All Hobie 16 parts: Sails, trampolines, jibs, lines, rigging, rudder parts.

Hobie 16 Parts - All

434 products

    Murrays Sports is a one stop shop for all Hobie 16 replacement parts, rigging, sails, hardware, trampolines, rudder components, and accessories. Find quality parts to maintain, repair, and upgrade your Hobie 16 for peak performance on the water.

    Hobie 16 Parts and Accessories

    Keep your Hobie 16 sailing at its best with high-quality replacement parts and accessories. Whether you're repairing worn equipment, upgrading performance components, or performing routine maintenance, you'll find the parts you need to keep your catamaran in top condition.

    Browse a complete selection of Hobie 16 parts, including:

    • Standing and running rigging - shrouds, halyards, bridles, forestays and trapeze wires.
    • Rudder and tiller components
    • Trampolines and trampoline accessories
    • Mast and boom hardware
    • Sail battens and sail accessories
    • Blocks, cleats, and sheeting lines and compete control systems
    • Hull fittings and replacement hardware
    • Beach wheels and launching accessories

    Murrays inventory is designed to help Hobie sailors extend the life of their boats while maximizing safety, speed, and performance. Whether you're a recreational sailor, racer, or sailing school, Murrays offers reliable Hobie 16 replacement parts for every maintenance and upgrade project.

    Use the hyperlinked Hobie 16 illustrated parts list to help you find the parts that you need.

    Or shop by category: Sails, boom parts, hull parts, trampolines, upgrades and accessories.

    434 products
    Out of Stock
    H16 Rudder Casting Cam Pin 1/4"

Murrays Part# 50-10470000



Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    $9.99
    Rudder Casting Lock Spring
Murray Part# 50-10430000
Hobie factory replacement 2-1/8" lock spring for rudder casting. Replace rudder springs with this original spring supplied on Hobie® 14, 16, (pre 1983) 17 and 18.
Compare to HC part number 10430000
H14, H16, H17, H18, H20
    HOBIE RUDDER SPRING
    Hobie
    $9.99
    RUDDER CASTING DELRIN SCREW - rudder locking adjustment screw - 60450000
    HOBIE DELRIN RUDDER SCREW - 60450000
    Hobie
    $9.99
    H18 Mast Head/Base Sheave

Murrays Part# 50-60620000

Factory replacement sheave for Hobie 18 mast head/base and outhaul assembly.

Specs: 1" Diameter x 3/8" wide and 1/4" hole.

Also used as traveler control line turning sheave on 2005 and newer Hobie 16 sailboats.

Applications:

Hobie 18 - Mast head halyard sheave ; mast base halyard sheave ; outhaul car sheaves.
Hobie 16 - Jib Traveler line sheave. (in the H16 Race Corner Castings) use 50-8011251 Rivet
    H-18 MAST HEAD/BASE SHEAVE
    Hobie
    $9.99
    Batten Cap Leech Adjustable H16 Jib
Murrays Part# 012-3004
No more knots at the trailing edge. Adjust Hobie® 16 jib sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual cap.
Sold in packages of 4
    ADJUSTABLE JIB BATTEN CAPS (4)
    Tren-Tec
    $9.08
    Hobie Cat #80550005 Main sail batten pocket protector kit.  Hobie, Nacra, Prindle.
    MAIN SAIL POCKET PROTECTOR KIT
    Murrays Sports
    $9.00
    H14/16 Rudder Return Hand Shock Cord

Murrays Part# 001-2240

Two 32" shock cords with balls keep your Hobie® 14 or 16 rudders down when the cams don't! Order Kisme Kleets #05-1010 separately, if needed.
    H-14/16 RUDDER RETURN HAND SHOCK CORD
    Murrays Sports
    $8.50
    Mast Cleat
Murrays Part# 011-6481
The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000.
31mm Center to Center.
    MAST CLEAT
    Murrays Sports
    $8.50
    Ronstan Bullseye with Ferrule

Murrays Part# 25-0323



Stainless ferrule eliminates with nylon housing, the stainless center coating prevents grooving and wear from uses. Allows for up to 7/16" line capacity.

Mounting: Two screws ordered separately (#10-32x1") part number 19-2915.
    RONSTAN BULLSEYE FAIRLEAD WITH FERRULE
    Ronstan
    $8.20
    Ronstan Stainless Steel D Shackle, 3/16" Pin, Slotted Head

Murrays Part# 21-0616


Ronstan stainless D shackle has 3/16" diameter pin. This shackle is a substitute for Hobie® item #11220000, #SP0051 and #SP0052.
    RONSTAN 3/16 D SHACKLE
    Ronstan
    $8.00
    Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head

Murrays Part# 21-0634



Solid stainless steel bow shackle has 3/16" diameter pin. 

UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
    Ronstan bow shackle measurements
    RONSTAN 3/16" BOW SHACKLE
    Ronstan
    $8.00
    Quick-Release Pin Detent 1/4 X 1-1/2
Murrays Part# 18-4D150
The Quick-Release Pin Detent 1/4 X 1-1/2 is an economical, quick connection for Hobie 16 mast step pin. A spring-loaded ball exerts sufficient pressure to help avoid accidental release. Measurements are 1/4″ diameter x 1-1/2″ maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE DETENT PIN 1/4 X 1-1/2"
    Misc
    $7.50
    Ronstan Clevis Pin Retaining Clip

Murrays Part# 21-0413

The Ronstan Spring Clip is a stainless spring clip for quick rudder pin removal or Hobie 14, 16, 17, 18, 20, Wave and Getaway models. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie, Nacra and Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape.

Ronstan Part# RF413
    RONSTAN CLEVIS PIN RETAINING CLIP
    Ronstan
    $7.45
    Rudder Stiffening Kit

Murrays Part# 001-2053

The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.
    RUDDER STIFFENING KIT
    Murrays Sports
    $7.00
    Rudder Casting Plunger H14/16
Murrays Part# 50-10440000
Hobie® factory replacement rudder casting plunger for Hobie® 14 or 16.
    H-14/16 RUDDER CASTING PLUNGER
    Hobie
    $6.99
    RONSTAN 4" HORN CLEAT
    Ronstan
    $6.93
    H-16 FOAM MAST PLUG
    Hobie
    $6.39
    Batten Caps Luff H16 Jib (Pack of 4)
Hobie Part# 012-3006
No more battens poking through next to the mast. This Tren Tec item includes four Hobie® 16 jib luff batten caps to prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Cat® uses #1566 for this item
    H-16 JIB BATTEN LUFF CAPS (4)
    Tren-Tec
    $6.00
    3-Hole Adapter Pad

Murrays Part# 001-0109



Our 3-hole adapter pad fits a Hobie® or Prindle elliptical crossbar. Polyurethane bases provide flat mounting surfaces for mast rotation control cleats, barberhauler cleats, or Hobie® 16 jib trim cleats. Use to mount small Ronstan C-Cleat (#21-5000) or Ronstan Small or Large Swivel 360 Cleats (#21-0067 or #21-0058). Each base can be port or starboard, depending on how cleats are installed.
    3-HOLE ADAPTER PAD
    Murrays Sports
    $6.00
    Drain Plug with Plastic Base

Murrays Part# 001-0051

This lightweight and inexpensive drain plug features a molded recess in the molded nylon base that traps sealant (sold separately) in place, providing a more watertight seal. Gasket included.
    DRAIN PLUG WITH PLASTIC BASE
    Sea Dog
    $6.00
    Sail Pocket Protector Kit Jib

Murrays Part# 001-1002

The Jib Sail Pocket Protector Kit includes one pair of tough nylon protectors with indentations for included rivets that are set with a hammer.
    JIB SAIL POCKET PROTECTOR KIT
    Murrays Sports
    $6.00
    EYE STRAP KIT - 2072
    Murrays Sports
    $5.99
    Hobie factory replacement retainer clip for Hobie 20-style tiller connector and adjuster kit (#07-1953). TILLER CONNECTION RETAINER CLIP - HOBIE 20. 40590000 MURRAYS.COM - IN STOCK
    Hobie 1953 tiller connection kit - new style
    H-20 TILLER CONNECTOR RETAINER CLIP
    Hobie
    $5.99
    Out of Stock
    Hobie 16 One Piece Gudgeon Upper and Lower Bushing Insert - 50102010
    H-16 ONE PIECE GUDGEON UPPER AND LOWER BUSHING INSERT
    Hobie
    $5.99
    Screw Delrin 3/8-16 X .75"

Murrays Part# 50-8032001

Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System.

Hobie Part# 8032001
    HOBIE RUDDER RAKE ADJUSTMENT SCREW - 8032001
    Hobie
    $5.99
    Tracker: Sheave

The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's. Hobie® factory item #11880000.

Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave.

Fits Hobie Getaway Main Traveler Car.
    TRACKER TRAVELER SHEAVE
    Hobie
    $5.99
    Hobie rudder bushing. Hobie part number 8062001
    RUDDER TITE BUSHING EACH
    Murrays Sports
    $5.50
    Out of Stock
    H16 Mast Seal Plate

Murrays Part# 50-21090001

Hobie® factory replacement mast seal plate for Hobie® 16.
    H-16 MAST SEAL PLATE
    Hobie
    $5.39
    Hobie factory tiller connector insert bearing for Hobie 20 Miracle. Hobie part number 40680001. Murrays.com - in stock
    HOBIE TILLER CONNECTOR INSERT BEARING
    Hobie
    $5.39
    Out of Stock
    BOLT 3/8-16x4" HX HD MST HV
    Misc
    $5.39
    Hobie Tracker Deck Plate

Murrays Part# 007-1051

The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's

Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system.

Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block.

Sold individually

Hobie part# 11870000
    Hobie Tracker Deck Plate

Murrays Part# 007-1051

The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's

Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system.

Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block.

Sold individually

Hobie part# 11870000
    TRACKER DECK PLATE (EA)
    Hobie
    $5.39
    KISME "IT" TRAVELER-EACH
    Misc
    $5.00
    Hobie 16 Batten Tie Set

Murrays Part# 001-3816

4 x jib batten ties and 8 main sail batten ties.
    H-16 BATTEN TIE SET
    Murrays Sports
    $5.00
    Yoke Stamping Only Stainless Steel
Murrays Part# 001-0063
Replacement yoke stamping for #01-0062 hiking stick yoke assembly. Compare to Hobie Cat® #3205.
    YOKE STAMPING ONLY (SS)
    Murrays Sports
    $5.00
    H16 Masthead Sheave Spacer

Murrays Part# 50-20614231

H16 Masthead Sheave Spacer. This is a replacement bearing surface for the comptip masthead sheaves in H16 mastheads.

Fits Hobie Getaway Masthead Sheaves

Hobie Part# 20644231
    H-16 MASTHEAD SHEAVE SPACER
    Hobie
    $4.99
    Rope Lock (Nylon)

Murrays Part# 001-0120

Easy-to-adjust black rope lock commonly used for trapeze height adjustment. Standard rope stop on Hobie®, Nacra and Prindle. Double-up back-to-back for extra strength. Hobie part number 61530000 for this rope lock.

Works on 3/16 to 1/4" line
    NYLON ROPE LOCK
    Murrays Sports
    $4.95
    H16 E-Clip Gooseneck

Murrays Part# 50-8062521

Hobie® factory replacement E-clip for gooseneck on Hobie® 16. The E-clip fits old-style boom pin that is grooved.

Hobie Part# 8062521
    H-16 E-CLIP GOOSENECK
    Hobie
    $4.79
    Jib Car Stop (Integrated Track)

Murrays Part# 50-25231051



Hobie® factory replacement jib car stop for Hobie 16's with integrated track (1995 and later).

Hobie Part# 25231051
    JIB CAR STOP (INTEGRATED TRACK)
    Hobie
    $4.59
    Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000
    Hobie drain plug 10091000 Hobie 18
    HOBIE DRAIN PLUG WITH GASKET
    Misc
    $4.50
    Toggle Strap 12"-24"

Murrays Part# 13-1020

Our handy toggle strap secures items with circumferences from 12" to 24". It is constructed of 1/8" shock cord that is secured with a 1-1/8" end stop.

Sold individually

Compare to Hobie Cat® Part# 370
    TOGGLE STRAP 12" - 24"
    Murrays Sports
    $4.00
    Recently viewed