All Hobie 16 parts: Sails, trampolines, jibs, lines, rigging, rudder parts.

Hobie 16 Parts - All

434 products

    Murrays Sports is a one stop shop for all Hobie 16 replacement parts, rigging, sails, hardware, trampolines, rudder components, and accessories. Find quality parts to maintain, repair, and upgrade your Hobie 16 for peak performance on the water.

    Hobie 16 Parts and Accessories

    Keep your Hobie 16 sailing at its best with high-quality replacement parts and accessories. Whether you're repairing worn equipment, upgrading performance components, or performing routine maintenance, you'll find the parts you need to keep your catamaran in top condition.

    Browse a complete selection of Hobie 16 parts, including:

    • Standing and running rigging - shrouds, halyards, bridles, forestays and trapeze wires.
    • Rudder and tiller components
    • Trampolines and trampoline accessories
    • Mast and boom hardware
    • Sail battens and sail accessories
    • Blocks, cleats, and sheeting lines and compete control systems
    • Hull fittings and replacement hardware
    • Beach wheels and launching accessories

    Murrays inventory is designed to help Hobie sailors extend the life of their boats while maximizing safety, speed, and performance. Whether you're a recreational sailor, racer, or sailing school, Murrays offers reliable Hobie 16 replacement parts for every maintenance and upgrade project.

    Use the hyperlinked Hobie 16 illustrated parts list to help you find the parts that you need.

    Or shop by category: Sails, boom parts, hull parts, trampolines, upgrades and accessories.

    434 products
    H16/18 Jib Halyard Block Assembly Murrays Part# 50-20240001 Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2". Hobie part# 20240001
    Hobie 16 forestay and jib halyard parts chart
    HOBIE 16/18 JIB HALYARD BLOCK ASSEMBLY
    Hobie
    H-16 TRAPEZE WIRE SET The Murrays H-16 Trapeze Wire Set is available in 2 colors White and Black PVC Coated 316 stainless steel wire.  Available in 2 Sizes: "Single - 2 handles", which includes one handle per side of the boat and "Double - 4 handles" which includes 2 handles per side of the boat. Each pair is single continuous 3/32″ (1×19) coated wire with two handles for trapezing. A single thimble at the top eliminates clutter. Murrays Hobie 16 Trap Wires are 16′ 8″ Pull to Pull
    H-16 TRAPEZE WIRE SET
    Murrays Sports
    This is for use on the classic style Hobie 16 jib halyard system with a short upper forestay and metal pulley up near the mast tang that was standard in the 70s, 80s and early 90s. There are 2 styles of Hobie 16 jib halyard. This wire Hobie 16 jib halyard works with the old style upper and lower forestay and the metal halyard pulley. The 2nd style is the Aussie jib halyard with it's parallel forestay and jib halyard that became stock in the mid 1990s. Compare to Hobie Part# 20661001
    H16 JIB HALYARD WITH LINE
    Murrays Sports
    Out of Stock
    HOBIE 2020 ERA HULL DECAL (RIGHT SIDE)
    Hobie
    Out of Stock
    Hobie 2020 Era Hull Decal (Left Side) Murrays Part# 50-22330041 Peel and stick on Hull Decal for the Port Hull. Hobie part number 22330041, 22330051
    HOBIE 2020 ERA HULL DECAL (LEFT SIDE)
    Hobie
    H16 Jib Halyard with Shackle Murrays Part# 002-0284-00 Jib halyard with shackle for Hobie 16 is constructed to factory specifications. This is for use on the classic style H16 jib halyard system with a metal sheave up near the mast tang that was standard in the 70s and 80s. The rope section of the jib halyard is 20' of 3/16ths line. Compare to Hobie Part# 20661001
    Hobie 16 forestay and jib halyard parts chart
    H-16 JIB HALYARD WITH SHACKLE
    Murrays Sports
    Hobie 16 Shroud Extra Heavy Duty 5/32" Murrays Part# 002-0205-12 The Murrays Heavy Duty 5/32" Hobie 16 shroud (sidestay) wire is an extra heavy duty shroud for the Hobie 16.  It is 5/32 wire compared to the standard 1/8" wire and we use a roller swaged marine eye fitting on the lower connection point. Our hydraulic swager exerts a force of over 10,000 pounds to quickly swage without work-hardening the stainless fittings. 20790011
    H-16 SHROUD HEAVY DUTY 5/32" WIRE
    Murrays Sports
    Sale
    ​​Murrays Rudder Covers for Hobies The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing. The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover. Unit: Pair Made in the U.S.A. Compatibility: Fits all Hobie rudders except the H21SE (Special
    ​​Murrays Rudder Covers for Hobies The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing. The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover. Unit: Pair Made in the U.S.A. Compatibility: Fits all Hobie rudders except the H21SE (Special
    MURRAYS HOBIE RUDDER COVER
    Murrays Sports
    Save $24
    The Hobie 16 and 14 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn’t absorb water the way carpet does, so it dries quickly! Includes​ four 4" x 40" strips - covers both sidebars. Compare to Hobie Cat® Rail Rug #1671BLK.
    The Hobie 16 and 14 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn’t absorb water the way carpet does, so it dries quickly! Includes​ four 4" x 40" strips - covers both sidebars. Compare to Hobie Cat® Rail Rug #1671BLK.
    H14/16 SUREFOOT EVA KIT
    Murrays Sports
    Out of Stock
    H16 Gudgeon Casting Murrays Part# 50-50102011 Standard on current production Hobie 16s, these die cast aluminum gudgeons are now available for your Hobie 16. Their one piece construction and plastic bushed pin holes guarantee pin hole alignment, reducing rudder pin wear, slop and drag. Die cast aluminum construction Standard on all Hobie 16 catamarans Uses 8x #8030402 screw for installation (sold separately)
    H-16 GUDGEON CASTING
    Hobie
    Hobie 16 Super Flex Jib Batten Set Hobie part number 0122
    MURRAYS H16 SUPER FLEX JIB BATTEN SET
    Murrays Sports
    Out of Stock
    Telo-Cat Bridle Vane; Murrays Part# 008-1450 Designed especially to take the abuse of catamaran sailing, the Telo-Cat is durable and highly visible. It installs on the headstay bridle in seconds and is easily removed for trailering with no tools required. It comes complete with 8" vane, adjustable tacking arms and mounting hardware to fit most catamarans. The Telo-Cat is made of high-impact plastic with a stainless steel shaft and tacking arms. The vane rides on a super sensitive Teflon® bearing syst
    TELO-CAT BRIDLE VANE
    Davis
    H16 Dolphin Striker Post Murrays Part# 50-20140001 Hobie® factory replacement dolphin striker post fits all Hobie® 16 mast steps (older and newer)
    H-16 DOLPHIN STRIKER POST
    Hobie
    Hobie 16 main halyard for all aluminum masts. Hobie part number 20651011
    Hobie 16 Main Halyard with Shackle is a wire halyard for the all-aluminum mast (no Comp-Tip) Hobie 16 and is used to raise the main sail. Compare to Hobie Cat® #20651011
    H-16 MAIN HALYARD NON-COMPTIP
    Murrays Sports
    Sale
    BIG DRYER SAIL & BOOM BAG
    Murrays Sports
    Save $20
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 107"
    Murrays Sports
    The Hobie 16 Aussie upper forestay runs parallel to the Aussie Forestay and is for the jib halyard line. The Jib Halyard line raises and jib and controls the mast rake. It runs from the top of the jib, thru the fiddle blocks and down the mast to the halyard cleat. The Aussie system provides a 4:1 pulley system to allow for easy mast rake adjustment on the fly and the independent forestay provides redundant a safety system if the jib luff wire or the jib halyard were to break. Hobie part number 20810041
    H-16 AUSSIE UPPER FORESTAY
    Murrays Sports
    H16/18/Getaway Mast Tang Murrays Part# 50-20690000 Hobie® factory replacement mast tang for Hobie® 16, 18, Getaway and the 1995 and newer Hobie® 17. Use twelve 6-4 rivets (#19-5031) and twelve casings (#19-5020) for installation. Also known as a mast hound
    H-16/18/GETAWAY MAST TANG
    Hobie
    Kissme Jib Traveler Car and Pulley
    KISME "OK" JIB TRAVELER CAR AND PULLEY
    Murrays Sports
    Sale
    H-16/18 Jib Halyard Block Assembly Used
    Hobie
    Save $24.99
    Out of Stock
    Hobie Mast Float Bracket-Mama Bob Murrays Part# 51-99000125 The Hobie mast float bracket is compatible with Mama Bobs. It is designed to install a mast float onto a solid aluminum Hobie 16 non-comptip mast head. Fits non-us boats, or old US boats with some modification.
    HOBIE MAST FLOAT BRACKET-MAMA BOB
    Hobie
    Out of Stock
    Third Hand Murrays Part# 007-2040 This is the closest thing to "self-steering" a Hobie® 14 or 16. The handy little device grips the hiking stick and holds it at a position of your choice. Great for light air sailing or when paddling in if the wind dies. It also keeps the rudders from flopping around when on the beach. Attaches at each end of the traveler track. Hobie Cat® item #204.
    THIRD HAND
    Hobie
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 104"
    Murrays Sports
    Out of Stock
    HOBIE 16 MAINSAIL BATTEN CAP KIT - LEACH - 1522H
    H-16 MAINSAIL BATTEN LEACH CAP KIT (8)
    Hobie
    Out of Stock
    H16 Straight Tiller Arm-Black Murrays Part# 50-20382011 Hobie® factory replacement straight tiller arm for Hobie® 16. This tiller arm can be used on new or old Hobie 16 beachcats. The straight tiller arm allows for increased mast rake, by allowing the tiller x-bar to sit lower when the rudders are locked down. When used on pre '83 rudder casting assemblies, the tiller connector kit may touch the decks when the rudders are in the "up" position.
    H-16 STRAIGHT TILLER ARM-BLACK
    Hobie
    Shock Cord Tramp Lacing Kit H14/16/18 Murrays Part# 001-2241 Shock Cord Tramp Lacing Kit H14, 16, 18 is for the recreational sailor who is lacing a trampoline. Shock Cord is usually the better choice over line tramp lacing. Just "set it and forget it" because shock cord maintains the tension you set when lacing your tramp. Shock cord also reduces tramp and grommet wear because the load is spread over multiple grommets, especially when walking on the tramp. The latest technology shock cord used in our kits
    H-14/16/18 SHOCK CORD TRAMP LACING KIT
    Murrays Sports
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 97.5"
    Murrays Sports
    Murrays Part# 001-2050 The Hobie Rudder Cam Kit: Hobie 14, Hobie 16 are replacement rudder cams to keep the rudder lock-down mechanism on your Hobie Cat® functioning properly. The Hobie® 14 or 16 kit includes two cams, two reusable, internally threaded sister screws for both sides, and instructions. Purchase the complete kit if your boat has the stock flare pins; purchase just the cams (#50-10480000 each) if your boat already has sister screws.  Compare to Hobie Cat® #5202.
    H-14/16 RUDDER CAM KIT
    Murrays Sports
    JIB CLEW BLOCK KIT
    Murrays Sports
    Out of Stock
    HALYARD CLEAT (10 PACK)
    Hobie
    104" Hobie batten part number 21000001
    H-16 MAINSAIL FIBERGLASS BATTEN 91"
    Murrays Sports
    Adjustable Tiller Endcap Murrays Part# 51-99000010 Extra long tiller crossbar end cap from Hobie Europe. Pro Tip: Put some McLube One Drop or Corrosion X on the screw before installing to prevent seizing.
    ADJUSTABLE TILLER ENDCAP
    Murrays Sports
    The Aussie forestay replaced the original upper and lower forestay system in 2009 on the Hobie 16 as the factory standard. It is modeled after what the dominant Aussie racers using on their boats. Aussie forestays are longer than the classic halyard forestays actually have a separate connection cable for the jib halyard. The separate attachment point for the jib halyard provides a back up if either were to fail. If either the forestay or jib halyard were to break, the other will hold the m
    H-16 AUSSIE FORESTAY
    Murrays Sports
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc
    H-16 MAIN SHEET SPUN BRAID
    Robline
    Out of Stock
    Hobie 16 Jib Batten Cap Kit The Hobie 16 jib batten cap kit includes 4 jib batten leech caps and 4 batten tie lines. Hobie part number 1531 Hobie 16 jib batten cap part number 21333000
    H-16 JIB BATTEN CAP KIT
    Hobie
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    Out of Stock
    Gudgeon Long Locking Screws Murrays Part# 50-8030401 Hobie® gudgeon self-locking #12-24 screws come in a package of 16.
    GUDGEON LONG LOCKING SCREWS (16)
    Hobie
    Specs: 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat® Part# 20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie Part# 8020410 and 8020411 clevis pin
    QUICK RELEASE DELUXE PIN 1/4 X 1"
    Misc
    Recently viewed