Murrays Marine - Catamaran specialists

All

3171 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3171 products
    MAST HINGE PIN NACRA/H17/20 Murrays Part# 56-F158 The mast base engages the mast ball and is secured by this headless clevis pin to allow the mast to be safely raised or lowered. Specs: 1/4" diameter x 2-3/8" overall length with a grip length of 1-15/16" Compatibility: Nacra Inter, F18, N15, F17, 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ, as well as Hobie 17, Tiger and 20. Split rings are sold separately. Compare to Hobie Cat part number 50406301.
    NACRA MAST HINGE PIN
    NACRA
    H14/16 Bow Tang Murrays Part# 50-20120000 Hobie® factory replacement bow tang for Hobie® 14, 16 or Getaway. Use #19-3530 screw and #19-2520 nylock nut on Hobie 16; use #19-3530 screw on Hobie 14. The original Hobie® 14 tang is no longer available. 20120010
    H-14/16 BOW TANG
    Hobie
    Tack Clew Plate Replacement Kit Murrays Part# 001-1016 ​The Tack & Clew Plate Replacement Kit includes one pair anodized aluminum plates with rivets to be set with a hammer. Rounded triangular plates measure 2-1/2″ by 2-1/2″ by 3″. Replacement rivets are available separately (#19-5005). These are commonly used as the H16 main sail clew plate and tack plate on older H16 sails. Newer sails use a hydraulic press ring at the tack and clew. Compare to Hobie part number 12240000.
    TACK AND CLEW PLATE REPLACEMENT KIT
    Murrays Sports
    Rudder Pins H17/18 Stainless Steel Murrays Part# 001-4273 Weight-saving compared to solid stainless steel pins, hollow stainless rudder pins with still beefy .065″ wall provide reduced wear and the good long-term durability. The universal stainless steel 3/8″ x 9-1/4″ rudder pins are suited for; Hobie 17/18/20 rudder castings. Also used on older Hobie Wave and Getaways with metal rudder castings. Cotter pins are included. Alternative to Hobie Cat® #60880011.  (* Pre EZ LOC Rudder c
    H-17/18 RUDDER PINS PR (SS)
    Murrays Sports
    Hobie 18 shroud - side stay - Hobie part number 6079001 white and 60792001 black
    H-18/21 SC SHROUD 5/32" ROLLER SWAGED
    Murrays Sports
    The Hobie 18 Trapeze Shock Cord is an absolute necessity because it keeps the trapeze system in place and ready for hook-up. On this kit for Hobie® 18, one hook connects to either the thimble on the trapeze wire or the adjustment line, then runs through the hull fairlead and through the eyestrap under the lip of the hull near the bow or stern for crew and skipper trapeze lines respectively. The 3/16" shock cord stretches more and slides through ferrules better than larger diameter shock cord. Includes four
    H-18 TRAP SHOCK CORD (4)
    Murrays Sports
    The Hobie Baby Bob Mast Float is designed to offer the safety and security of mast head flotation with minimized drag through the air, the Baby Bob is fixed in position to the mast head with the included mounting hardware. The Baby Bob is standard on all Hobie Waves This float will also fit the Getaway and Hobie 16 with or without CompTip. Some drilling may be necessary. The larger Mama Bob (#07-30119) is also an option for most Hobies. The Baby Bob Mast Float displaces 32 pounds of water, is 20" long x 1
    MAST FLOAT WAVE BABY BOB
    Hobie
    Daggerboard Carpet Murrays Part# 56-1082 ​Approximately 1-1/2″ wide carpet installs in daggerboard wells. Nacra factory item #1083. Sold by the foot.
    DAGGERBOARD CARPET
    Murrays Sports
    RIVET MCP 6-8 3/16x1/2" PH Murrays Part# 50-8011231 Hobie® factory 6-8 heavy duty rivet requires a rivet tool for installation. 3/16" x 1/2" pan head. Fits Hobie Getaway Eyelet Post. Fits Hobie 20 Eyelet Post. Mounts Wave Mast Step Hobie part number 8011231
    RIVET MCP 6-8 3/16x1/2" PH
    Hobie
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    Mast Hinge H-16 (Only) Murrays Part# 25-3360 Heavy duty mast base hinge for Hobie® 16 only (does not fit Hobie 14). Clevis pins are sold separately. NOTE: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step. The way to tell is if your mast step has a horizontal mast base then it is old style, new style has a slant toward the stern.
    H-16 (ONLY) MAST HINGE
    Murrays Sports
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Murrays Hobie 16 forestay 1/8" Black
    Murrays Hobie 16 forestay 1/8" Bare
    H-16 FORESTAY 1/8" WIRE
    Murrays Sports
    Sealed Rivet CCP 6-8 (3/16 X 1/2) Murrays Part# 19-5033S Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed. Sealed Stainless steel 3/16" x 1/2" rounded pan head rivet. Compare to Hobie Cat® #8011231 Rivet and Hobie Cat® #8011291 rivet casing.
    RIVET CCP SEALED 6-8 (3/16 X 1/2)
    Misc
    Hobie EZ Lock Rudder retainer clip Murrays Part# 50-90880231 Retainer clip for Hobie Bravo EZ Loc Rudder Housing. Hobie Part# 90880231
    HOBIE EZ LOCK RUDDER CLIP
    Hobie
    Clevis Pin 1/4X3/8 Murrays Part# 50-8020371 This is commonly used for Hobie Rigging parts. It has a 3/8" grip length. You can also use the 1/2" grip length pins also. Hobie Part# 8020371 or 8020370
    CLEVIS PIN 1/4 x 3/8"
    Hobie
    Hobie Shroud Anchor Bar Murrays Part# 50-50101701 This is the bar that the shroud anchor pins screws into to secure the shrouds on. Shroud anchor bar for Hobie Cat masts (replaces the nut used on older models). Use with the anchor pin to secure under the lip of the hull. Stainless steel Length: 3.5 inches Application: Hobie 14/16/17/18 sailboats Compare to Hobie Part# 50101701
    HOBIE SHROUD ANCHOR BAR
    Hobie
    Tiller Rudder Stiffening Kit: Prindle Murrays Part# 001-5141 Spring-loaded tiller connection with contoured spacers tightens the hinge connection on Prindles. Six plastic shims reduce slop between rudders and castings
    PRINDLE TILLER AND RUDDER STIFFENING KIT
    Murrays Sports
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    Cat Trax Molded End Cap Murrays Part# 13-1403 Replacement molded end cap keeps the boat from sliding off the end of the Cat Trax axle. Carpet protects your boat. Sold individually Hobie Cat® Part# 1620
    CAT TRAX MOLDED END CAP (EA)
    Cat Trax
    CHEATA MOTOR BRACKET
    Murrays Sports
    Rudder Casting Plunger H14/16 Murrays Part# 50-10440000 Hobie® factory replacement rudder casting plunger for Hobie® 14 or 16.
    H-14/16 RUDDER CASTING PLUNGER
    Hobie
    Use this 1/8″ Dacron line for batten tie line and roller furling systems. For batten ties, allow about 18″ of line for each batten. Sold per foot. Spool: 1000′ (304.9m). Compare to Hobie part number RH112WHT - 8004510
    1/8" DACRON SOLID BRAID
    Misc
    Spring Clip: 1/4-5/16 Murrays Part# 25-2204 Use this stainless spring clip for quick rudder pin removal or on 1/4" to 5/16" pins. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie 14, 16, 17, 18, 20, Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape.
    SPRING CLIP 1/4 - 5/16"
    Ronstan
    Hobie 16 One Piece Gudgeon Upper and Lower Bushing Insert - 50102010
    H-16 ONE PIECE GUDGEON UPPER AND LOWER BUSHING INSERT
    Hobie
    Split Ring Stainless steel split ring for 5/16″-3/8″ diameter clevis pins. The larger size makes it easier to get on and off. Large Split ring Dimensions: 3/4″ Diameter Material: 316 Stainless steel. Also called Ring Ding or Ringy Dingy. Hobie Part number 20860010 – RF686
    3/4" SPLIT RING
    Misc
    H-18/20 JIB HALYARD WITH CLIP
    Murrays Sports
    Fin Belt By Murrays Murrays Part# 011-1001 Securing your fins at your waist gives you the edge during dynamic water conditions. The Murrays Fin Belt holds fins within reach. Just unclip the quick release buckle and go. Water rescue personnel find these fin belts invaluable for surf and swift water operations. The fully adjustable belt is also a handy place to carry your knife horizontally so that it doesn't get in the way, a feature favored by search and rescue personnel.
    FIN BELT BY MURRAYS
    Murrays Sports
    Cat Trax Tire Tubes Murrays Part# 13-1401-9 Add an inner tube to the tire(s) of your Cat Trax beach dolly to prevent air leaks or squeeze some life out of your old tires. Sold individually
    CAT TRAX TIRE TUBE
    Cat Trax
    Out of Stock
    Hobie 1953 tiller connection kit - new style
    HOBIE TILLER CONNECTOR KIT
    Hobie
    GATH GEDI HALF VISOR
    Gath
    9/32" RACING PRO 7MM
    Robline
    Dacron Spun Braid 3/8″ The Dacron Spun Braid 3/8″ is very low-stretch sheeting line and has a soft, fuzzy surface that offers excellent grip and make it easy on the hands. It features a 100% polyester braided core with a spun polyester braided cover. The 3/8″ diameter is ideal for mainsheets on Hobies, Nacra and Prindle Catamarans. Sold per foot. Spools come in 600′. We recommend Dacron Spun Braid line for recreational cat sailors, it has a nice hand feel, cleats well and runs thru the blocks well. D
    3/8" DACRON SPUN BRAID 9MM
    Robline
    Wave Shroud 1/8" Black Wire Murrays Part# 002-0804-02 Single black shroud (sidestay) for Hobie® Wave is constructed to factory specifications. Compare to Hobie Part# 39790001
    WAVE SHROUD 1/8" BLACK WIRE
    Murrays Sports
    NACRA and Prindle Rudder Spring Murrays Part# 56-4016 The NACRA and Prindle Rudder Spring is the rudder spring for all Prindle and most newer Nacras (Late Model US boats, Inters and all European NACRA boats) is Nacra Sailing factory item #30418. Fits Nacra 460, Nacra 500, Nacra 570, Nacra 16, Nacra 17, Nacra F18 Infusion, Nacra F20 Carbon and all Inters.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    NACRA/PRINDLE RUDDER SPRING
    NACRA
    Murrays red, green and blue tell tails. Sail trimming guides.
    MURRAYS TELL TAIL SET
    Murrays Sports
    Micro D-Splicer Splicing Needle Murrays Extra Small Line Splicer for 1-2mm line The Murrays Extra Small Line Splicer for 1-2mm line is designed to splice really small diameter lines.  It is ideal for making kiteboarding line sets. Material: 316 stainless wire and a copper/nickel end stop Length: 6"
    MICRO D-SPLICER SPLICING NEEDLE
    Murrays Sports
    Ronstan Halyard Shackle, 1/4" Pin Murrays Part# 21-1033 The Ronstan Halyard Shackle with Twist Pin's main advantage is that you cant loose any of it once its attached. The top pin holds it on and the bottom pin dose not come out. Never loose your shackle pins again! The 1/4" Halyard Shackle with Twist Pin is used in the following Murrays Products: 02-4383-50 N-5.5SL Jib Halyard w/Shackle
    RONSTAN HALYARD SHACKLE, 3/16" PIN
    Ronstan
    Getaway Shroud 5/32" Black Wire Murrays Part# 002-0905-02 Single black shroud (sidestay) for Hobie® Getaway is constructed to factory specifications. Compare to Hobie Cat® Part# 37790001
    GETAWAY SHROUD 5/32" BLACK WIRE
    Murrays Sports
    CAT TRAX CRADLES (PAIR)
    Cat Trax
    Recently viewed