Murrays Marine - Catamaran specialists

All Sailing Parts

3138 products

    Murrays Sports is your best one stop shop for beach catamaran parts and accessories.  We stock both OEM and aftermarket parts for Hobie Cat Catamarans, Nacra Catamarans, and Prindle Catamarans.  We also have parts for Dart, Sol-Cat, G-Cat, Sabot and O'Pen Skiff Sailboats.

    We manufacture many OEM parts for these boats and have a full rigging shop onsite.  We make most of our rigging orders and ship within 24 hours of being ordered.

    Murrays has kits to make your life easier. From Rigging sets, Line Sets, Rudder locking kits, Rudder cam kits, Mast hinge kits, spare parts kits, rudder rebuild kits, cat righting kits, pins and rings kits and more.

    We manufacture many hard to find parts and source parts as needed when the OEM manufacturers discontinue items.

    Murrays has the largest selection of tiller extensions available with aluminum, fiberglass and carbon version s available in fixed length and adjustable length hiking sticks.

    We make 3 generations of Hobie 16 rigging and can help you get what you need for your boat.

    Custom rigging - Murrays can handle custom rigging requests from 3/32, 5/32 and 1/8" wire.  We use top quality 316 stainless wire for the best longevity.  We use professional grade tools and have experienced craftsmen with years of experience handling the rigging.

    Email us lengths, wire type and end pieces for a custom rigging quote.  Send quote requests to info(at)murrays.com.  Use the @ symbol in our email address instead of (at).  If we post the address we get even more spam.

    We offer expert parts advice and can help with any size project from restoring a classic boat to maintaining a fleet of boats.

    We carry a full line of parts from Hobie, Harken, Nacra, Ronstan, Robline, Alpha Rope, Pelican Rope, and Rooster.

    Navigating Murrays.com: The 2 best ways to find the parts you need are to use the Search and the Shop By Boat section.

    The Search is at the top of the page and is for searching key words like Fairlead, 40mm block, cheek block, clew block, downhaul, Nacra Bridle etc. 

    The Shop By Boat section can be found in the dropdown menu. Click on the Pars by Boat menue header and then select your boat under the manufacturer.  Once on your boat you can shop by category: Mast Parts, Rigging, Boom Parts, Front Crossbar Parts, Rudder Parts, Upgrades and Accessories.

    We have hyperlinked Illustrated parts lists for the Hobie 16 and the Hobie Wave on their shop by boat pages.

     

     

    3138 products
    The Hobie 16 and 14 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn’t absorb water the way carpet does, so it dries quickly!

Includes​ four 4" x 40" strips - covers both sidebars.

Compare to Hobie Cat® Rail Rug #1671BLK.
    The Hobie 16 and 14 Surefoot EVA Deck Grip Kit features 3m peel and stick backing on cut-diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span.  EVA is a lightweight foam doesn’t absorb water the way carpet does, so it dries quickly!

Includes​ four 4" x 40" strips - covers both sidebars.

Compare to Hobie Cat® Rail Rug #1671BLK.
    Black Blue Grey Red
    H14/16 SUREFOOT EVA KIT
    Murrays Sports
    $75.00
    Dacron Spun Braid 5/16

The Dacron Spun Braid 5/16 is very low-stretch and has a soft, fuzzy surface that offers excellent grip and make it easy on the hands. Ideal for use as a jib or spin sheet. 100% polyester braided core with a spun polyester braided cover. Sold per foot. Spools are 600′. Dacron Spun Braid is a very soft and durable line at an economical price. If you are interested in a premium sheeting line we recommend Robline Racing sheet Pro.

Use this page to order product numbers 39-05
    White Black Blue Red
    5/16" DACRON SPUN BRAID 8MM
    Robline
    from $0.80
    Sale
    BIG DRYER SAIL & BOOM BAG
    Murrays Sports
    Sale price $65.00 Regular price $85.00 Save $20
    Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head

Murrays Part# 21-0634



Solid stainless steel bow shackle has 3/16" diameter pin. 

UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
    Ronstan bow shackle measurements
    RONSTAN 3/16" BOW SHACKLE
    Ronstan
    $8.00
    Murrays Part# 001-4045
Hobie 18 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer.

To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18.

Compare to Hobie Cat® #1132 (bearing 60110000 and Teflon™ washer).
    Hobie 18 mast bearing 60110000 and 1132
    HOBIE 18 MAST BEARING KIT
    Murrays Sports
    $19.99
    H17/18/20/21/Wave and Getaway
Rudder Cam Kit


Murrays Part# 001-3550



The Rudder Cam Kit: H17, H18, H20, H21, Wave, & Getaway are replacement rudder cams which help keep your Hobie’s rudder lock-down mechanism functioning properly. This kit includes sister screws to install the cams, making it easier to replace the cams. Purchase the complete kit if your boat has the stock flare pins; or you can purchase just the cams (#50-10480000 each) if your boat already has sister screws.
    H-17/18/20/21/WAVE AND GETAWAY RUDDER CAM KIT
    Murrays Sports
    $59.00
    Hobie Halyard - Downhaul Cheek Block - 20710000
Murrays Part# 25-3340
The plastic sheave degrades and breaks on older Hobie® 16 downhaul cheek blocks and the entire block must be replaced. Also fits Sol Cat 18. Hole spacing 1/2" on center from side to side; 2-3/4" on center from end to end.
To install, use four #19-5031 6-4 rivets and four #19-5020 sealing casings.
Hobie Cat® Part# 20710000.
    HOBIE CHEEK BLOCK - 20710000
    Hobie
    $25.00
    H14/16 Rudder Pins Stainless Steel

Murrays Part# 001-2269




Weight-saving, hollow stainless rudder pins for Hobie® 14 or Hobie® 16 with stronger .065" wall provide reduced wear and the best long-term fit. This kit includes one pair of 3/8" x 8" rudder pins with cotter pins.

New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be diff
    H-14/16 RUDDER PINS PR (STAINLESS)
    Murrays Sports
    $35.00
    Mast Step Pin Wave/Getaway .25 x 2" Detent
Murrays Part# 50-8020451
Replacement mast step pin / mast hinge pin for a Hobie Wave and Getaway. 1/4" x 2" detent pin.  
Hobie part # 8020451
    MAST STEP DETENT PIN .25x2"
    Hobie
    $7.99
    Murrays PN 001-0053

The Murrays Rudder Stiffening Spacer is a 2" diameter spacer for use on Hobie, Nacra and Prindle catamarans to eliminate excessive clearances between rudders and castings which cause rudder slop, side to side wobble, and thwart rudder alignment. A kit with spacers and nuts is also available (#01-2053).  The Murrays Rudder Stiffening Spacer are quite thin so that you can achieve a perfect fit. Standard kits come with 8 spacers.
    RUDDER STIFFENING SPACER
    Murrays Sports
    $0.75
    Powerstick_carbon Hobie tiller extension
    Powerstick carbon tiller extension - Hobie, Nacra, Prindle, Dart, G-Cat, Sol Cat
    Black Blue Red Orange
    POWERSTICK TELESCOPING CARBON TILLER EXTENSION 62-115" - YOKE
    Murrays Sports
    from $315.00
    This 1.5" mast ball is for all post-1983 Nacra catamarans. Ball measures 1-1/2" diameter with a 9/16" hole.

Fits on the 56-2507 Nacra mast support rod.

There is also a 1-1/4" ball for the pre-1983 Nacra sailboats.

Nacra Sailing Factory item# 2504, 30338 and 30062
    Nacra Mast Ball 1.5" (Nylon)

Murrays Part# 56-2504

This larger mast ball for post-1983 Nacras. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole.

Fits on the 56-2507 Nacra mast support rod.

There is also a 1-1/4" ball for the older Nacras.

Nacra Sailing Factory item# 30338 and 30062
    NACRA MAST BALL 1.5"
    NACRA
    $35.00
    Downhaul Cleat with Screws

Murrays Part# 001-1020



The Downhaul Cleat Kit is for mounting in mast track (such as Hobie 16) and includes cleat, screws and channel inserts. Center-to-center hole spacing is 1-1/8". We have another kit for the halyard cleats on the side of the mast that includes rivets.
    DOWNHAUL CLEAT WITH SCREWS
    Murrays Sports
    $12.00
    Sale
    ​​Murrays Rudder Covers for Hobies

The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing.

The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover.

Unit: Pair

Made in the U.S.A.

Compatibility: Fits all Hobie rudders except the H21SE (Special
    ​​Murrays Rudder Covers for Hobies

The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing.

The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover.

Unit: Pair

Made in the U.S.A.

Compatibility: Fits all Hobie rudders except the H21SE (Special
    Red Grey
    MURRAYS HOBIE RUDDER COVER
    Murrays Sports
    Sale price $75.00 Regular price $99.00 Save $24
    Sealed Stainless Steel 3/16" x 3/8"
Pan Head Rivet
Murrays Part# 19-5032S
Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed.
Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified:
Hobie 14 (2) or 16 (4) mast head
Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4)
Hobie 14/16
    RIVET CCP SEALED 6-6 (3/16 X 3/8)
    Misc
    $1.30
    The Murrays Pins & Rings Kit: Hobie Wave + Getaway includes the most often used spare clevis pins and split rings for the Hobie Wave and Hobie Getaway. Compare to Hobie Part # 30302
    WAVE AND GETAWAY PINS & RINGS KIT
    Murrays Sports
    $22.99
    Hobie 16 main halyard for all aluminum masts. Hobie part number 20651011
    Hobie 16 Main Halyard with Shackle is a wire halyard for the all-aluminum mast (no Comp-Tip) Hobie 16 and is used to raise the main sail. Compare to Hobie Cat® #20651011
    H-16 MAIN HALYARD NON-COMPTIP
    Murrays Sports
    $69.95
    Hobie Shroud Anchor Pin Hobie 16, 17 and 18. 20100000 20100010
    HOBIE SHROUD ANCHOR PIN 20100000
    Murrays Sports
    $39.99
    H16 and Sol Cat Jib Hank

Hobie part number 22090001

Hobie factory jib hank attaches the jib to the forestay of a Hobie 16 or Sol Cat
    H-16/SOL CAT JIB HANK
    Hobie
    $3.99
    Hobie Trampoline Lacing Line Kit: Hobie 14, Hobie 16, Hobie 18: low stretch line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking.
The kit contains three lengths of 3/16" 8-strand black low-stretch line (one piece 33', two pieces 15') and lacing instructions.
This kit will lace all factory and most aftermarket trampolines.
    H-14/16/18 LOW STRETCH TRAMPOLINE LACING LINE KIT
    Murrays Sports
    $31.00
    Sale
    Magic Marine Pro Harness

The Magic Marine Pro Racing Harness is an ideal choice for the active sailor with great back support and a low bulk profile. A quick release hook with subtle features like a shoulder strap release, covered buckles, neoprene leg straps, and a 1000D Cordura seat make this harness comfortable and dependable for long days on the wire. This is currently one of the best choices for value and function.
    MAGIC MARINE PRO HARNESS
    Magic Marine
    Sale price $215.00 Regular price $245.00 Save $30
    Getaway Main Halyard

Murrays Part# 002-0973-60

The Murrays Hobie Getaway main halyard for is constructed to the current factory specs. It has a long rope section and a shorter wire section with a stopper and halyard shackle. The rope section is easy on the hands and prevents electrical current from traveling down the mast in the event of an electrical wire contact. 
Compare to Hobie part number 37651001
    GETAWAY MAIN HALYARD
    Murrays Sports
    $115.00
    Replacement sheave for mast head on Nacra 5.0, 5.2, 5.5, 5.7, 5.8, 6.0, 18 Square, Prindle 16 and Sol Cat 18 (cats that use a wire halyard). UV-resistant acetal material provides high strength and resistance to impact and wear, as well as excellent low friction properties for bearing applications.
    RONSTAN SHEAVE: P16 AND NACRA MAST HEAD
    Ronstan
    $6.12
    Hobie 18 Mast Base Hinge casting
60650011
    H-18 MAST BASE HINGE
    Murrays Sports
    $125.00
    The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by A Fleet Racers looking for a lighter more economic alternative. Murrays helped produce them and here they are! Same diameter, same length, just lighter material and a longer grip compared to the Hobie fiberglass tiller extension.

5/8" diameter black fiberglass tube
Hobie yoke base, same as the Hobie version
16" grip on the top

Weight: 3/4 lb.

Compare to Hobie 20550001
    The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by A Fleet Racers looking for a lighter more economic alternative. Murrays helped produce them and here they are! Same diameter, same length, just lighter material and a longer grip compared to the Hobie fiberglass tiller extension.

5/8" diameter black fiberglass tube
Hobie yoke base, same as the Hobie version
16" grip on the top

Weight: 3/4 lb.

Compare to Hobie 20550001
    MURRAYS 84" FIBERGLASS TILLER EXTENSION
    Murrays Sports
    $139.00
    Downhaul Kit: H14/16
Murrays Part# 001-1028
This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast.

This is a fantastic economical and simple solution for the recreational sailor.

Hobie part number 2081
    Downhaul Kit: H14/16

Murrays Part# 001-1028


This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast.

This is a fantastic economical and simple solution for the recreational sailor.

Hobie part number 2081
    H-14/16 DOWNHAUL KIT
    Murrays Sports
    $39.00
    Drain Plug with Plastic Base

Murrays Part# 001-0051

This lightweight and inexpensive drain plug features a molded recess in the molded nylon base that traps sealant (sold separately) in place, providing a more watertight seal. Gasket included.
    DRAIN PLUG WITH PLASTIC BASE
    Sea Dog
    $6.00
    Mast Bearing Half Round

Murrays Part# 56-2007



Half-round mast bearing for all Prindle mast steps.

Nacra Sailing factory item# 30964
    PRINDLE MAST BEARING HALF ROUND
    NACRA
    $27.00
    Downhaul Kit: 6:1 Hobie 14/16

Murrays Part# 007-2089

This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050).

Hobie Part# 2089
    Downhaul Kit: 6:1 Hobie 14/16


Murrays Part# 007-2089

This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050).

Hobie Part# 2089
    H-14/16 6:1 DOWNHAUL KIT
    Murrays Sports
    $225.00
    The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail.
Compare to Hobie part number 38651001.
    WAVE MAIN HALYARD
    Murrays Sports
    $125.00
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    $19.99
    Hobie 16 spare parts kit, shackle tool, drain plugs, rudder pins, clevis pins and rings, 3/16" bow shackle, 1/4" bow shackle, batten tie strings, and 3 mast bearings. Pouch comes in assorted colors as available. Hobie #30305 and #30306.
    H-14/16 SPARE PARTS KIT:
    Murrays Sports
    $125.00
    Murrays Part# 001-7050
The gold standard for catamaran racing has been the Coffee Marine Bridle Fly or the Hobie STD bridle vane that was designed based on it. The red plastic vane is very sensitive to wind shifts and easily mounts to the front of a Hobie 16, 14, Wave and all the Prindle Catamarans. With an adapter it can be mounted to any of the Hobiecat sailboats that use a furling drum. To start out, we are offering the standard length which extends about 13" and
Hobie part number 7703
    COFFEE MARINE BRIDLE VANE
    Murrays Sports
    $40.99
    Sale
    Magic Marine Smart Harness
The Magic Marine Smart Harness is a great minimal trapeze harness for everyone from beginners and casual sailors, to athletes who want a light harness that does not impede movement. The Smart harness is very comfortable and has an adjustable back support, pre-shaped shoulder straps, and leg straps that feature neoprene padding. Top it all off with a quick-release hook for added safety and peace of mind.
    MAGIC MARINE SMART HARNESS X-SMALL
    Magic Marine
    Sale price $175.00 Regular price $195.00 Save $20
    H14/16/18 Dyneema Race Tramp Lace Kit

Murray Part# 001-2242-1

Tramp Lace Kit H14 H16 H18 - Dyneema Race Kit uses Dyneema® which is the best choice for racers or other sailors looking for the ultimate in strength, light weight, and very low stretch characteristics in their tramp line lacing. Dyneema® has excellent ultraviolet and abrasion-resistance properties for longevity.
    H-14/16/18 DYNEEMA RACE TRAMP LACE KIT
    Murrays Sports
    $45.00
    Out of Stock
    Carbine Hook (Plastic)

A quick connection of trapeze shock cord to height control adjustment. 2-1/4" long. Compare to Hobie Cat® #2101.
    PLASTIC CARBINE HOOK
    Murrays Sports
    $1.95
    Hobie Wave rigging kit, 2 shrouds, 2 bridles and a forestay
    H WAVE RIGGING KIT
    Murrays Sports
    $175.00
    Hobie factory replacement retainer clip for Hobie 20-style tiller connector and adjuster kit (#07-1953). TILLER CONNECTION RETAINER CLIP - HOBIE 20. 40590000 MURRAYS.COM - IN STOCK
    Hobie 1953 tiller connection kit - new style
    H-20 TILLER CONNECTOR RETAINER CLIP
    Hobie
    $5.99
    Mast Ball H20/21/Getaway

Hobie part number 30110001

Hobie factory replacement mast ball for Hobie 20, Hobie 21 and Hobie Getaway. Ball measures 1-1/2" diameter with a 5/8" hole.
    H-20/21/GETAWAY MAST BALL
    Hobie
    $29.99
    6" Access Port with Lip

Murrays Part# 001-4210WH

The 6" Access Port with Lip is standard on the Hobie 18 and newer Prindle cats and it is an excellent upgrade for older Prindles. Ports can be installed on any flat deck, including kayaks, where there is 8-1/2" of flat surface available. These ports come with the inner lip so they are compatible with the 6"cat bag. Does not include hardware, hardware options shown in the related items section below.

White port is Murrays #01-4210WH. Compare to Hobie Cat® #
    6" ACCESS PORT WITH LIP
    Sea Dog
    $24.50
    Recently viewed