All Hobie 16 parts: Sails, trampolines, jibs, lines, rigging, rudder parts.

Hobie 16 Parts - All

434 products

    Murrays Sports is a one stop shop for all Hobie 16 replacement parts, rigging, sails, hardware, trampolines, rudder components, and accessories. Find quality parts to maintain, repair, and upgrade your Hobie 16 for peak performance on the water.

    Hobie 16 Parts and Accessories

    Keep your Hobie 16 sailing at its best with high-quality replacement parts and accessories. Whether you're repairing worn equipment, upgrading performance components, or performing routine maintenance, you'll find the parts you need to keep your catamaran in top condition.

    Browse a complete selection of Hobie 16 parts, including:

    • Standing and running rigging - shrouds, halyards, bridles, forestays and trapeze wires.
    • Rudder and tiller components
    • Trampolines and trampoline accessories
    • Mast and boom hardware
    • Sail battens and sail accessories
    • Blocks, cleats, and sheeting lines and compete control systems
    • Hull fittings and replacement hardware
    • Beach wheels and launching accessories

    Murrays inventory is designed to help Hobie sailors extend the life of their boats while maximizing safety, speed, and performance. Whether you're a recreational sailor, racer, or sailing school, Murrays offers reliable Hobie 16 replacement parts for every maintenance and upgrade project.

    Use the hyperlinked Hobie 16 illustrated parts list to help you find the parts that you need.

    Or shop by category: Sails, boom parts, hull parts, trampolines, upgrades and accessories.

    434 products
    Ronstan Toggle Pin 15.9mm Long 6.4mm Diameter

Murrays Part# 21-1155



Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1155L
    RONSTAN TOGGLE PIN 1/4 x 5/8"
    Ronstan
    $21.15
    Out of Stock
    Coffee Marine Bridle Vane Replacement Vane

Murrays PN 001-7050-G

Sensitive, rigid and light! The classic bridle vane for the Hobie 16 and other racing cats. These are made in our warehouse and will fit the Hobie Bridle Vane assembly or the classic Coffee Marine assemblies. The Coffee Marine vanes are slightly more rigid than the Hobie wind vane, making them last longer and less likely to flap in the wind.

Compatible with Hobie Bridle vanes.

Hobie part number CM7703
    Coffee Marine Bridle Vane Replacement Vane
    Murrays Sports
    $21.00
    SAIL "HC" LOGO U-CUT PR BLACK
    Murrays Sports
    $21.00
    Ronstan Mast Head Sheave (European)

Murrays Part# 51-13041700



This is a downhaul sheave for the basic Hobie 16 Downhaul system. Hobie Europe factory replacement "halyard" sheave.  But by the looks of their parts list its a down haul sheave that goes on the bottom of the gooseneck.
    RONSTAN MAST HEAD SHEAVE (EUROPEAN)
    Ronstan
    $20.00
    Kisme "OK" Car Only
Murrays Part# 005-0400
H16 Jib car upgrade kit. Stainless construction with remote traveler control attachment points and low profile jib sheet becket attachment. Purchase the H16 Traveler control kit to upgrade your vintage jib car and sheeting system.
Sold Individually
    OXEN BLOCK "OK" CAR ONLY (EA)
    Oxen
    $20.00
    Kit for Hobie® 14 or 16 includes 16 pieces: mast hinge pin, clevis pin assortment and split ring assortment.

Compare to Hobie Cat® #30303.
    H-14/16 PINS AND RINGS KIT
    Murrays Sports
    $20.00
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    $19.99
    Out of Stock
    Port-Lance Cleat

Murrays Part# 007-359P

The Lance Cleat - Port utilizes a single rugged aluminum alloy cam mounted vertically in a black molded frame. The rope slides in sideways and runs freely thru the fairlead, which has a colored roller incorporated in the top for easier sheeting and identification. Ideal for use in confined spaces. For use with 3/16 to 1/4" line. The base is 22mm x 30mm.
    PORT-LANCE CLEAT
    RWO
    $19.99
    Out of Stock
    Starboard-Lance Cleat

Murrays Part# 007-359S


The Lance Cleat - Starboard utilizes a single rugged aluminum alloy cam mounted vertically in a black molded frame. The rope slides in sideways and runs freely thru the fairlead, which has a colored roller incorporated in the top for easier sheeting and identification. Ideal for use in confined spaces. For use with 3/16 to 1/4″ line. The base is 22mm x 30mm.
    STARBOARD-LANCE CLEAT
    RWO
    $19.99
    Out of Stock
    Jib Traveler Car Plate Only

Murrays Part# 50-2524001



Hobie® factory replacement jib traveler car plate. Can be used on port or starboard side of the boat.
    JIB TRAVELER CAR PLATE ONLY
    Hobie
    $19.99
    Hobie Sail Feeder Kit

Murrays Part# 50-80100501

Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    Hobie Sail Feeder Kit
Murrays Part# 50-80100501
Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie's Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    $19.99
    10 Hole Hobie shroud adjuster
    10 HOLE SHROUD ADJUSTER
    Misc
    $19.99
    Tracker Traveler Sheave Replacement Kit

Murrays Part# 007-1059



The standard replacement sheave for the tracker traveler on all Hobie® 14, 16 and newer 17's. 

Tracker is the term used by Hobie for the rear traveler car. This can also be considered a traveler sheave.

Fits Hobie Getaway Main Traveler Car.

Hobie® Part# 11880000
    TRACKER TRAVELER SHEAVE REPLACEMENT KIT
    Hobie
    $19.95
    Rudder Pins H14/16 Pair (Nylon)

Murrays Part# 001-2271

Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16.

Each pair is equivalent to two Hobie Cat® item #10881000

Sold in pairs
    H-14/16 NYLON RUDDER PINS PR
    Murrays Sports
    $19.00
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole

Murrays Part# 21-0636



The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081.

Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    Ronstan bow shackle measurements
    RONSTAN 5/16" BOW SHACKLE
    Ronstan
    $18.49
    Hobie trapeze shock cord 20730001 and 20730002
    H-14/16 TRAP SHOCK CORD
    Murrays Sports
    $18.00
    ELONGATED TRAPEZE RING

Large trapeze ring made of solid 316 stainless steel for strength and longevity.

AKA: dog bone, harness ring, harness loop, trap ring, trapeze ring. 

Hobie part number 2002, compare to Hobie part number 2001

Length: 7-1/2"
    ELONGATED TRAPEZE RING
    Misc
    $17.99
    H14/16 Main Halyard Hook

Murrays Part# 25-3330

The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation.

Hobie part# 10680000
Nacra part number 6812
    H-14/16 MAIN HALYARD HOOK
    Hobie
    $17.99
    Hobie Gooseneck Hinge Vertex

Murrays Part# 50-50772031
Hobie® factory replacement gooseneck vertex for all Hobie® Cats.


Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    $17.99
    Hobie® factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40550001. Murrays.com - In stock
    Hobie 1953 tiller connection kit - new style
    HOBIE THREADED TILLER CONNECTOR END CAP 1953
    Hobie
    $17.99
    Hobie® factory replacement end cap for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40561001 and 40561000
    Hobie 1953 tiller connection kit - new style
    H-20-1995 & LATER TILLER CONNECTOR END CAP
    Hobie
    $17.99
    Out of Stock
    Swivel Mount Base with Fasteners

Murrays Part# 007-1162

The offset base pad kit fits Hobie® and Prindle elliptical crossbars. Includes injection-molded plastic base and fasteners.

Replacement fasteners are also available (requires 3 self-tapping screws #19-1620, 1 machine screw #19-1516, and 1 nut #19-2016).

Hobie Cat® Part# 1162
    PRINDLE SWIVEL MOUNT BASE WITH FASTENERS
    Hobie
    $17.99
    SMALL BLOCK W/REMOVABLE SHEAVE

This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires.

Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity.

Hobie item #3103
    SMALL BLOCK W/REMOVABLE SHEAVE

This small block is used on trapeze adjustment systems where the removable sheave enables installation without cutting wires.

Specifications: 1-3/16" removable sheave, Teflon® bearing and 5/16" line capacity.

Hobie item #3103
    SMALL BLOCK WITH REMOVABLE SHEAVE
    Murrays Sports
    $17.50
    Heavy Duty Swivel with Aluminum Cam Roller Fairlead

Murrays Part# 25-3020



Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
    ROLLER FAIRLEAD KIT (SWIVEL)
    Murrays Sports
    $17.50
    H-16 UPPER FORESTAY 5/32 BARE

Murrays PN 002-0235-00


Upper forestay for The Hobie® 16 is constructed of 7x19 - 5/32" bare wire to factory specifications. Compare to Hobie Cat® #20810011.

This part is used as part of the classic halyard/ forestay configuration and it holds the stainless pulley that the jib halyard cable attaches to.

This will also work to hold your Aussie halyard block assembly.
    Hobie 16 forestay and jib halyard parts chart
    H-16 UPPER FORESTAY 5/32" BARE WIRE
    Murrays Sports
    $17.50
    Hobie Rudder Cam
Hobie part number 10480000
Hobie factory replacement cam. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape.

Used on all Hobie Catamarans with metal housing rudder systems. Compatible on all Hobie 14, 16, 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.

Not compatible with the Hobie Wave and Getaway EZ Loc plastic rudder housing rudder system.
    HOBIE RUDDER CAM
    Hobie
    $16.99
    Out of Stock
    Boom End Cap H14/16 Forward
Murrays Part# 50-10740011
Hobie® factory replacement end cap for the forward end of Hobie® 14 or 16 boom. Also for Hobie® 21SC. Use three #19-5032 6-6 rivets for installation.
    H-14/16 FORWARD BOOM END CAP
    Hobie
    $16.99
    Rudder Return Kit for H14/16-Inter

Murrays Part# 012-2049
This Rudder Return Kit for H14/16-Inter by Tren Tec eliminates kick-up. Rudders return to down position easily with one hand and tension holds rudder down if a cam fails. Accommodates both rudders.
Use this page to order product numbers 12-2049 (for Hobie® 14/16/Inter; Hobie Cat® item #1544)) and 12-2059 (for Hobie 17/18/21)
    H-14/16 INTER RUDDER RETURN KIT
    Tren-Tec
    $16.98
    Adjustable Leech Batten Caps H16
Murrays Part# 012-3003
No more knots at the trailing edge. Adjustable batten caps for Hobie® 16 enable sail shape adjustment in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 8 batten caps and pre-cut line.
    H-16 ADJUSTABLE BATTEN LEECH CAPS (8)
    Tren-Tec
    $16.98
    Shroud Stay Adjuster 7 Hole

Murrays Part# 25-3310

Stainless steel shroud adjuster with seven 1/4" holes.

​Use #22-9802 clevis pin at top and #22-9808 at bottom.

Fits: H14/16/18/20, Wave and Getaway.

Compare to Hobie Part# 20830010
Nacra - Prindle part number 9893
    SHROUD STAY ADJUSTER 7-HOLE
    Murrays Sports
    $15.99
    H14/16 Bow Tang

Murrays Part# 50-20120000

Hobie® factory replacement bow tang for Hobie® 14, 16 or Getaway. Use #19-3530 screw and #19-2520 nylock nut on Hobie 16; use #19-3530 screw on Hobie 14.

The original Hobie® 14 tang is no longer available.
20120010
    Hobie factory replacement bow tang for Hobie 14, 16 or Getaway. Use #19-3530 screw and #19-2520 Nylock nut on Hobie 16;

use #19-3530 screw on Hobie 14.

The original H14 tang is no longer available.

Hobie Part# 20120000 and 20120010
    H-14/16 BOW TANG
    Hobie
    $15.99
    Sale
    Jib track 5/8” used
    Murrays Sports
    Sale price $15.00 Regular price $30.00 Save $15
    Aussie Jib Halyard Pigtail

Murrays PN 002-0284-00R

Jib halyard pigtail for the Aussie system on a Hobie 16.  Constructed with 1/8" 7x19 bare wire.


Compare to Hobie part number 20810041.

This model is built to the 2009 factory spec.

​Often paired with a 28-0186 Harken Fiddle Block.
    H-16 AUSSIE JIB HALYARD PIGTAIL
    Murrays Sports
    $15.00
    Harken Cleat Adapter with Hardware

Murrays Part# 007-50010



Hobie Factory Part 50010
    CLEAT ADAPTER PLATE WITH HARDWARE
    Hobie
    $14.99
    H14/16 Gooseneck Downhaul Ring

Murrays Part# 50-10772070



​Gooseneck downhaul ring for Hobie® 14 or 16 is a factory replacement part.
    H-14/16 GOOSENECK DOWNHAUL RING
    Hobie
    $14.99
    Out of Stock
    Soft Grip Standard Extension .570 x 11"

Murrays Part# 007-3206

This is a grip upgrade for the standard Hobie Tiller extension, it will also fit the Murrays fixed tiller extension as well.

Hobie Part# 3206
    SOFT GRIP STANDARD EXTENSION .570 x 11"
    Hobie
    $14.99
    Murrays Part# 001-0062
Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072
Applications: All Hobies and Prindles
Tiller Yoke Assembly: 1
    Tller connection kit - yoke assembly - Hobie, Nacra, Prindle
    TILLER YOKE ASSEMBLY WITH SPACERS
    Murrays Sports
    $14.99
    Hobie Tiller Extension Hinge

Murrays Part# 50-10532010

Hobie® factory replacement tiller extension hinge for #50-20550001 Hobie® Fiberglass tiller extension. Also used on Nacra tillers.

Hobie Part Number: 10532010
    Hobie Tiller Extension Hinge

Hobie Part number 10532010

Hobie factory replacement tiller extension hinge for #50-20550001 Hobie Fiberglass tiller extension. Also used on Nacra tillers.

Hobie Part# 10532010
    HOBIE TILLER EXTENSION HINGE
    Hobie
    $14.99
    Out of Stock
    Twist Toggle: Hobie/Prindle
Murrays Part# 25-3320
Stainless steel twist toggle is the standard equipment connection between the shroud anchor pin and shroud adjuster on many catamarans. The twist toggle acts as a universal joint to help eliminate binding. Hobie Cat® item #20210000.
    HOBIE/PRINDLE TWIST TOGGLE
    Hobie
    $14.99
    Out of Stock
    EASY RIGG TOOL RED
    Murrays Sports
    $14.95
    Recently viewed