Sailing Rudder & Foils

Sailing Rudder & Foils

247 products

    Rudder parts for Hobie, NACRA and Prindle Catamarans.  All the parts for the transom, tiller crossbar, rudder arms, rudders and rudder housings.  Tiller extensions, Hobie rudder cams, rudder locking kits, Gudgeons, tiller connection kits and more.

    247 products
    Rudder Pin Nacra, Prindle and H21 (Aluminum) Murrays Part# 001-5272 Aluminum rudder pins for Nacra, Prindle and Hobie® 21 measure 3/8" x 10-1/4" end-to-end, with hole at each end. Cotter pins are included. Sold in pairs
    NACRA/PRINDLE AND H21 ALUMINIUM RUDDER PIN
    Murrays Sports
    Quick Release Pin 1/4 X 1-1/4 with Lanyard Murrays Part# 18-4M125L
    QUICK RELEASE PIN 1/4 X 1-1/4" WITH LANYARD
    Misc
    Out of Stock
    NACRA URETHANE TILLER TIE BAR ROD WITH STRING
    NACRA
    Out of Stock
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-60400011M Murrays Tiller Crossbar Adjustable Cap Kit installs in the end of the Hobie tiller crossbar and allows you to adjust the width of the crossbar which controls the angel of the rudders. Hobie discontinued this part and this is a Murrays Replacement part that we have made here in California. Applications: H14, H16, H17, H18, Hobie 18 SX tiller x-bar Tiller Crossbar Adjuster: 1
    HOBIE TILLER CROSSBAR ADJUSTABLE END CAP - 60400011
    Murrays Sports
    Hobie® factory replacement end cap for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40561001 and 40561000
    Hobie 1953 tiller connection kit - new style
    H-20-1995 & LATER TILLER CONNECTOR END CAP
    Hobie
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    Half Round Load Spreader Murrays Part# 56-4019 This component is installed into the head of the rudder blade to anchor the rudder locking pin. The Prindle Half Round Load Spreader is for rudder system on all Prindles. Prindle Part# 4019 Nacra sailing factory item# 30973
    PRINDLE HALF ROUND LOAD SPREADER
    NACRA
    1/2 BALL (NYLON) - Hobie half round washer spacer tiller connector - Hobie part number 11510000 HOBIE HALF SPHERE TILLER CONNECTOR
    Tiller Connection Kit Murrays Part# 001-2061 The Murrays Tiller Connection Kit assures consistent rudder alignment through the full rudder sweep. Spring-loaded half balls and contoured spacers take the slop out of the tiller-to-crossbar connection on Hobie Cats. Racing class legal. Each kit contains 2 connectors to join the tiller crossbar to the tiller arms. Compare to Hobie Cat® #3052. Applications:; Hobie 14, 16, 17, 18, 18SX
    NYLON 1/2" BALL
    Murrays Sports
    Nylon Spacer Murrays Part# 56-4011 Prindle rudder spacer, Prindle part number 4011.
    ILLUSTRATED PRNDLE RUDDER PARTS LIST
    PRINDLE RUDDER SPACER
    Murrays Sports
    Ronstan Urethane Universal Joint Murrays Part# 21-3133 Smooth, uniform rotation in all directions and a quick, firm response to steering movements. The RF3133 universal joint with snap-on cover is designed to allow quick fitting and removal of the tiller extension from the fixed base. Includes urethane universal, heat shrink tubing, and two-piece mounting base. Universal Joint: Urethane tiller extension universal joint. Suits 13.5mm (17/32") ID Tube
    RONSTAN URETHANE UNIVERSAL JOINT
    Ronstan
    Out of Stock
    H16/17/18 Tiller Crossbar-Post-1995 Murrays Part# 50-20521001 The Tiller Crossbar H16, H17, H18 Post-1995- is a Hobie® factory replacement tiller crossbar for 1995 and newer Hobie® 16, 17 or 18. The Post 95 version comes with the new style quick connect tiller connection system.
    H-16/17/18 TILLER CROSSBAR-POST 1995
    Hobie
    HOBIE TILLER EXT BUSHING Murrays Part# 50-40300001 This is the bushing that goes into the tiller crossbar of most Hobiecat Sailboats. This part was discontinued or otherwise no longer available as a separate part. Compare to Hobie part# 40600001
    HOBIE TILLER BUSHING EXTENDER
    Hobie
    Quick Release Deluxe Pin 1/4 X 1.25" Murrays Part# 18-4M125 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below. Uses: This pin is recommended for connection of hiking stick to crossbar on all Hobie, Nacra and Prindle catamarans. Also used on Hobie 18 SX and Hobie Magnum wings. Compare to Hobie part# 20306 PIN, QR 1/4 X 1-1/4 CUP
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/4"
    Misc
    Tiller Tie Bar Kit Murrays Part# 56-5516 The Nacra Tiller Tie Bar Kit provides improved tiller connect for older Nacras. Nacra Sailing factory item# 30149 and 30150
    NACRA TILLER TIE BAR KIT
    NACRA
    O'Pen Skiff Rudder Mount Top Murrays Part# 65-53270 Upper stainless steel needle Tahe Part# 53270
    O'PEN SKIFF RUDDER MOUNT TOP
    Tahe Outdoors
    Nacra Rudder Blade Cushion Use these cushions to trim your rudder blades in the casting.
    NACRA RUDDER BLADE CUSHION
    NACRA
    Hobie European Rudder Cam Murrays Part# 51-14061180 Hobie Europe factory replacement rudder cam. Similar but not exactly the same as the US version. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape. Hobie part# 14061180
    HOBIE EUROPEAN RUDDER CAM
    Hobie
    Hobie® factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40550001. Murrays.com - In stock
    Hobie 1953 tiller connection kit - new style
    HOBIE THREADED TILLER CONNECTOR END CAP 1953
    Hobie
    Hobie Wave EZ Loc Rudder Assembly Murrays Part# 50-39312000 EZ Loc rudder assembly for the Hobie Wave. Hobie Part# 39312000
    WAVE EZ LOC RUDDER ASSEMBLY
    Hobie
    Out of Stock
    Soft Grip Standard Extension .570 x 11" Murrays Part# 007-3206 This is a grip upgrade for the standard Hobie Tiller extension, it will also fit the Murrays fixed tiller extension as well. Hobie Part# 3206
    SOFT GRIP STANDARD EXTENSION .570 x 11"
    Hobie
    Hobie EZ Loc Rudder Linkage Murrays Part# 50-50313201 Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.  Hobie Bravo, Getaway and Wave Hobie Part# 50313201
    HOBIE EZ LOC RUDDER LINKAGE
    Hobie
    Hobie factory replacement part for Hobie 20-style tiller connector and adjuster kit (#07-1953). Hobie part number 40540000 and 40540001. Murrays.com - in stock
    Hobie 1953 tiller connection kit - new style
    HOBIE THREADED TILLER CONNECTOR ADJUSTER
    Hobie
    Nut Nylock 5/16-18 Low Profile Murrays Part# 50-8050331 Hobie® factory replacement low-profile 5/16-18 nylock nut.  Fits EZ Loc Upper and Lower Rudder Housing Hobie Bravo, Getaway and Wave. Hobie Part# 8050331
    NUT NYLOCK 5/16"-18 LOW PRO
    Hobie
    Out of Stock
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-6040000M Murrays Tiller Crossbar connection kit is a complete kit to connect the Hobie tiller cross bar and tiller arms. This is modeled after the original design but with some upgrades. We use 2 adjustable end caps to extend the overall adjustment length. Allows users shorten their tiller crossbar due to corrosion. 2 adjustable caps also allows users to adjust the crossbar length from either end of the bar. The tiller crossbar
    TILLER CROSSBAR ADJUSTABLE CAP KIT
    Murrays Sports
    Prindle Rudder Lock Bolt Nut Murrays Part# 56-4018 The Prindle Rudder Lock Bolt Nut is the factory replacement 3/8″ hex nut for rudder lock bolts on all Prindles. Also used as the jam nut for adjuster screw on Nacra bridle foil assembly. Nacra Sailing factory item #30420. Prindle part number 4018
    Prindle rudder parts 4000, 4001, 4002, 4004, 4005, 006, 4007, 4009, 4012, 4010, 4014, 013, 4016, F115, F120
    PRINDLE/NACRA RUDDER LOCK BOLT NUT
    NACRA
    Out of Stock
    Washer 5/16 X 9/16 Flat Murrays Part# 50-8080181 Hobie Part# 8080181
    WASHER FLAT 5/16 X 9/16"
    Hobie
    HOBIE WAVE EZ LOC TILLER CROSS BAR Murrays PN 50-39524001 Hobie® factory replacement tiller crossbar assembly for Wave with EZ Loc rudder system. Hobie part number 39524001
    WAVE EASY LOC TILLER CROSS BAR
    Hobie
    Rudder Pins H17/18 (Nylon) Murrays Part# 001-4271 Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. These universal 3/8" x 9-1/4" nylon rudder pins are suited for all Hobie® 17/18/Wave rudder castings. Compare to Hobie Cat® #5052 fiberglass rudder pins (pair).
    RUDDER PINS H-17/18 PR (NYLON)
    Murrays Sports
    Nut Nylock #10-32 Stainless Steel Thick Murrays Part# 19-2515 Mainsheet block replacement nut. The stainless hex nut with nylock insert will not rust or work loose if properly installed. Fits Hobie Main Traveler Car. Fits Hobie Tiller Hinge Screw. Fits Hobie Masthead Sheave Screw H16 Hobie Getaway Compare to Hobie Part Number 8050201
    NUT NYLOCK #10-32 (SS) THICK
    Misc
    HOBIE TIGER RUDDER CAM Replacement rudder cam for a Hobie Tiger Hobie part number F14061180
    HOBIE TIGER RUDDER CAM
    Murrays Sports
    Out of Stock
    O'Pen Skiff Tiller Extension 70cm Murrays Part# 65-31695 Stick of 70 cm for the O'pen Skiff. Non-slip coating. Tahe Part# 31695
    O'PEN SKIFF TILLER EXTENTION 70CM
    Tahe Outdoors
    O'PEN SKIFF BLADE BAG
    Tahe Outdoors
    O'Pen Skiff Tiller End Plug Murrays Part# 65-31697 This part commonly fails in the rudder housing and fractures out of the assembly, causing the rudder to be very sloppy or fall of the boat. The earlier boats used rivets, latter boats used screws and nuts. This pack of ten is great for a fleet. If you have a fleet and are struggling with these issues, consider the Solid Murrays Tiller End Plug upgrade.
    O'PEN SKIFF TILLER END PLUG (10PK)
    Tahe Outdoors
    Out of Stock
    Getaway Tiller Crossbar (Older Castings, Tendon Style Connectors) Murrays Part# 50-37522001 Hobie Getaway tiller crossbar for boats with tendon style connectors and older style rudder castings. Hobie Part# 37522001
    GETAWAY TILLER CROSSBAR
    Hobie
    Hobie factory tiller connector insert bearing for Hobie 20 Miracle. Hobie part number 40680001. Murrays.com - in stock
    HOBIE TILLER CONNECTOR INSERT BEARING
    Hobie
    TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001
    Hobie 1953 tiller connection kit - new style
    TILLER ARM END CAP SWIVEL
    Hobie
    Yoke Stamping Only Stainless Steel Murrays Part# 001-0063 Replacement yoke stamping for #01-0062 hiking stick yoke assembly. Compare to Hobie Cat® #3205.
    YOKE STAMPING ONLY (SS)
    Murrays Sports
    Screw PHMS #10-32 X 1 Stainless Steel Slot Head Murrays Part# 19-2915 Stainless steel, pan head #10-32 x 1" machine screw with slot is used as dolphin striker screw on all Prindles. Replaces Murrays item #56-F112. Also used in some Hobie Applications, compare to 8030111 Hobie Part. Applications: H18/18 SX/16 and Getaway Tiller Hinge Screw: 2
    SCREW PHMS #10-32 X 1" (SS)
    Misc
    Bolt Hex Head 5/16-18 X 1.5" Murrays Part# 19-2229 Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting. Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    Recently viewed