to the angle of the sail. Glue cap to the forward end of the batten. Increases the life of the sail Prevents battens ripping the sail pockets Prevents battens from splitting Aligns battens to the angle of the sail Sold in packages of 8 Hobie Part# 1562
    H-16 ANGLED LUFF CAPS (8)
    Tren-Tec
    TRAMP CLAMP (10) Minimize chafing at trampoline stress points and reduce the possibility of the trampoline pulling out of the aluminum extrusion. Clamps slide into the aluminum extrusion track. 10 pieces, 1.5" long. By Tren Tec.™ Hobie Cat® uses #2066 for this item
    TRAMP CLAMP (10)
    Tren-Tec
    Batten Cap Hobie Main Leech Murrays Part# 50-11323000 Hobie® factory replacement part number 11323000. Hobie batten cap are sold individually. Order batten tie separately; 18" of 1/8" line per batten cap is standard. Sold individually
    HOBIE MAIN LEECH BATTEN CAP
    Hobie
    Sidewinder Becket Murrays Part# 005-0701 Add on becket for classic Harken Mainsheet systems. The sidewinder becket is for older Harken 2.25" or 3.00" triple blocks. It enables extra purchase ratio without sacrificing low profile block stacking. Some drilling is required for installation.
    SIDEWINDER BECKET
    Murrays Sports
    Ronstan bow shackle measurements
    RONSTAN 1/4" BOW SHACKLE
    Ronstan
    Halyard Cleat Kit with Rivets Murrays Part# 001-1019 The Murrays Halyard Cleat Kit with Rivets pulls the halyard out of the way to keep the battens from hanging up on the halyard of an H16. The kit includes the halyard cleat and sealed stainless rivets. Center-to-center hole spacing is 31mm. *Photo is out of date and kit no longer comes with casings as the rivets that are included come sealed. Compare to Hobie Cat Part 10730000
    HALYARD CLEAT KIT WITH RIVETS
    Murrays Sports
    Downhaul Cleat with Screws Murrays Part# 001-1020 The Downhaul Cleat Kit is for mounting in mast track (such as Hobie 16) and includes cleat, screws and channel inserts. Center-to-center hole spacing is 1-1/8". We have another kit for the halyard cleats on the side of the mast that includes rivets.
    DOWNHAUL CLEAT WITH SCREWS
    Murrays Sports
    Out of Stock
    Hobie Mast Step Pin 3/16 x 2 1/8" - 8020080 Replacement Hobie 14 and Hobie 16 mast step pin. Measures 3/16" x 2-1/8" Used with the Hobie mast step link kit 21380001 for raising and lowering the mast on a Hobie 14 and 16. Also called Hobie 16 mast hinge pin, mast step hinge pin, mast base pin, mast step link pin... Hobie part number 8020080
    HOBIE MAST STEP PIN 3/16 X 2 1/8 - 8020080
    Hobie
    Batten Cap Jib Leech H16 Murrays Part# 50-2133000 Hobie® factory jib leech batten cap for Hobie® 16. For batten tie, use 18" of 1/8" Dacron® solid braid #39-0221. These are also used on the top two battens of a Hobie Wave and the top batten of a Hobie 18 Mainsail. Sold individually
    HOBIE JIB BATTEN LEECH CAP (EA)
    Hobie
    Comp-Tip Mast Head Sheave for H16 Wave Murrays Part# 50-20614210 CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer. The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole. The larger sheave for the obsolete mast head for all-aluminum mast is no longer available. Hobie Part number 20614210
    H-16/WAVE COMP-TIP MAST HEAD SHEAVE
    Hobie
    Out of Stock
    Mast Float Attachment Kit: H14/16 Murrays Part# 007-30116 This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here.
    H-14/16 MAST FLOAT ATTACHMENT KIT
    Hobie
    Out of Stock
    Hobie Boom Blocker Hanger  Murrays Part# 50-10760000 Hobie factory boom block hanger for the Hobie 14, 16, 17 and 18. Hole spacing is 1-1/8".  Use four 6-4 rivets (#19-5031) for installation.
    HOBIE BOOM BLOCKER HANGER
    Hobie
    Hobie 16 gooseneck bearing kit. Tren Tec. Murrays Marine. Hobie Cat part number #1511
    Murrays Gooseneck Bearing Kit Hobie 14 & 16 instructions. Hobie Cat part number #1511
    H-14/16 GOOSENECK BEARING KIT
    Tren-Tec
    Hobie 16 mast bearings. Teflon mast chips, Hobie part number 11110005
    Hobie 16 Mast bearing kit comes with 3 Teflon mast pivot bearings for the Hobie 14, and 16 as well as the older Waves and getaways. Mast bearings sit between the mast step casting and the mast base casting to reduce friction and allow for easier mast rotation and prevent metal-to-metal contact. The mast chips will form to mast base with first use. Mast bearing should be replaced about once a year, depending on use. Compare to Hobie part# 11110005
    H-14/16 MAST BEARING (3-PKG)
    Murrays Sports
    3-Hole Pad Kit Murrays Part# 001-0110 This base kit is for Harken®, Hobie® or Murray 360 cleats without swivel base adapters. Kit includes one 3-hole base, one swivel base adapter (#25-3001), plus three #10 FHSMS (#19-1626). Ronstan swivel 360 cleats include swivel base adapters, so this kit is not necessary. Fits Hobie® or Prindle elliptical crossbar.
    3-HOLE PAD KIT
    Murrays Sports
    HOBIE TILLER EXT BUSHING Murrays Part# 50-40300001 This is the bushing that goes into the tiller crossbar of most Hobiecat Sailboats. This part was discontinued or otherwise no longer available as a separate part. Compare to Hobie part# 40600001
    HOBIE TILLER BUSHING EXTENDER
    Hobie
    Murrays Part# 50-10432000 Hobie® factory 2½" spring for Hobie® 16 lower rudder casting. This spring is longer and stiffer than original equipment (#50-10430000), providing additional tension if you are having trouble with rudder kick up. Used on Hobie 18 Rudder Systems from late 80s through now. Used on Hobie 16 Rudder Systems after 1983 Used on Hobie Getaway Rudder Systems pre- EZ Loc Hobie part number 10432000
    HOBIE RUDDER SPRING-LONG
    Hobie
    Hobie Main Traveler Track Access Plate Kit Murrays Part# 50-11810011 This kit has been discontinued by Hobie, but the plates are still available, so Murrays is producing the kits with the Hobie plates.
    HOBIE MAIN TRAVELER TRACK ACCESS PLATE KIT
    Hobie
    Bolt Hex Head 1/2-13 X 3.75 (Stainless Steel) Murrays Part# 19-2240 Stainless steel hex head bolt for older Hobie® 16 pylon. Compare to Hobie® Part#50-8040731
    BOLT HEX HEAD 1/2-13 X 3.75" (SS)
    Misc
    Out of Stock
    H14/16 Clear Anodized Aft Boom End Cap Murrays Part# 10741031 Replacement rear boom end cap for Hobie® 14 or 16 is Hobie® factory item #10741031. Use two 6-6 rivets (#19-5032) for installation. Hobie Part# 10741031
    H-14/16 CLEAR ANODIZED AFT BOOM END CAP
    Hobie
    Save $6.99
    Kisme Kleet (4) Murrays Part# 005-1010
    KISME KLEET (4)
    Misc
    Out of Stock
    Sailors All Purpose Tool (SSI) Murrays Part# 001-0005 The sailor's all-purpose stainless tool is a wrench that fits nuts for 1/4" and 5/16" bolts and it's also a cam remover, screwdriver, bottle opener and shackle tool. It also helps with shackle pins and drain plugs. Hobie Cat® Part# 83103
    SAILORS ALL PURPOSE TOOL (SSI)
    Hobie
    Out of Stock
    H16 Assembly Manual Murrays Part# 50-23450000 Hobie Cat® factory manual for the Hobie 16®. The manual is also available for free download at the Hobie Cat® Web site.
    H-16 ASSEMBLY MANUAL
    Hobie
    Out of Stock
    Swivel Cam Cleat Pad Murrays Part# 50-11900010 Replacement base pad for your H16 jib car cleats or Mainsheet on most Hobie Cat sailboats. Hobie Part# 11900010
    SWIVEL CAM CLEAT PAD
    Hobie
    Hobie 16 Rear Traveler Access Plate Murrays Part# 50-11810000 Hobie part number 11810000
    Hobie 16 Rear Traveler Access Plate Murrays Part# 50-11810000 Hobie part number 11810000
    H-16 REAR TRAVELER ACCESS PLATE
    Hobie
    HOBIE 16 JIB TRAVELER CAR SHEAVE Replacement Hobie 16 Jib traveler car sheave. Hobie part number 20132030
    H16 JIB TRAVELER CAR SHEAVE
    Hobie
    MURRAYS H-16 HALYARD GRIP KIT The Murrays H16 Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking.  Mostly used on the Hobie 16. Compare to Hobie part number 114
    MURRAYS H-16 HALYARD GRIP KIT
    Murrays Sports
    Out of Stock
    HOBIE HALYARD GRIP KIT The Hobie Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking. Mostly used on the Hobie 16. Hobie part number 114
    HOBIE HALYARD GRIP KIT
    Hobie
    Ronstan Series 19 C-Track End Cap Murrays Part# 21-0366 These are End Stops for the new C-Track by Ronstan. Similar to the stainless tracks used on H18 and H16 in the past. Track end, plastic Best replacement for End stop for 5/8" jib track as on Hobie® 16 or Hobie® 18. The end stop can be fastened with #19-1620 screw or #19-5021 6-4 countersunk rivet. Compare to Hobie Cat part #20260000.
    RONSTAN JIB TRACK END CAP
    Ronstan
    H14/16 Gooseneck Shackle Murrays Part# 50-10772020 Hobie factory replacement gooseneck shackle for Hobie 14 and Hobie 16. Uses a 3/16 x 7/8" clevis pin to connect to the main sail tack. Quick release upgrade option is the 3/16 x 3/4" Quick Release Pin, part #18-3M075L Some newer boats and racers replace the downhaul ring with a second Gooseneck Shackle.
    H-14/16 GOOSENECK SHACKLE
    Hobie
    Batten Cap Main Luff (EA) Murrays Part# 50-11322011 Main luff batten cap for Hobie Cats are sold individually. Order batten tie separately; 18" of line per batten cap is standard. Hobie® factory replacement part.
    MAIN LUFF BATTEN CAP (EA)
    Hobie
    Out of Stock
    H16 Insignia Decal Murrays Part# 50-22330000 Hobie® 16 sail class insignia decal is a Hobie® factory replacement item.
    H-16 INSIGNIA DECAL
    Hobie
    Hobie 20-style factory tiller connector post. Part of the Hobie 1953 tiller connection system. Hobie part number 40530000 and 40530001
    Hobie 1953 tiller connection kit - new style
    H-20 TILLER CONNECTOR POST
    Hobie
    Recently viewed