Murrays Marine - Catamaran specialists

All

3171 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3171 products
    Out of Stock
    TORQEEDO SPARE PROPELLER HIGH-SPEED 2.0/4.0 FOR CRUISE
    Torqeedo
    TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001
    Hobie 1953 tiller connection kit - new style
    TILLER ARM END CAP SWIVEL
    Hobie
    TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock
    HOBIE TILLER ARM INSERT
    Hobie
    Ronstan Toggle Pin with Lanyard 1/4 X 3/4" Murrays Part# 21-1153L Stainless steel 1/4" diameter toggle pin replaces 3/4" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 3/4"
    Ronstan
    Spreader Bar Screw (Fine Threads) Murrays Part# 56-9851 Black, fine-threaded screw (20/inch) fits newer Nacra cats, but may require fine-threaded forward spreader bar (#56-9844) and aft spreader bar (#56-9843) to ensure compatibility with older Nacras and Prindle 18, 18.2 and 19. Nacra Sailing factory item# 30337
    NACRA SPREADER BAR SCREW (FINE THREADS)
    NACRA
    Screw Socket Head 5/16-24 x 2" Murrays Part# 50-8031821 Hobie® factory replacement 5/16-24 x 2" socket head stud. Used in Hobie 18SX wing mounting kit. Hobie Part# 8031821
    SOCKET HEAD SCREW 5/16-24x2"
    Hobie
    Screw H20 Connector 10-24 X .25" Murrays Part# 50-8032401 Hobie® factory replacement screw for Hobie 20 tiller connector. Stainless steel 10-24 x 1/4" pan-head machine screw with Phillips head. Hobie Part# 8032401
    H-20 CONNECTOR SCREW 10X24X.25"
    Hobie
    The Sheaveless Ronstan Shock Block 10mm The obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.
    RONSTAN 10MM SHOCK BLOCK 3/8"-RED
    Ronstan
    Out of Stock
    H16 Rudder Casting Cam Pin 1/4" Murrays Part# 50-10470000 Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    Out of Stock
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Prindle Rudder Arm Slotted P15/16/18 Murrays Part# 56-5004 22.5" Anodized slotted rudder arm fits all Prindle 15, 16 and 18 Nacra Sailing factory item #30430
    PRINDLE SLOTTED RUDDER ARM
    NACRA
    Roller Furler Darby Ring (Large) Murrays Part# 50-8062511 Hobie® factory replacement large darby ring for roller furler. Hobie Part# 8062511
    ROLLER FURLER DARBY RING (LARGE)
    Hobie
    Rig Tension Gauge Deluxe Murrays Part# 33-1795 The Deluxe Rig Tension Gauge is designed to provide an accurate measurement of the tension in standing rigging wire with accurate and repeatable tuning. This product is built by Loose, and is also known as a Loose Gauge. The Loose gauge has been a standard for performance tuning for decades. The Standard model #33-1795 gauges 3/32", 1/8" and 5/32" cable tension adjustment. The Metric model #33-1795M is for cable sizes 2.5mm, 3mm and 4mm
    RIG TENSION GAUGE DELUXE-STANDARD
    Misc
    PRINDLE 18.2/19 OWNERS MANUAL
    Murrays Sports
    Nut Nylock 5/16-18 Low Profile Murrays Part# 50-8050331 Hobie® factory replacement low-profile 5/16-18 nylock nut.  Fits EZ Loc Upper and Lower Rudder Housing Hobie Bravo, Getaway and Wave. Hobie Part# 8050331
    NUT NYLOCK 5/16"-18 LOW PRO
    Hobie
    Nacra Pivmatic Assembly with Pin: Aluminum Cleat Murrays Part# 56-0266-1 Positive, reliable and easy to install. Nacra rudders automatically kick up on contact with submerged objects with this rudder release fitting. This upgraded Pivmatic assembly has a heavy-duty aluminum cleat that is not as susceptible to wear and stripping as plastic. Complete kit for one side as shown.
    NACRA PIVMATIC ASSEMLY WITH PIN: ALUMINUM CLEAT
    NACRA
    Out of Stock
    Carbon Mast Head Murrays Part# 56-6602CAR Nacra mast head for a carbon mast. Nacra Part# 6602Car
    NACRA CARBON MAST HEAD
    NACRA
    H17 Mast Base Washer Murrays Part# 50-52411001 Replacement washer for Hobie 17 mast base assembly. Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    HIKING STRAP WEBBING 2" BLACK
    Misc
    HEAVY DUTY HAND RIVET TOOL
    HP
    H16 Jib Car Slide Only with Wheels Hobie factory jib car slide for Hobie 16 with integrated jib track (standard equipment since late 2005). Hobie part number 25243003
    H-16 JIB CAR SLIDE ONLY WITH WHEELS
    Hobie
    Out of Stock
    H14 Black Mesh Trampoline Murrays Part# 50-10970055 The H14 black mesh trampoline is a trampoline for a Hobie 14. It is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Order lacing separately. Hobie Part# 10970055
    H-14 BLACK MESH TRAMPOLINE
    Hobie
    Dolphin Striker Rod Washer Murrays Part# 56-F152 Washer for Prindle and Nacra dolphin striker rods. Performance Sports factory item# F152
    NACRA/PRINDLE DOLPHIN STRIKER ROD WASHER
    NACRA
    Dolphin Sticker Rod Nut Murrays Part# 56-F151 9/16" stainless nut for Nacra dolphin striker mast support rod. Used on boats built after 1983. Before threading nut onto rod, use grease or anti-seize on threads of rod to prevent thread galling. Performance Sports factory item #F151.
    NACRA DOLPHIN STRIKER ROD NUT
    NACRA
    Dolphin Striker Casting Murrays Part# 56-2009 Performance Sports factory dolphin striker casting for all Prindle Cats
    Prindle part numbers 2505, 2009 and 2009C
    PRINDLE DOLPHIN STRIKER CASTING
    NACRA
    Out of Stock
    Bolt Hex 5/16-18 X 1" Murrays Part# 50-8040171 Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20. Hobie Part# 8040171
    BOLT HEX 5/16-18 X 1"
    Hobie
    Beam Strap All N5.0 and 5.7 Murrays Part# 56-3510 Beam strap for front crossbars on all Nacra 5.0 and 5.7 models and rear crossbars on Nacra 5.0, 5.7 and 6.0. Nacra Sailing factory item #30095.
    NACRA FRONT BEAM STRAP
    Murrays Sports
    Windsurf Adjustable Outhaul Kit Murrays Part# 001-9520 Racers and recreational windsurf sailors can adjust outhaul tension "on the fly" for maximum power or speed: Low gear: Loosen outhaul tension to "power-up" to get going, even in light wind. Shift to drive: Tighten outhaul to flatten sail for more speed as you get onto a plane and/or more efficiency when heading upwind. Adjust the outhaul (sail shape) from either side, at any time.
    WINDSURF ADJUSTABLE OUTHAUL KIT
    Murrays Sports
    Cat Trax Washer & Cotter Pin Kit Murrays Part# 13-1401-7 Kit includes: Replacement washers and cotter pins for two Cat Trax beach wheels.
    CAT TRAX WASHER & COTTER PIN KIT
    Cat Trax
    WASHER #8 (WH NYLON) Murrays PN 19-4006WH White nylon washer is used for installation of access ports (hatches).
    WASHER #8 WHITE NYLON
    Misc
    TURNBUCKLE COMPLETE 5/32"
    Misc
    Tiger Diamond Wire Double without Turnbuckle Murrays Part# 002-6095-20 Double diamond wire without turnbuckle for Hobie® Tiger is constructed to factory specifications.
    TIGER DIAMOND WIRE DOUBLE WITHOUT TURNBUCKLE
    Murrays Sports
    Swivel with Bulls-Eye (No Cleat) Murrays Part# 25-3011 This item includes the swivel with bullseye, but not the cleat. Swivel cam cleats (cleat sold separately) are ideal for main traveler control and up-release jib cleating systems. Order plastic base pads and fasteners separately.
    SWIVEL WITH BULLS-EYE (NO CLEAT)
    Murrays Sports
    Stand Up Spring Conical Light Murrays Part# 21-0319 This soft, conical spring is used for Harken bullet block (e.g. Hobie® 16 jib traveler car and Hobie® spinnaker pole blocks).
    STAND UP SPRING CONICAL LIGHT
    Murrays Sports
    Rudder Pins H17/18 (Nylon) Murrays Part# 001-4271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair).
    RUDDER PINS H-17/18 PR (NYLON)
    Murrays Sports
    RONSTAN OPEN V-CLEAT FOR 3-6MM LINE
    Ronstan
    Rivet AAP 6-4 (3/16 X 1/4) Murrays Part# 19-5011 A rivet gun is required for installation of this 3/16" x 1/4" aluminum pop rivet.
    RIVET AAP 6-4 (3/16 X 1/4)
    Misc
    Rivet AAP 6-10 (3/16 X 5/8) Murrays Part# 19-5014 A rivet gun is required for installation of this 3/16" x 5/8" aluminum pop rivet
    RIVET AAP 6-10 (3/16 X 5/8)
    Misc
    Out of Stock
    Power Righting System I Murrays Part# 13-4101
    POWER RIGHTING SYSTEM I
    Murrays Sports
    P19 Upper Forestay 5/32" Bare Wire Murrays Part# 002-2435-00 Bare upper forestay for Prindle 19 is constructed to factory specifications.
    PRINDLE 19 UPPER FORESTAY 5/32" BARE WIRE
    Murrays Sports
    Recently viewed