All Sailing Parts

All Sailing Parts

2262 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2262 products

Sort

CUSTOM RIGGING BRIDLE WIRE

NACRA F20 CARBON DOUBLE TRAPEZE 3/32" BLACK WIRE

H18 Diamond Wire Complete

Murrays Part# 50-61750001

Replacement Hobie 18 diamond wire assembly, including the turnbuckle, diamond wire roller and end fittings.

RIGGING CUSTOM DIAMOND WIRE

EPO2 HOBIE CARBON RUDDER BLADE

H-14/WAVE EUROPEAN MAST BASE

Nacra Rudder Hold Down

Murrays Part# 56-30002

This part secures the lower rudder casting to the transom of most Nacra Catamarans. The small plate on both sterns which secures your lower rudder casting on the gudgeons, without it your rudders won't stay on all right.

Nacra Part# 30002

NACRA RUDDER HOLD DOWN

O'Pen Skiff 4.5m2 Rig Complete

Murrays Part# 65-108542

The rig includes a fully-battened, 4.5m² mono-film sail with mast pocket, similar to that of a windsurf sail. Rigged on an epoxy mast, the sail has been designed with an open leech to give sailors maximum control and performance in windy conditions. The Cunningham tackle (6 threads + cleat) associated with the boom vang / boom safety attachment, allows sailors to trim efficiently the tension of the sail.

O'PEN SKIFF 4.5M2 RIG COMPLETE

NACRA 17 MKII TRAMPOLINE OEM

Trampoline H20 Mesh 1-Piece-Black
Murrays Part# 30-3106Y
This aftermarket, one-piece, bias-cut, black mesh tramp for Hobie® 20 is not Hobie® Class-legal for racing. The tramp includes hiking straps, trapeze grommets, 16" by 24" Velcro pocket and webbing loops.

H-20 1 PIECE TRAMPOLINE-BLACK

NACRA 5.0 1 PIECE TRAMPOLINE-BLACK

Nacra Stern Support-XL

Murrays Part# 56-30972

The Nacra stern supports XL are specially designed for foiling boats.

The Nacra stern supports XL are designed to support your boat while standing on the beach. It prevents the hull from damage as the hull is lifted from the ground.

They are made out of polyethylene. Therefore the stern supports supports are light and weather resistant. the color doesn't show on the hulls and they are easy to maintain. Due to the material they will float and are flexible.

NACRA STERN SUPPORT-XL

HOBIE 16 GLOBAL EDITION

HOBIE WAVE SAILBOAT

Sunfish Mainsail-Multi Colored

Murrays Part# 68-64316

Classic Sunfish sails are recognized all over the world for their bright and fun colors.  Made by Sunfish Direct to be durable for many years of sailing.

Manufactured by Sunfish Direct
Traditional 6 panel design
Material: Material: 3.8 oz Dacron
Sail area: 75 square feet - 6.97 square meters
Luff: 13.25 feet
Leech: 14.25 feet
Foot: 13.25 feet
Includes a window for maximum visibility

SUNFISH MAINSAIL-MUTI COLORED

Laser Performance

Sunfish Boom Cap With Eye

Murrays Part# 68-90428

This plastic cap mounts to the outer end of the boom, providing a secure attachment point for the outhaul. The integrated eyelet allows for easy tie-off.

Features:
Includes groove pin for secure installation
Provides a strong and reliable outhaul attachment point
Durable plastic construction for long-lasting use
A necessary component for proper sail rigging and outhaul management.

SUNFISH BOOM CAP WITH EYE

Laser Performance

BBTalkin' Boom Microphone Cover

Murrays Part# 52-2530

The BBT Boom Microphone Cover (Set of 5) replacement foam cover. Includes foam cover and Velcro fastener which is compatible with the BbTALKIN USA head accessories.

BBTALKIN' BOOM MICROPHONE COVER (5)

The BBT Helmet Mounts have a slide and lock technology, locking the two tabs on the back of your waterproof case which houses your BbTALKIN unit.

BBTALKIN' HELMET MOUNT

BBTalkin' Multi Connector Set

Murrays Part# 52-2521

This connector is designed with our secure waterproof seal that screws into your BBTalkin' Unit. The end of this connector is a female 3.5mm jack. You can plug any male 3.5mm jack into this multi-connector. If you do not wish to use a BBTalkin' headset with your units, you can plug any earbud with microphone set up that has a 3.5mm male jack into this connector.

BBTALKIN' MULTI CONNECTOR SET

Helmet Speaker Pad with Microphone

Murrays Part# 52-2512M-1

The Helmet Speaker Pad with Microphone is a single sided helmet speaker pad with microphone by BbTALKIN USA. This helmet pad is designed to be used with the Advance Unit. You plug the boom microphone’s 3.5mm audio cable directly into your Advance Unit to establish communication. The microphone and speaker piece on the helmet pads are completely waterproof. The design of the helmet pad allows the flexibility to change out either the microphone pie

BBTALKIN' HELMET SPEAKER PAD WITH MICROPHONE

Constructed from 3-layer material with durable fully taped seams for maximum water and spray protection.
This jacket is tailored to include cleverly positioned pockets, reflective stow away hood, fleece lined hand warmer pockets, reflective prints and adjustable cuffs/hem.
A comfortable fit that comes in cool tonal grey/black with accents of Rooster red styling throughout.

ROOSTER PASSAGE 3 LAYER JACKET

FORWARD WIP HORNS TRANSFER 9x16"

MARINE FORK 1/8" (SS)

F16/F18inf Adjustable Tiller Crossbar

Murrays Part# 56-30138

The adjustable tiller tie bar, when delivered it comes including the rubber euro rods for connecting it with the rudders / tiller arms.
In the center of the tiller crossbar, the connection part (U-bracket) will also be mounted (not the flex joint).

NACRA F16/F18INF ADJUSTABLE TILLER CROSSBAR

DOWNHAUL KIT: CASCADE 8:1 H-20 UPGRADE

SPRING TENSIONED SNAP SHACKLE

Getaway Mainsail (White)

Murrays Part# 30-6005

GETAWAY MAINSAIL (WHITE)

Getaway Mainsail (White)

Murrays Part# 30-6005

WAVE MAINSAIL (WHITE)

NACRA FUN/F18INF/F18EVO/F20C RIGBOX DIAMOND ADJUSTER KIT

NACRA F18INF BOWSPRIT

F20C/F18INF/EVO Gooseneck Base

Murrays Part# 56-30173

The gooseneck for on the mast, this can be used for both Decksweepers as standard sails.

Nacra Part# 30173

NACRA F20C/F18INF/EVO GOOSENECK BASE

H16 Jib Sail (Turquoise)

Murrays Part# 50-20992071

Turquoise jib for the Hobie 16. Made by Hobie Cat and works on any Hobie 16 sailboat.

H-16 JIB SAIL (TURQUOISE)

H16 Jib Sail (Seabreeze)

Murrays Part# 50-20992088

Hobie Cat factory Seabreeze jib sail for Hobie 16. Colors may vary slightly from image.

H-16 JIB SAIL (SEABREEZE)

H20 Forward Crossbar Extrusion

50-40131031

Hobie® factory replacement forward crossbar extrusion for Hobie® 20.

H-20 FORWARD CROSSBAR EXTRUSION

Tiger Daggerboard

Murrays Part# 50-F18050905

Hobie® factory daggerboard for Hobie Tiger.

TIGER DAGGERBOARD

Tiger Mesh Trampoline-Black

Murrays Part# 50-F18025840

Hobie® factory replacement trampoline for Tiger.

TIGER MESH TRAMPOLINE-BLACK

Tiger Upper Gudgeon 2007+

Murrays Part# 50-F18056014

The Hobie Tiger Upper Gudgeon 2007+ is factory replacement upper rudder gudgeon for a Hobie Tiger from 2007 to now.

TIGER UPPER GUDGEON 2007+

H21 Illustrated Parts List

Murrays Part# 50-87167021

Hobie® factory publications aid in identifying parts for the Hobie 21SC or SE. Find the item number for the part you need and easily search the Murrays store. Please note that Hobie Cat® is no longer fully supporting the Hobie 21 boats, so limited parts are available.

Hobie 21 parts lists and manuals are available for free download at the Hobie Cat® Product Support page.

H-21 ILLUSTRATED PARTS LIST

MAST BALL TIGER / FOX

50-F21062673

Hobie® factory replacement mast ball for Tiger and Fox. Ball measures 1-1/2" diameter with a 5/8"-13 threaded hole.

TIGER/FOX MAST BALL

WAVE AFT MAST SUPPORT

NACRA 570/590/F17 RUDDER BLADE

Previous 1 … 42 43 44 45 46 … 57 Next

Recently viewed

All Sailing Parts