All Hobie 16 parts: Sails, trampolines, jibs, lines, rigging, rudder parts.

Hobie 16 Parts

413 products

    All Hobie 16 parts: Sails, trampolines, jibs, lines, rigging, rudder parts.

    413 products
    Out of Stock
    HOBIE POCKET PROTECTOR KIT
    Hobie
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
    TELO-CAT REPLACEMENT VANE
    Davis
    The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Sold in pairs Hobie Cat Part# 10470000 Hobie Part# 5201
    The Murrays Rudder Cam Sister Screws: Hobie 14, Hobie 16 are a pair of sister screws for Hobie 14 and 16 rudder cams. These pins are much easier to install and remove than the stock pin and they are reusable! Sold in pairs Hobie Cat Part# 10470000 Hobie Part# 5201
    H-14/16 RUDDER CAM SISTER SCREWS
    Murrays Sports
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    Hobie, Nacra, Prindle Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Applications:  Hobie 14, 16, 17, 18, 18SX Sold in pairs Compare to Hobie Cat® Part#
    TILLER CONNECTION KIT (PR)
    Murrays Sports
    V JAM CLEAT BOOM (3/16" HOLES)
    Hobie
    Hobie Downhaul Cheek Block Murrays Part# 25-3340 The plastic sheave degrades and breaks on older Hobie® 16 downhaul cheek blocks and the entire block must be replaced. Also fits Sol Cat 18. Hole spacing 1/2" on center from side to side; 2-3/4" on center from end to end. To install, use four #19-5031 6-4 rivets and four #19-5020 sealing casings. Hobie Cat® Part# 20710000.
    HOBIE DOWNHAUL CHEEK BLOCK
    Hobie
    H14/16 Gooseneck Slide Murrays Part# 50-10772001 ​Gooseneck slide for Hobie® 14 or 16 is a factory replacement part.
    H-14/16 GOOSENECK SLIDE
    Hobie
    Hobie Shroud Anchor Bar Murrays Part# 50-50101701 This is the bar that the shroud anchor pins screws into to secure the shrouds on. Shroud anchor bar for Hobie Cat masts (replaces the nut used on older models). Use with the anchor pin to secure under the lip of the hull. Stainless steel Length: 3.5 inches Application: Hobie 14/16/17/18 sailboats Compare to Hobie Part# 50101701
    HOBIE SHROUD ANCHOR BAR
    Hobie
    Series 19 C-Track Track Fastener: 4mm (5/32”) countersunk fasteners at 75mm (3") centers Stop Holes: 19mm (3/4") centers Installation: Requires 19-5024 countersunk rivets Applications Dinghy and small catamaran jib sheet leads Adjustable hiking strap systems Dinghy outhauls Ronstan Part# RC9190
    RONSTAN SERIES 19 C-TRACK
    Ronstan
    Ronstan Single Block, Ferrule Murrays Part# 21-0469 This is the original clew block on most of the old Hobie cat Sailboats. This will work as a replacement jib clew block for Hobie® 14, 16 and 18 cats. Lightweight stainless block with ferrule has 1-1/8" x 5/8" sheave diameter, Delrin bearing and 1/2" line capacity. SWL: 950 lbs. This is a great option if you're looking to use a larger line diameter on your sheets or want the classic look.
    RONSTAN SINGLE BLOCK WITH FERRULE
    Ronstan
    Quick Release Pin Deluxe 3/16 X 1" Murrays Part# 18-3M100 This convenient pin features a deluxe dished head with a hole for lanyard attachment. No other locking pin is faster operating or safer. The pin is also available with a 1/16" x 7" stainless lanyard with nicropress ovals (see related items). Measurements for this quick pin with cup head are 3/16" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE PIN DELUXE 3/16 X 1"
    Misc
    Murrays Tell Tails Pack of 16 Murrays PN 001-3825 Black ripstop nylon tell-tales attach to the sail with adhesive patches to visually aid in trimming the sail.  Compatible with both the main and jib sails. Set includes: 6 x pairs of Black tell tails 4 x Black Leech tell tails
    MURRAYS TELL TAIL SET
    Murrays Sports
    7"X17" Zip Pouch-Assorted Colors Murrays Part# 31-1402 The Murrays Zip Pouch 7"X17" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    7"X17" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    Jib Traveler Cars for Original Track Murrays Part# 012-3020 Tren Tec's black plastic cars have four holes and slide freely in the track. Low profile shape saves needed space when mast is raked to the extreme. For 1996 and earlier Hobie 16s with external track that is riveted to the crossbar. Sold as a Pair. Hobie part number 1552 Sold in pairs
    JIB TRAVELER CARS (PAIR)
    Tren-Tec
    Jib Traveler Cars Integrated Murrays Part# 012-3021 These cars by Tren Tec fit Hobie's integrated jib track which is extruded into the crossbar, as opposed to the external track which is riveted to the crossbar (standard on pre-1997 Hobie® 16's). The black plastic cars have four holes and slide freely in the track. Low profile shape saves needed space when mast is raked to the extreme. Hobie Cat® uses #1553 for this item Sold as a pair
    JIB TRAVELER CARS INTEGRATED
    Tren-Tec
    Quick Release Pin Deluxe  3/16 X 3/4" Murrays Part# 18-3M075 This Quick Release Pin features 2 locking balls for a extra secure grip, and a push button deluxe dished head with a hole for lanyard attachment. The Deluxe pin is quick and easy to remove and install, and makes getting on and off the water quicker and easier.
    QUICK RELEASE PIN DELUXE 3/16 X 3/4"
    Misc
    Harken 8mm Bow Shackle Murrays Part# 28-2117 The Harken 8mm Bow Shackle is a forged stainless steel shackle that is polished to a high luster and stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Their large interior opening allows plenty of articulation especially when attached to a round bail.
    HARKEN 8MM BOW SHACKLE
    Harken
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    5"X12" Zip Pouch-Assorted Colors Murrays Part# 31-1401 The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    5"X12" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    H16 Aussie Pigtail Assy Replacement 5/32" pigtail for Aussie jib halyard kit for Hobie® 16 (#01-3302)
    H-16 AUSSIE PIGTAIL ASSY
    Murrays Sports
    Hobie Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat. Available in white and black. Compatible with al beach cats: Nacra, Prindle, A-Cat, Dart, Sol Cat, G-Cat...
    11" SHROUD ADJUSTER COVERS
    Hobie
    TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001
    TILLER ARM END CAP SWIVEL
    Hobie
    Out of Stock
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    H14/16 Upper Gudgeon Murrays Part# 25-3351 This latest, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    H-14/16 UPPER GUDGEON
    Murrays Sports
    Halyard 5"X 9" Zip Pouch-Assorted Colors Murrays Part# 31-1400 The Murrays 5" x 9" zippered halyard pouch is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the tramp lacing. The off-center zipper is designed for easy stuffing of your boat's halyard. The pouch is also handy for storing replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 7
    HALYARD 5"X9" ZIP POUCH- ASSORTED COLORS
    Murrays Sports
    SAIL NUMBER 14" U-CUT BLACK
    Murrays Sports
    Ronstan Figure 8 Trapeze Ring Murrays Part# 25-3610 Original equipment for Hobie® trapeze systems, the figure 8 ring is 6" long with 1-1/2" rings.
    RONSTAN FIGURE 8 TRAPEZE RING (EACH)
    Ronstan
    Ronstan Small Becket Block Murrays Part# 21-0188 Use this Ronstan single block with becket for 3:1 system for boom vangs or righting aids. 1/4" line capacity. SWL 660 lbs.
    RONSTAN SMALL BECKET BLOCK
    Ronstan
    Ronstan Toggle Pin 15.9mm Long 6.4mm Diameter Murrays Part# 21-1155 Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1155L
    RONSTAN TOGGLE PIN 1/4 x 5/8"
    Ronstan
    SAIL "HC" LOGO U-CUT PR BLACK
    Murrays Sports
    Ronstan Mast Head Sheave (European) Murrays Part# 51-13041700 This is a downhaul sheave for the basic Hobie 16 Downhaul system. Hobie Europe factory replacement "halyard" sheave. But by the looks of their parts list its a down haul sheave that goes on the bottom of the gooseneck.
    RONSTAN MAST HEAD SHEAVE (EUROPEAN)
    Ronstan
    Kisme "OK" Car Only Murrays Part# 005-0400 H16 Jib car upgrade kit. Stainless construction with remote traveler control attachment points and low profile jib sheet becket attachment. Purchase the H16 Traveler control kit to upgrade your vintage jib car and sheeting system. Sold Individually
    OXEN BLOCK "OK" CAR ONLY (EA)
    Oxen
    Kit for Hobie® 14 or 16 includes 16 pieces: mast hinge pin, clevis pin assortment and split ring assortment. Compare to Hobie Cat® #30303.
    H-14/16 PINS AND RINGS KIT
    Murrays Sports
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Out of Stock
    Port-Lance Cleat Murrays Part# 007-359P The Lance Cleat - Port utilizes a single rugged aluminum alloy cam mounted vertically in a black molded frame. The rope slides in sideways and runs freely thru the fairlead, which has a colored roller incorporated in the top for easier sheeting and identification. Ideal for use in confined spaces. For use with 3/16 to 1/4" line. The base is 22mm x 30mm.
    PORT-LANCE CLEAT
    RWO
    Out of Stock
    Starboard-Lance Cleat Murrays Part# 007-359S The Lance Cleat - Starboard utilizes a single rugged aluminum alloy cam mounted vertically in a black molded frame. The rope slides in sideways and runs freely thru the fairlead, which has a colored roller incorporated in the top for easier sheeting and identification. Ideal for use in confined spaces. For use with 3/16 to 1/4″ line. The base is 22mm x 30mm.
    STARBOARD-LANCE CLEAT
    RWO
    Jib Traveler Car Plate Only Murrays Part# 50-2524001 Hobie® factory replacement jib traveler car plate. Can be used on port or starboard side of the boat.
    JIB TRAVELER CAR PLATE ONLY
    Hobie
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    10 Hole Hobie shroud adjuster
    10 HOLE SHROUD ADJUSTER
    Misc
    Recently viewed