Murrays Marine - Catamaran specialists

All Sailing Parts

3138 products

    Murrays Sports is your best one stop shop for beach catamaran parts and accessories.  We stock both OEM and aftermarket parts for Hobie Cat Catamarans, Nacra Catamarans, and Prindle Catamarans.  We also have parts for Dart, Sol-Cat, G-Cat, Sabot and O'Pen Skiff Sailboats.

    We manufacture many OEM parts for these boats and have a full rigging shop onsite.  We make most of our rigging orders and ship within 24 hours of being ordered.

    Murrays has kits to make your life easier. From Rigging sets, Line Sets, Rudder locking kits, Rudder cam kits, Mast hinge kits, spare parts kits, rudder rebuild kits, cat righting kits, pins and rings kits and more.

    We manufacture many hard to find parts and source parts as needed when the OEM manufacturers discontinue items.

    Murrays has the largest selection of tiller extensions available with aluminum, fiberglass and carbon version s available in fixed length and adjustable length hiking sticks.

    We make 3 generations of Hobie 16 rigging and can help you get what you need for your boat.

    Custom rigging - Murrays can handle custom rigging requests from 3/32, 5/32 and 1/8" wire.  We use top quality 316 stainless wire for the best longevity.  We use professional grade tools and have experienced craftsmen with years of experience handling the rigging.

    Email us lengths, wire type and end pieces for a custom rigging quote.  Send quote requests to info(at)murrays.com.  Use the @ symbol in our email address instead of (at).  If we post the address we get even more spam.

    We offer expert parts advice and can help with any size project from restoring a classic boat to maintaining a fleet of boats.

    We carry a full line of parts from Hobie, Harken, Nacra, Ronstan, Robline, Alpha Rope, Pelican Rope, and Rooster.

    Navigating Murrays.com: The 2 best ways to find the parts you need are to use the Search and the Shop By Boat section.

    The Search is at the top of the page and is for searching key words like Fairlead, 40mm block, cheek block, clew block, downhaul, Nacra Bridle etc. 

    The Shop By Boat section can be found in the dropdown menu. Click on the Pars by Boat menue header and then select your boat under the manufacturer.  Once on your boat you can shop by category: Mast Parts, Rigging, Boom Parts, Front Crossbar Parts, Rudder Parts, Upgrades and Accessories.

    We have hyperlinked Illustrated parts lists for the Hobie 16 and the Hobie Wave on their shop by boat pages.

     

     

    3138 products
    TIGER LOW FORESTAY ROLLER FURLING 5/32- BLACK
    Murrays Sports
    $90.00
    Tiger Shroud 5/32" Roller Swaged Black Wire

Murrays Part# 002-6005-12

Single black shroud for Hobie® Tiger is hydraulically swaged to be clean and strong. Constructed to factory specifications.
Hobie® Part# 70792011
    TIGER SHROUD 5/32" ROLLER SWAGED BLACK WIRE
    Murrays Sports
    $95.00
    SHROUD TENSIONER
    SHROUD TENSIONER/DE-TENSIONER
    Misc
    $82.00
    Screw RHMS #10-32 X 3/4
Stainless Steel Slot Head
Murrays Part# 19-2912
Stainless steel slotted round head #10-32 x 3/4" machine screw is used on windsurfing fins.
    SCREW RHMS #10-32 X 3/4 (SS)
    Misc
    $0.34
    RONSTAN OPEN V-CLEAT FOR 3-6MM LINE
    Ronstan
    $9.35
    Ring: 1/4 X 2 Diameter
(Stainless Steel)

Murrays Part# 25-3050

1/4" x 2" stainless ring can be used for Prindle-style jib halyards.
    RING: 1/4 X 2" DIAMETER (SS)
    Murrays Sports
    $5.00
    Out of Stock
    Power Righting System I

Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    $299.00
    Plug for Aluminum Stick

Murrays Part# 001-0064



15/16"Outer Dimension plug fits the Murrays Aluminum Hiking Stick.
    PLUG FOR ALUMINUM STICK
    Murrays Sports
    $6.00
    Sale
    Prindle 19 Diamond Wire with Turnbuckle

Murrays Part# 002-2494-20

Diamond wire with turnbuckle for Prindle 19 is constructed to factory specifications.


Prindle part# 9879
    PRINDLE 19 DIAMOND WIRE WITH TURNBUCKLE
    Murrays Sports
    Sale price $125.00 Regular price $150.00 Save $25
    P19 Upper Forestay 5/32" Bare Wire

Murrays Part# 002-2435-00



Bare upper forestay for Prindle 19 is constructed to factory specifications.
    PRINDLE 19 UPPER FORESTAY 5/32" BARE WIRE
    Murrays Sports
    $44.00
    Prindle bridle wire
    PRINDLE 19 BRIDLE 5/32 BK
    Murrays Sports
    $64.00
    P18 Bridle 5/32" Black
Murrays Part# 002-2315-02
One black bridle for Prindle 18 is constructed to factory specifications.
    PRINDLE 18 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    $40.00
    Nut Hex MS #8-32 (White Nylon)
Murrays Part# 19-2020WH
White nylon #8-32 nut used for installation of ports.
    NUT HEX MS #8-32 (WH NYLON)
    Misc
    $0.25
    N-5.2 BRIDLE 5/32 BLACK WIRE
    Murrays Sports
    $80.00
    N5.0 Shroud 5/32" Black Wire Roller Swaged

Murrays Part# 002-4105-12

Single black shroud for Nacra 5.0 is constructed of 5/32" wire and is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    N-5.0 SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    $90.00
    N-5.0 BRIDLE 5/32- BLACK
    Murrays Sports
    $84.00
    H14/16 Mast Bearing (Pack of 100)

Murrays Part# 001-2042



Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips.
    H14/16 MAST BEARING (100-PKG)
    Murrays Sports
    $299.00
    KISME "IT" TRAVELER CAR (PR)
    Misc
    $30.00
    KEY-BALL CONNECTOR
    Murrays Sports
    $33.00
    Nacra Inter 17 Bridle 1/8" Black Wire

Murrays Part# 002-5214-12
    NACRA INTER 17 BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    $55.00
    Nacra Inter 20 Bridle 5/32"
Black Wire

Murrays Part# 002-5415-22

Single black bridle for Inter 20 is constructed to factory specifications. You must select the type of jib your boat has so that the bridle's length and fittings will be correct for your boat.
    NACRA INTER 20 BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    $80.00
    Inter 18 Diamond Wire without Turnbuckle

Murrays Part# 002-5394-20

Diamond wire without turnbuckle for Inter 18 is constructed to factory specifications. Includes both sides.
    NACRA INTER 18 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    $110.00
    Nacra Inter 18 Bridle 5/32" Black Wire

Murrays Part# 002-5315-22

Single black bridle for Inter 18 is constructed of black-coated, 5/32" 1x19 wire to factory specifications.
    NACRA INTER 18 BRIDLE 5/32"BLACK WIRE
    Murrays Sports
    $80.00
    Harken Micro Wedge Kit

Murrays Part# 297


Micro cam wedge kit fits #28-0468 and #28-0471 Harken cam cleats. Weighs .16 oz.; 1-1/16 " fastener spacing.

Harken Part#297 Hobie part# H297
    HARKEN MICRO WEDGE KIT
    Harken
    $5.99
    Harken Standard Wedge Kit

Murrays Part# 28-0145

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting.

Harken 15-degree wedge kit fits Harken 150 (#28-0150) and 365 Cam-Matics (#28-0365). 1-1/2" fastener spacing. 

Harken Part#145

Hobie Part# H145 
    HARKEN STANDARD WEDGE KIT
    Harken
    $7.61
    Harken 57mm Triple Ratchamatic Block-Swivel, Cam Cleat

Murrays Part# 28-2629

The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase. Shifting between ratchet and light air modes is seamless. Unloaded the sheet runs freely during mark roundings and jibes. Ratchet engagement may be adjusted to a higher or lower load according to strength and sailing style.
    Harken Hobie 16 main sheet base block
    HARKEN 57MM TRIPLE RATCHAMATIC BLOCK-SWIVEL, CAM CLEAT
    Harken
    $348.80
    Harken 57mm Triple Block-Swivel

Murrays Part# 28-2604

Harken's low-friction Carbo AirBlock® is lightweight, strong, reliable and affordable. It has an enormous working range, with a very high working load for safe, easy trimming. It has a higher working load than standard blocks, even though it is lighter in weight! Use with #28-2629 base block for a 6:1 carbo low-profile mainsheet system.

Can be used as top block for H16 6:1 mainsheet system or a light air H18 6:1 mainsheet system.
    HARKEN 57MM TRIPLE BLOCK-SWIVEL
    Harken
    $170.89
    Harken 29mm Double Block - Swivel
Murrays Part# 28-0342
This compact double block is extremely strong and features a U-Lock to hold the swivel in front/side position, or to let it spin freely. Use this miniature Carbo as a mainsheet block on small dinghies such as the Optimist, to increase downhaul, or for low-friction control blocks on any size boat.
    HARKEN 29mm DOUBLE BLOCK-SWIVEL
    Harken
    $53.42
    Harken 57mm Carbo Ratchamatic 12:1 Low-Profile Mainsheet System
Murrays Part# 28-121
The Harken 57mm Carbo Ratchamatic 12:1 Low-Profile Mainsheet System is a Light weight, low profile and very strong. These Carbo AirBlocks® have enormous working range, with a higher working load than standard blocks, even though they are lighter in weight! The Carbo Ratchmatic® is a load-sensing ratchet block that rolls freely in both directions under low loads, and automatically engages the ratchet as loads increase.
    HARKEN 57mm CARBO 12:1 SYSTEM
    Harken
    $645.00
    H18SX Forestay 5/32" Black Wire

Murrays Part# 002-0645-12

Black forestay for Hobie® 18SX is constructed to factory specifications.

Compare to Hobie Cat® Part# 68814501
    H-18SX FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    $115.00
    H18SX Diamond Wire without Turnbuckle

Murrays Part# 002-0694-20

Diamond wire for Hobie® 18SX is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included.

Compare to Hobie Cat® Part# 68750001
    H-18SX DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    $110.00
    H18 Dimond Wire without Turnbuckle

Murrays Part# 002-0494-20




Diamond wire for one side of a Hobie® 18 is constructed with stainless fork, jib roller and left-hand threaded stud. Turnbuckle not included.

Please note: The diamond wire will be constructed with a stud that has left hand threads. Please contact Murrays if you have an older Hobie® 18, as right hand threads may be required.

The change to the left handed thread happened some time in the early 80's.
    H-18 DIAMOND WITHOUT TURNBUCKLE
    Murrays Sports
    $108.00
    H17 Sport Forestay 5/32"

Murrays Part# 002-0345-32



Black forestay for Hobie® 17 Sport is constructed to factory specifications.

Compare to Hobie Part# 52812001
    H-17 SPORT FORESTAY 5/32-BLACK WIRE
    Murrays Sports
    $99.00
    H-17 SPORT BRIDLE 5/32 BK​

Murrays PN 002-0315-22​


One bridle for the Hobie® 17 Sport (with jib) is constructed of black-coated, 5/32" 1x19 to factory specifications.

Compare to Hobie 52500201.
    H-17 SPORT BRIDLE 5/32" BLACK WIRE
    Murrays Sports
    $80.00
    H14 Turbo Upper Forestay with Swivel

Murrays Part# 002-0134-01




Upper forestay with swivel for Hobie® 14 Turbo is constructed to factory specifications.

Turbo refers to the Hobie Factory Version that features a Hobie Roller furling drum, bridles connect to the drum with forks, and an under tramp jib block wire.

Compare to Hobie Cat® #10810010
    H-14 TURBO UPPER FORESTAY WITH SWIVEL
    Murrays Sports
    $105.00
    Fast Set Epoxy

Murrays Part# 000-0002-1



Some sailors like to "caramel-coat" the cork ball handle of the hiking stick with epoxy to make the cork ball last longer.
    FAST SET EPOXY
    Misc
    $2.25
    Out of Stock
    Fast Eye Snap Brass 2-1/8"

Murrays Part# 27-136120

2-1/8" brass snap hook is convenient, but should not be used in critical, high-load situations.
    FAST EYE SNAP BRASS 2-1/8"
    Misc
    $12.00
    Clevis Pin Headless 3/16 X 1-1/2
Murrays Part# 22-9811
Stainless steel mast step hinge pin for Hobie® 16 has a hole on each end. Measures 3/16" diameter by 1-1/2" long.
Part of the Hobie mast step link kit 21380001
    HEADLESS CLEVIS PIN 3/16 X 2-1/8"
    Misc
    $3.95
    Bolt Hex Head 5/16-18 X 4.50" (Stainless Steel)

Murrays Part# 19-2237

Stainless steel hex head bolt for Prindle mast rotation control arm. Use #19-2520 nylock nut.

This bolt is a replacement for item #56-F110

Comparable to Hobie Part# 8040211
    BOLT HEX HEAD 5/16-18 X 4.50" SS
    Misc
    $2.90
    Bolt Hex Head 1/4-20 X 3.5"
Stainless Steel

Murrays Part# 19-2224

Stainless steel hex head bolt measures 1/4-20 x 3-1/2"

Pylon Bolt for newer H16

Hobie Part# 8040361
    BOLT 1/4-20 X 3.5" (SS)
    Misc
    $2.15
    Recently viewed