All Sailing Parts

All Sailing Parts

2262 products

Everything Nacra, Prindle, Hobie and a few more fun odds and ends.

2262 products

Sort

Dacron Spun Braid 5/16

The Dacron Spun Braid 5/16 is very low-stretch and has a soft, fuzzy surface that offers excellent grip and make it easy on the hands. Ideal for use as a jib or spin sheet. 100% polyester braided core with a spun polyester braided cover. Sold per foot. Spools are 600′. Dacron Spun Braid is a very soft and durable line at an economical price. If you are interested in a premium sheeting line we recommend Robline Racing sheet Pro.

Use this page to order product numbers 39-05

5/16" DACRON SPUN BRAID 8MM

Murrays Part# 001-4045
Hobie 18 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer.

To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18.

Compare to Hobie Cat® #1132 (bearing 60110000 and Teflon™ washer).

Hobie 18 mast bearing 60110000 and 1132

HOBIE 18 MAST BEARING KIT

BIG DRYER SAIL & BOOM BAG

Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole

Murrays Part# 21-0636

The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081.

Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.

Ronstan bow shackle measurements

RONSTAN 5/16" BOW SHACKLE

Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head

Murrays Part# 21-0634

Solid stainless steel bow shackle has 3/16" diameter pin. 

UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.

Ronstan bow shackle measurements

RONSTAN 3/16" BOW SHACKLE

H17/18/20/21/Wave and Getaway
Rudder Cam Kit

Murrays Part# 001-3550

The Rudder Cam Kit: H17, H18, H20, H21, Wave, & Getaway are replacement rudder cams which help keep your Hobie’s rudder lock-down mechanism functioning properly. This kit includes sister screws to install the cams, making it easier to replace the cams. Purchase the complete kit if your boat has the stock flare pins; or you can purchase just the cams (#50-10480000 each) if your boat already has sister screws.

H-17/18/20/21/WAVE AND GETAWAY RUDDER CAM KIT

Mast Step Pin Wave/Getaway .25 x 2" Detent
Murrays Part# 50-8020451
Replacement mast step pin / mast hinge pin for a Hobie Wave and Getaway. 1/4" x 2" detent pin.  
Hobie part # 8020451

MAST STEP DETENT PIN .25x2"

H14/16 Rudder Pins Stainless Steel

Murrays Part# 001-2269

Weight-saving, hollow stainless rudder pins for Hobie® 14 or Hobie® 16 with stronger .065" wall provide reduced wear and the best long-term fit. This kit includes one pair of 3/8" x 8" rudder pins with cotter pins.

New One piece rudder gudgeons have been produced with a slightly smaller metric hole size. If you have a 2020 and newer boat or 2020 and newer one piece gudgeons, our aluminum rudder pins may require force to install and be diff

H-14/16 RUDDER PINS PR (STAINLESS)

Hobie Halyard - Downhaul Cheek Block - 20710000
Murrays Part# 25-3340
The plastic sheave degrades and breaks on older Hobie® 16 downhaul cheek blocks and the entire block must be replaced. Also fits Sol Cat 18. Hole spacing 1/2" on center from side to side; 2-3/4" on center from end to end.
To install, use four #19-5031 6-4 rivets and four #19-5020 sealing casings.
Hobie Cat® Part# 20710000.

HOBIE CHEEK BLOCK - 20710000

Murrays PN 001-0053

The Murrays Rudder Stiffening Spacer is a 2" diameter spacer for use on Hobie, Nacra and Prindle catamarans to eliminate excessive clearances between rudders and castings which cause rudder slop, side to side wobble, and thwart rudder alignment. A kit with spacers and nuts is also available (#01-2053).  The Murrays Rudder Stiffening Spacer are quite thin so that you can achieve a perfect fit. Standard kits come with 8 spacers.

RUDDER STIFFENING SPACER

The Murrays Pins & Rings Kit: Hobie Wave + Getaway includes the most often used spare clevis pins and split rings for the Hobie Wave and Hobie Getaway. Compare to Hobie Part # 30302

WAVE AND GETAWAY PINS & RINGS KIT

Downhaul Cleat with Screws

Murrays Part# 001-1020

The Downhaul Cleat Kit is for mounting in mast track (such as Hobie 16) and includes cleat, screws and channel inserts. Center-to-center hole spacing is 1-1/8". We have another kit for the halyard cleats on the side of the mast that includes rivets.

DOWNHAUL CLEAT WITH SCREWS

Sealed Stainless Steel 3/16" x 3/8"
Pan Head Rivet
Murrays Part# 19-5032S
Sealed rivets have a sealed end that does not require rivet casings to make them water tight. One and done, no casing needed, just insert and pop as you would a normal rivet, and your hole will be sealed.
Among other uses, the Stainless steel 3/16" x 3/8" pan head rivet can be used when Hobie® rivet #8010131 is specified:
Hobie 14 (2) or 16 (4) mast head
Hobie Wave/Getaway/14/16/17/18/18SX/ mast base (4)
Hobie 14/16

RIVET CCP SEALED 6-6 (3/16 X 3/8)

Powerstick_carbon Hobie tiller extension

Powerstick carbon tiller extension - Hobie, Nacra, Prindle, Dart, G-Cat, Sol Cat

POWERSTICK TELESCOPING CARBON TILLER EXTENSION 62-115" - YOKE

Hobie 16 main halyard for all aluminum masts. Hobie part number 20651011

Hobie 16 Main Halyard with Shackle is a wire halyard for the all-aluminum mast (no Comp-Tip) Hobie 16 and is used to raise the main sail. Compare to Hobie Cat® #20651011

H-16 MAIN HALYARD NON-COMPTIP

This 1.5" mast ball is for all post-1983 Nacra catamarans. Ball measures 1-1/2" diameter with a 9/16" hole.

Fits on the 56-2507 Nacra mast support rod.

There is also a 1-1/4" ball for the pre-1983 Nacra sailboats.

Nacra Sailing Factory item# 2504, 30338 and 30062

Nacra Mast Ball 1.5" (Nylon)

Murrays Part# 56-2504

This larger mast ball for post-1983 Nacras. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole.

Fits on the 56-2507 Nacra mast support rod.

There is also a 1-1/4" ball for the older Nacras.

Nacra Sailing Factory item# 30338 and 30062

NACRA MAST BALL 1.5"

Murrays Rudder Covers for Hobies

The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing.

The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover.

Unit: Pair

Made in the U.S.A.

Compatibility: Fits all Hobie rudders except the H21SE (Special

Murrays Rudder Covers for Hobies

The Murrays rudder covers are constructed of durable, UV stable, padded material to protect your rudders from dings, nicks and grime. The red color helps with visibility when trailering. Straps with sturdy buckles keep the covers firmly in place, even when travailing.

The Murrays Rudder covers have strong UV resistance and have 2-3 times the lifespan of a Hobie rudder cover.

Unit: Pair

Made in the U.S.A.

Compatibility: Fits all Hobie rudders except the H21SE (Special

MURRAYS HOBIE RUDDER COVER

H16 and Sol Cat Jib Hank

Hobie part number 22090001

Hobie factory jib hank attaches the jib to the forestay of a Hobie 16 or Sol Cat

H-16/SOL CAT JIB HANK

Getaway Main Halyard

Murrays Part# 002-0973-60

The Murrays Hobie Getaway main halyard for is constructed to the current factory specs. It has a long rope section and a shorter wire section with a stopper and halyard shackle. The rope section is easy on the hands and prevents electrical current from traveling down the mast in the event of an electrical wire contact.
Compare to Hobie part number 37651001

GETAWAY MAIN HALYARD

Hobie 18 Mast Base Hinge casting
60650011

H-18 MAST BASE HINGE

Hobie Shroud Anchor Pin Hobie 16, 17 and 18. 20100000 20100010

HOBIE SHROUD ANCHOR PIN 20100000

Hobie Trampoline Lacing Line Kit: Hobie 14, Hobie 16, Hobie 18: low stretch line offers a longer-lasting option over shock cord and is the better choice for sailors who prefer a very tight tramp. As the line stretches slightly over time, sailors can re-tension the tramp lacing to their liking.
The kit contains three lengths of 3/16" 8-strand black low-stretch line (one piece 33', two pieces 15') and lacing instructions.
This kit will lace all factory and most aftermarket trampolines.

H-14/16/18 LOW STRETCH TRAMPOLINE LACING LINE KIT

Replacement sheave for mast head on Nacra 5.0, 5.2, 5.5, 5.7, 5.8, 6.0, 18 Square, Prindle 16 and Sol Cat 18 (cats that use a wire halyard). UV-resistant acetal material provides high strength and resistance to impact and wear, as well as excellent low friction properties for bearing applications.

RONSTAN SHEAVE: P16 AND NACRA MAST HEAD

MAGIC MARINE PRO HARNESS

Drain Plug with Plastic Base

Murrays Part# 001-0051

This lightweight and inexpensive drain plug features a molded recess in the molded nylon base that traps sealant (sold separately) in place, providing a more watertight seal. Gasket included.

DRAIN PLUG WITH PLASTIC BASE

Mast Bearing Half Round

Murrays Part# 56-2007

Half-round mast bearing for all Prindle mast steps.

Nacra Sailing factory item# 30964

PRINDLE MAST BEARING HALF ROUND

Downhaul Kit: H14/16
Murrays Part# 001-1028
This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast.

This is a fantastic economical and simple solution for the recreational sailor.

Hobie part number 2081

Downhaul Kit: H14/16

Murrays Part# 001-1028

This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast.

This is a fantastic economical and simple solution for the recreational sailor.

Hobie part number 2081

H-14/16 DOWNHAUL KIT

The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by A Fleet Racers looking for a lighter more economic alternative. Murrays helped produce them and here they are! Same diameter, same length, just lighter material and a longer grip compared to the Hobie fiberglass tiller extension.

5/8" diameter black fiberglass tube
Hobie yoke base, same as the Hobie version
16" grip on the top

Weight: 3/4 lb.

Compare to Hobie 20550001

The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by A Fleet Racers looking for a lighter more economic alternative. Murrays helped produce them and here they are! Same diameter, same length, just lighter material and a longer grip compared to the Hobie fiberglass tiller extension.

5/8" diameter black fiberglass tube
Hobie yoke base, same as the Hobie version
16" grip on the top

Weight: 3/4 lb.

Compare to Hobie 20550001

MURRAYS 84" FIBERGLASS TILLER EXTENSION

The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail.
Compare to Hobie part number 38651001.

WAVE MAIN HALYARD

Murrays Part# 001-7050
The gold standard for catamaran racing has been the Coffee Marine Bridle Fly or the Hobie STD bridle vane that was designed based on it. The red plastic vane is very sensitive to wind shifts and easily mounts to the front of a Hobie 16, 14, Wave and all the Prindle Catamarans. With an adapter it can be mounted to any of the Hobiecat sailboats that use a furling drum. To start out, we are offering the standard length which extends about 13" and
Hobie part number 7703

COFFEE MARINE BRIDLE VANE

Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081

RONSTAN 5/16" BOW SHACKLE WITH HOLE

Downhaul Kit: 6:1 Hobie 14/16

Murrays Part# 007-2089

This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050).

Hobie Part# 2089

Downhaul Kit: 6:1 Hobie 14/16

Murrays Part# 007-2089

This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050).

Hobie Part# 2089

H-14/16 6:1 DOWNHAUL KIT

Hobie 16 spare parts kit, shackle tool, drain plugs, rudder pins, clevis pins and rings, 3/16" bow shackle, 1/4" bow shackle, batten tie strings, and 3 mast bearings. Pouch comes in assorted colors as available. Hobie #30305 and #30306.

H-14/16 SPARE PARTS KIT:

Hobie 6 BRIDLE WIRE
The H-16 Bridle Wire is one bridle for Hobie 16 constructed of 316 stainless steel wire to factory specifications. We recommend purchasing two bridles in order to ensure equal length and strength of your bridle wires. Wire lengths changed over the years, please select the appropriate bridle wires for your boat. We recommend Black coated for the longest lifespan.

H-14 Bridle 1/8"

Single bridle for Hobie 14 constructed of 1/8" 1x19 wire to factory specifications. 

This is for Hobie 14s without jibs.

Use this page to order product numbers:

02-0114-01 White
02-0114-02 Black

Compare to Hobie Cat® #10822101

H-16 BRIDLE WIRE

H14/16/18 Dyneema Race Tramp Lace Kit

Murray Part# 001-2242-1

Tramp Lace Kit H14 H16 H18 - Dyneema Race Kit uses Dyneema® which is the best choice for racers or other sailors looking for the ultimate in strength, light weight, and very low stretch characteristics in their tramp line lacing. Dyneema® has excellent ultraviolet and abrasion-resistance properties for longevity.

H-14/16/18 DYNEEMA RACE TRAMP LACE KIT

Carbine Hook (Plastic)

A quick connection of trapeze shock cord to height control adjustment. 2-1/4" long. Compare to Hobie Cat® #2101.

PLASTIC CARBINE HOOK

McLube Sailkote Dry Lubricant

Murrays Part# 40-0408

McLube Sailkote is the easy-to-apply, high performance dry lubricant that makes sails, hulls, rigging and anything that moves on your boat work more efficiently and last longer. Formulated with Dupont Krytox®, an environmentally-friendly, translucent liquid lubricant, it dries quickly to a hard, ultra-slick, hydrophobic dry coating.

MCLUBE SAILKOTE DRY LUBRICANT

Hobie factory replacement retainer clip for Hobie 20-style tiller connector and adjuster kit (#07-1953). TILLER CONNECTION RETAINER CLIP - HOBIE 20. 40590000 MURRAYS.COM - IN STOCK

Hobie 1953 tiller connection kit - new style

H-20 TILLER CONNECTOR RETAINER CLIP

RUDDER PINS W/BUSHINGS H14/16

Aluminum rudder pins for a Hobie 14 and 16. Includes cotter pins and 4 rudder bushings.

Hobie part numbers: 20880001 and 8062001

RUDDER PINS W/BUSHINGS H14/16

Aluminum rudder pins for a Hobie 14 and 16. Includes cotter pins and 4 rudder bushings.

Hobie part numbers: 20880001 and 8062001

H-14/16 RUDDER PINS WITH BUSHINGS

HOBIE FULL AUTO HARNESS - SMALL

Previous 1 2 3 4 … 57 Next

Recently viewed

All Sailing Parts