Sailing Rudder & Foils

Sailing Rudder & Foils

247 products

    Rudder parts for Hobie, NACRA and Prindle Catamarans.  All the parts for the transom, tiller crossbar, rudder arms, rudders and rudder housings.  Tiller extensions, Hobie rudder cams, rudder locking kits, Gudgeons, tiller connection kits and more.

    247 products
    Nacra Side Loader Murrays Part# 56-1018 Side loader holds daggerboard in place Nacra Sailing factory item #30008.
    NACRA SIDE LOADER
    NACRA
    Rudder Cheek Casting Murrays Part# 56-4501 This rudder casting from Nacra Australia is an improvement over original equipment. A nylon insert reduces contact of the rudder and casting, resulting in smooth rudder pivoting. The casting includes a built-in roller for the rudder pull-down line that reduces friction, plus replaceable nylon inserts for the rudder pins to reduce wear on the casting. Fits all Nacras (4.5, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI, 18SQ). Nacra Sailing factory item# 30107
    NACRA RUDDER CHEEK CASTING
    NACRA
    Nacra Rudder Pivot Bolt 1/4-20" Murrays Part# 56-F191 Countersunk rudder pivot bolt measures 1/4-20 x 1-7/8"
    NACRA RUDDER PIVOT BOLT 1/4-20"
    NACRA
    Rudder Bolt Murrays Part# 56-F184 Upper rudder bolt for all Inters. Nacra Sailing factory item# 30362
    NACRA RUDDER BOLT
    NACRA
    NACRA/PRINDLE BOLT FOR GUDGEON 1/4-20X1.25"
    NACRA
    Nacra Rudder Adjustment Eye Nut Murrays Part# 56-F187 This is the lock nut for the adjustment eye on the top of the rudder castings. Infusions MKiii rudder castings stopped using these eyes. Boats sold/ purchased after the release of the F18inf MKiii likely don't have that eye, and so this lock nut is not appropriate. Rudder adjustment eye nut for all Inters is Nacra Sailing factory item #30363. Fits Nacra 460, 500, 570,16,17, F18 Infusion and F20 Carbon
    NACRA RUDDER ADJUSTMENT EYE NUT
    NACRA
    Rudder Bolt Base Inter Murrays Part# 56-F188 1/4-20 x 2" FHMS rudder bolt (base) for all Nacra Inters.
    NACRA RUDDER BOLT BASE
    NACRA
    Out of Stock
    Sunfish Daggerboard Stop Set Murrays Part# 68-85334 The plastic stop set prevents the daggerboard from dropping through the hull, ensuring it stays securely in place while sailing. Helps maintain proper daggerboard positioning. Prevents accidental lowering beyond the intended depth. Durable plastic construction for long-lasting use. An essential component for effective daggerboard control.
    SUNFISH DAGGERBOARD STOP SET
    Laser Performance
    Out of Stock
    Hobie Getaway EZ Loc Tiller Arm Murrays Part# 50-37382011 Replacement tiller arm for Hobie Getaway sailboat with EZ Loc style rudders. Hobie Part# 37382011
    HOBIE GETAWAY EZ LOC TILLER ARM
    Hobie
    Screw #10 x 1/2 PHSMS-P Murrays Part# 50-8031151 Hobie Part# 8031151
    SCREW #10X1/2" PHSMS-P
    Hobie
    Out of Stock
    P18-2/19 Round Tip Rudder Blade Murrays Part# 56-4225 This is the newer blade with the rounded tip as pictured.
    P18.2/19 ROUND TIP RUDDER BLADE
    Murrays Sports
    Out of Stock
    Wave EZ Loc Tiller Arm Murrays Part# 50-39382011 This is the current stock tiller arm for the Hobie Wave. It is part of the EZ Loc Assembly. This will not work with the older H18, H17, H20 Rudder casting system. Hobie Part# 39382011
    WAVE EZ LOC TILLER ARM
    Hobie
    Bolt Allen Head 5/16 18 X 1.5" (Stainless Steel) Murrays Part# 19-2229S Bolt Allen Head 5/16 - 18 X 1.5 (Stainless Steel) - replace hex head bolts used on Hobie 16, 17, 18, 20 Upper adjustable rudder castings. Limited space for Hex head requires thin walled 1/2" socket with 1/6" drive. Socket head bolt uses Allen head tool which is cheap, strong, and compact for on board storage and convenient adjustment.
    BOLT 5/16-18 X 1.5" (SS)
    Misc
    Screw 1/4/20x1.25" PHPMS Murrays Part# 50-8032061 Rear Hatch Screw for Hobie Bravo. Hobie Part# 8032061
    SCREW 1/4-20x1.25" PHPMS
    Hobie
    Out of Stock
    Bolt 5/16-18 x 2-3/4" HX HD Murrays Part# 50-8040391 EZ Loc upper rudder bolt for Hobie Bravo, Getaway and Wave  Hobie Part# 8040391
    BOLT 5/16-18 x 2-3/4" HX HD
    Hobie
    Out of Stock
    Tiller End Cap with Pin Murrays Part# 50-37561203​ Hobie® factory replacement tiller end cap with pin for '07 tiller connector. Fits Hobie Getaway. Hobie Part# 37561203
    TILLER END CAP WITH PIN
    Hobie
    Getaway Tiller Arm Murrays Part# 50-37321111 Hobie® factory replacement tiller arm for Getaway pre-EZ Loc system. This does not fit the EZ Loc Rudder System Hobie Part# 37321111
    GETAWAY TILLER ARM
    Hobie
    Screw #14 X 3/4 PHSMS Murrays Part3 50-8031891 Hobie® factory replacement #14 x 3/4" pan head self-tapping sheet metal screw with Phillips head. Hobie Part# 8031891
    SCREW #14 X 3/4" PHMS
    Hobie
    Out of Stock
    H14/16 Rudder Casting Upper Left Black Murrays Part# 50-10352011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H-14/16 UPPER LEFT RUDDER CASTING-BLACK
    Hobie
    H14/16 Rudder Cast Upper Right Black Murrays Part# 50-10362011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H14/16 UPPER RIGHT RUDDER CASTING-BLACK
    Hobie
    Out of Stock
    Rudder Casting Only Left Prindle Murrays Part# 56-4001 Left rudder casting for all Prindles does not include hardware. The remaining stock of clear anodized castings have not had their tiller arm hole machined and will likely not fit without additional machining. Nacra Part# 30412
    PRINDLE LEFT RUDDER CASTING
    Misc
    Out of Stock
    H17/18/20 Lower Rudder Casting Murrays Part# 50-50322001 Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.
    H-17/18/20 LOWER RUDDER CASTING
    Hobie
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    Rudder Lock Release Strap Murrays Part# 56-4010 This is one of two plates used in each rudder assembly on a Prindle beach cat. This is part of the internal assembly that moves up and down as part of the rudder pull up/down system. The Prindle Rudder Lock Release Strap is works on all Prindles. Nacra sailing factory item# 30415 Prindle Part# 4010
    PRINDLE RUDDER LOCK RELEASE STRAP
    NACRA
    Out of Stock
    Nut Nylock Lo-Pro 1/4-20 Murrays Part# 50-8050101 Hobie® factory replacement low profile 1/4-20 nylock nut. Used on Hobie 14 and 16 gooseneck assembly. Hobie Part# 8050101
    NUT NYLOCK LOW PROFILE 1/4-20"
    Hobie
    Nut 10-32 Nylock Low Profile Murrays Part# 50-8050211 Hobie factory low-profile Nylock 10-32 nut as used on EZ-Loc rudder assembly. Hobie Part# 8050211
    NUT 10-32 NYLOCK LOW PROFILE
    Hobie
    Hobie Rudder Blade - White Nylon Murrays Part# 50-20493000 The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder. Hobie Part# 20493000
    HOBIE RUDDER BLADE - WHITE NYLON
    Hobie
    Getaway EZ Loc Tiller Crossbar Murrays Part# 50-37524001 Newest 4th edition Hobie Getaway crossbar.
    GETAWAY EZ LOC TILLER CROSSBAR
    Hobie
    Plug for Aluminum Stick Murrays Part# 001-0064 15/16"Outer Dimension plug fits the Murrays Aluminum Hiking Stick.
    PLUG FOR ALUMINUM STICK
    Murrays Sports
    Out of Stock
    WAVE/GETAWAY TILLER CONNECTION KIT
    Hobie
    Sale
    NACRA Inter upper rudder casting infF18 mki
    NACRA
    Save $100
    Screw Delrin 3/8-16 X .75" Murrays Part# 50-8032001 Hobie® factory replacement 3/8-16 x 3/4" Delrin screw is used as rudder rake adjustment screw on Pre-EZ Lock Rudder System. Hobie Part# 8032001
    NACRA DELRIN RUDDER SET SCREW
    Misc
    Hobie Part Number 8030361 (304ss) Bolt Allen Head 5/16 - 18 X 1.25 (Stainless Steel) - replace hex head bolts used on H16, 17, 18, 20
    BOLT SOC HD 5/16-18 X 1.25"
    MISC
    H14 Tiller Crossbar-Black Murrays Part# 50-10520011 Tiller crossbar for Hobie 14. Hobie Part# 10520011
    TILLER X-BAR H14 BK
    Hobie
    Sale
    Arriba Fx6 Unused or lightly used with grip
    Arriba
    Save $100
    Out of Stock
    NACRA RUDDER HEAD ROLLER
    NACRA
    Out of Stock
    NACRA RUDDER BASE CASTING
    NACRA
    Out of Stock
    NACRA F18 INFUSION/N20 OLD STYLE RUDDER BLADE
    NACRA
    Rudder Eye Screw Wide With Bushing Murrays Part# 56-32055 The screw which is fitted in your lower casting (Until MK2), this screw including the bushing can be adjusted for the rake of the rudder.
    NACRA RUDDER EYE SCREW WIDE WITH BUSHING
    NACRA
    Out of Stock
    NACRA RUDDER ROLLER UPPERCASTING
    NACRA
    Recently viewed