Murrays Marine - Catamaran specialists

All

3153 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3153 products
    Murrays 57mm Carbo 6:1 Mainsheet System Murrays Part# 28-61 The Murrays Harken 57mm Carbo 6:1 Mainsheet System is an improved low profile mainsheet system for Hobie 16.  By attaching a fairlead to the back side of the cleat mount the Murrays system does not need a becket on the lower block which makes the system more compact and gives sailors the ability to sheet in farther and or rake the mast back farther before having the mainsheet bottom out and go block to block.
    HARKEN 57MM CARBO 6:1 MAINSHEET SYSTEM
    Harken
    Out of Stock
    Mystic stealth harness - Grey/black - closeout - Murrays.com
    Mystic stealth harness - Black - closeout - Murrays.com
    MYSTIC STEALTH HARNESS - SMALL
    Mystic
    Save $200.99
    Hobie 18 TRAPEZE WIRE - WHITE 1473W, BLACK 1473B
    H-18/21SC DOUBLE TRAPEZE (4)
    Murrays Sports
    M8x30mm TITANIUM TORX BOLT
    Murrays Sports
    Hobie Wave Lower Pintle Murrays Part# 50-38101401 Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part # 38101401
    WAVE WAVE/GETAWAY LOWER PINTLE - PRE EZ LOC
    Hobie
    Out of Stock
    Rudder Blade EZ Lock With Indents Murrays Part# 50-20491000 Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems
    RUDDER BLADE EZ LOCK WITH INDENTS
    Hobie
    Low Stretch 8-Strand 1/8 Black Murrays Part# 39-2309BK The result of design technology combining low-stretch, high strength and chafe resistance into one rope. Similar to Prestretched, but its softer, less textured finish means less friction in multi-purchase systems. Made in the USA. Sold per foot. Spool: 250' (76.2m). Compare to white Hobie Cat® line #RH018WHT or RH112WHT. We recommend this line for use on batten ties and roller furling line, Prindle jib halyards and Prindle tramp lacing. This is
    1/8" LOW STRETCH 8-STRAND 3MM
    Pelican Rope
    Clevis Pin1/4 X 1" Murrays Part# 50-8020401 Hobie® factory replacement 1/4" x 1" clevis pin. Compare to Hobie Part Number 8020411 Applications: H18 / Hobie 18 SX Tiller Yoke Clevis Pin: 1
    CLEVIS PIN 1/4 X 1"
    Hobie
    1/2″ Hollow Braid Line Hobie righting line Hobie part number RL012BLU
    1/2" HOLLOW BRAID LINE
    Pelican Rope
    Ronstan Stainless Steel Long D Shackle, 1/4" Pin, Coined Head Murrays Part# 21-0623 This stainless steel long D-shackle has a 1/4" diameter pin. Great for adding replacing the clevis pin on your H18 bridles for a spinnaker project.
    RONSTAN STAINLESS STEEL LONG D SHACKLE, 1/4" PIN, COINED HEAD
    Ronstan
    Rivet MSP 6-10 3/16 X 5/8" PH Murrays Part# 19-5023 Rounded pan head 3/16" x 5/8" Monel rivet. Compare to Hobie Cat® Part# 8010121
    RIVET MSP 6-10 3/16 X 5/8" PH
    Hobie
    The Murrays Prindle 16 main halyard is made to factory specs. We use 316 stainless steal bare wire and thimbles. It also has a Ronstan Halyard Shackle with a captive pin so that it will not fall out when loosened. Prindle part number 9026
    PRINDLE 16 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    H14/16/17/18 Gudgeon Lower Murrays Part# 25-3352 The latest, strongest rudder gudgeon design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14, 16 and 17, order separate upper and lower gudgeons. For all other Hobie® cats with new-style castings, post 1986, order 4 for a complete set . Replacement for Hobie Part# 50101401
    Upper rudder gudgeon for the Hobie 14 and 16. This updated, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    H-14/16/17/18 LOWER GUDGEON
    Murrays Sports
    Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). Uses: This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Hobie 18 main traveler car  Prindle Part# 6004  Comparable to Hobie Cat® Part# 8020431
    1/4 X 1-3/8" Clevis Pin Murrays Part# 22-9804 Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Prindle Part# 6004 Comparable to Hobie Cat® Part# 8020431
    CLEVIS PIN 1/4 X 1-3/8"
    Misc
    H16 Mast Base Murrays Part# 50-20640011 The Hobie 16 Mast Base is the part that fits in the bottom of the mast and is attached to the mast with rivets. Works with all Hobie 16 sailboats. Attaches to bottom of Hobie 16 mast Use three (3) Part # 8010131 rivets to secure fitting Hobie Cat Part# 20640011
    H-16 MAST BASE
    Hobie
    Harken H16 Race 6:1 Main Sheet System Murrays Part# 28-61p The 6:1 Race Mainsheet System is a low profile mainsheet system is super light weight and allows for maximum mast rake. The base block is the 57mm Harken Carbo Ratchamatic from our regular 6:1 system with a 40mm carbo triple on the top. The Harken 57mm base block has a load sensing ratcheting system to help hold the line when it is under tension.
    HARKEN H-16 RACE 6:1 MAIN SHEET SYSTEM
    Harken
    Murrays Part# 001-1130 Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. We suggest purchasing Can't Miss Rings (#01-0124) to supply a handle down low when needed. Order shock cord separately
    Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. Show with can't miss rings and trap shock cord. Hobie part 1204
    HIGH-LOW TRAPEZE ADJUSTMENT KIT: NO CUT
    Murrays Sports
    Hobie 14 Trapeze Wires - Hobie Part Number - BLACK 1475B - WHITE 1475W
    H-14 TRAPEZE WIRES (2)
    Murrays Sports
    The super comfortable, compact design of the Rooster Diamond Overhead Buoyancy Vest features a high cut waist to allow unrestricted movement and easy access to a trapeze hook. The highly adjustable shoulder and waist straps ensures a great fit for different body shapes, while the recessed, neoprene-covered buckles removes the risk of snagging on ropes and rigging. Strong, rip-stop fabric ensures longevity and provides greater wear resistance with reflective panels for improved visibility. The front pocket i
    ROOSTER DIAMOND BUOYANCY VEST
    Rooster
    HOBIE 16 JIB TRAVELER CAR SHEAVE Replacement Hobie 16 Jib traveler car sheave. Hobie part number 20132030
    H16 JIB TRAVELER CAR SHEAVE
    Hobie
    Ronstan Single Block, Ferrule Murrays Part# 21-0469 This is the original clew block on most of the old Hobie cat Sailboats. This will work as a replacement jib clew block for Hobie® 14, 16 and 18 cats. Lightweight stainless block with ferrule has 1-1/8" x 5/8" sheave diameter, Delrin bearing and 1/2" line capacity. SWL: 950 lbs. This is a great option if you're looking to use a larger line diameter on your sheets or want the classic look.
    RONSTAN SINGLE BLOCK WITH FERRULE
    Ronstan
    Sale
    The Forward X-Over Sailing Helmet (Crossover helmet) has been developed with America's cup teams to offer the best protection and with higher impact protection to matching those of Skiing helmets. The Crossover is the perfect choice for Multi-activity sport riders wanting to use their helmet in a variety of sports including foiling and or downhill skiing.
    FORWARD X-OVER SAILING HELMET
    Forward Wip
    Save $80.99
    M8 T-Nuts: Titanium Hydrofoil Mast Track Inserts
    TITANIUM M8 T-NUT: HYDROFOIL MAST TRACK INSERTS
    Misc
    Jib Halyard "S" Hook Murrays Part# 56-9839 The Prindle Jib Halyard "S" Hook is a welded stainless "S" hook for Prindle-style jib halyards. Nacra Sailing factory item #30507. Performance sailing part# 9839 Nacra Sailing factory item# 30507
    PRINDLE JIB HALYARD "S" HOOK
    NACRA
    H16/18/Getaway Mast Tang Murrays Part# 50-20690000 Hobie® factory replacement mast tang for Hobie® 16, 18, Getaway and the 1995 and newer Hobie® 17. Use twelve 6-4 rivets (#19-5031) and twelve casings (#19-5020) for installation. Also known as a mast hound
    H-16/18/GETAWAY MAST TANG
    Hobie
    Mast Ball H17 Wave Murrays Part# 50-50212301 Hobie factory replacement mast ball for Hobie® 17 and Wave. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. This ball can also be glued for use on Trac 16.
    H-17/WAVE MAST BALL
    Hobie
    H16/18 Jib Halyard Block Assembly Murrays Part# 50-20240001 Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2". Hobie part# 20240001
    Hobie 16 forestay and jib halyard parts chart
    HOBIE 16/18 JIB HALYARD BLOCK ASSEMBLY
    Hobie
    DAKINE PRO FORM FOOTSTRAP
    Dakine
    RUDDER PIN SPRING CLIP: 3/8
    Misc
    Prindle Spare Parts Kit Murrays Part# 001-5221 Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, the Murrays Spare Parts Kit contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie line. Pouch comes in assorted colors as available.
    PRINDLE SPARE PARTS KIT
    Murrays Sports
    Ronstan 3/16 Twisted D Shackle Murrays Part# 21-0628 Stainless steel twisted D-shackle has a 3/16" pin.
    RONSTAN 3/16" TWISTED D SHACKLE
    Ronstan
    Sailors All Purpose Tool (SSI) Murrays Part# 001-0005 The sailor's all-purpose stainless tool is a wrench that fits nuts for 1/4" and 5/16" bolts and it's also a cam remover, screwdriver, bottle opener and shackle tool. It also helps with shackle pins and drain plugs. Hobie Cat® Part# 83103
    SAILORS ALL PURPOSE TOOL (SSI)
    Hobie
    H14/16 Upper Gudgeon Murrays Part# 25-3351 This latest, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie® 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    Upper rudder gudgeon for the Hobie 14 and 16. This updated, strongest design with welded sleeve bushings provides large, smooth bearing surfaces between rudder pins and gudgeons. Replace flared gudgeons with their sharp edges and point loading that can cause early rudder pin failure. For Hobie 14's, 16's and 17, order separate upper and lower gudgeons.  For all other Hobie® cats Part# 25-3352 for both gudgeons. Each This gudgeon is a replacement for item #50101301
    H-14/16 UPPER GUDGEON
    Murrays Sports
    Rope End Stop Murrays Part# 27-0199 This 1-1/8" diameter plastic ball has a 1/4" hole and comes in assorted colors as available. The hole on one end accommodates the stop knot.
    ROPE END STOP
    Misc
    Ronstan Curved Surface Base/Riser for Medium Cam Cleats Murrays Part# 21-5016 Ronstan riser/curved surface adapter fits medium C-Cleat and T-Cleat. Use on round surface such as mast or crossbar. Ronstan Part# RF5416
    RONSTAN CURVED SURFACE BASE/RISER FOR MEDIUM CAM CLEATS
    Ronstan
    Deluxe Quick Release Pin 1/4 X 1.5" Murrays Part# 18-4M150 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below. Quick pins are ideal for replacing clevis pins in areas that you would like to be able to quickly connect and disconnect. Uses: Hobie 18 mast hinge pin Compare to Hobie part# 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 802
    DELUXE QUICK RELEASE PIN 1/4 X 1.5"
    Misc
    HOBIE 18 POWER DOWNHAUL KIT - 5:1 Get powerful downhaul adjustment from any sailing position. This Class-legal, 5:1 downhaul kit for Hobie® 18 includes a space-saving bracket with becket, two Harken bullet cheek blocks, Harken pivoting exit block with micro cleat, Harken double bullet block, trim line, fasteners and instructions.
    H-18 5:1 POWER DOWNHAUL KIT
    Murrays Sports
    Hobie Aussie Halyard Ring Murrays Part# 007-3064 If you're having trouble raising or lowering your mainsail due to a faulty halyard ring and shackle, this upgrade will help. Welded ring and lanyard give you more positive control while hooking or unhooking the ring to the hook. Use on any boat that uses a hook at the mast head and a ring and shackle at the head of the sail. Personal preference dictates whether you choose this ring or the Murrays Aussie Ring (#01-4216). Hobie® Part# 3064
    HOBIE AUSSIE HALYARD RING
    Hobie
    Harken Traveler Car Bearing Loader
    HARKEN TRAVELER CAR BEARING LOADER
    Harken
    Harken 29mm Bullet Sheave Murrays Part# 28-0160 Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
    HARKEN 29MM BULLET SHEAVE
    Harken
    Recently viewed