Sailing Rudder & Foils

Sailing Rudder & Foils

246 products

    Rudder parts for Hobie, NACRA and Prindle Catamarans.  All the parts for the transom, tiller crossbar, rudder arms, rudders and rudder housings.  Tiller extensions, Hobie rudder cams, rudder locking kits, Gudgeons, tiller connection kits and more.

    246 products
    Rudder Kick-Up Stop Murrays Part# 56-4518 The Nacra Rudder Kick-Up Stop is used on the Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ. Performance Sports factory item# 4518
    NACRA RUDDER KICK-UP STOP
    NACRA
    O'Pen Skiff Tiller End Plug Murrays Part# 65-31697 This part commonly fails in the rudder housing and fractures out of the assembly, causing the rudder to be very sloppy or fall of the boat. The earlier boats used rivets, latter boats used screws and nuts. This pack of ten is great for a fleet. If you have a fleet and are struggling with these issues, consider the Solid Murrays Tiller End Plug upgrade.
    O'PEN SKIFF TILLER END PLUG (10PK)
    Tahe Outdoors
    Hobie EZ Loc Rudder Housing 50-50313001 EZ Loc Rudder Housing for Hobie Bravo EZ Loc Rudder Housing for Hobie Getaway EZ Loc Rudder Housing for Hobie Wave Hobie part number 50313001 Fits Hobie Wave and Hobie Bravo and Hobie Getaway
    HOBIE EZ LOC RUDDER HOUSING
    Hobie
    Out of Stock
    Getaway Tiller Crossbar (Older Castings, Tendon Style Connectors) Murrays Part# 50-37522001 Hobie Getaway tiller crossbar for boats with tendon style connectors and older style rudder castings. Hobie Part# 37522001
    GETAWAY TILLER CROSSBAR
    Hobie
    TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock
    HOBIE TILLER ARM INSERT
    Hobie
    Screw H20 Connector 10-24 X .25" Murrays Part# 50-8032401 Hobie® factory replacement screw for Hobie 20 tiller connector. Stainless steel 10-24 x 1/4" pan-head machine screw with Phillips head. Hobie Part# 8032401
    H-20 CONNECTOR SCREW 10X24X.25"
    Hobie
    Bolt Hex Head 5/16-18 X 1.5" Murrays Part# 19-2229 Use this stainless steel, 5/16-18 x 1-1/2" hex head bolt as beam strap bolt for Nacra. Substitute for Nacra Sailing factory item #30358. This bolt is also used to hold the cam stop plate on a Hobie Rudder Upper casting. Replaces Hobie Cat® Part# 8040301 and Murrays Part# 56-F164
    BOLT HEX HEAD 5/16-18 X 1.5"
    Misc
    HOBIE WAVE TILLER CROSSBAR
    WAVE TILLER CROSSBAR M20 STYLE Hobie PN 39521001
    HOBIE WAVE TILLER CROSSBAR M20 STYLE
    Hobie
    TILLER XBAR GETAWAY os
    Hobie
    H20 Rudder Bumper Murrays Part# 006-190807 The Rudder Bumper Hobie 20 is the wedge that mounts under the the lower casting on a Hobie 20 to prevent the rudders from turning too far into the hull and risking the tiller x-bar inverting. This also prevents stress on the hulls from the rudder casting slamming into it. This part mounts with a bolt and nut rather than a course thread screw like the original part.
    H-20 RUDDER BUMPER
    Murrays Sports
    WASHER STAINLESS STEEL 1/4 x 1/2 x .032"
    Hobie
    H16 Adjustable Lower Rudder Casting Murrays Part# 50-10412011 Black adjustable lower rudder casting for Hobie® 16 is a factory replacement part. Includes rudder cam. This is the standard lower casting on Hobie 16 beachcats since 1983. There is an adjustable screw at the base of the casting to help adjust rudder rake and a slightly different casting shape than the earlier rudder castings. The spring length is also longer on these than pre '83 castings.
    Hobie 16 ADJUSTABLE LOWER RUDDER CASTING
    Hobie
    Prindle Rudder Arm Slotted P15/16/18 Murrays Part# 56-5004 22.5" Anodized slotted rudder arm fits all Prindle 15, 16 and 18 Nacra Sailing factory item #30430
    PRINDLE SLOTTED RUDDER ARM
    NACRA
    Out of Stock
    Detent Plunger EZ Lock System Murrays Part# 50-20492021 Hobie Cat® factory detent plunger for EZ Loc rudder assembly. Hobie Bravo, Getaway and Wave Hobie Part# 20492021
    BRAVO/WAVE/GETAWAY DETENT PLUNGER EZ LOC SYSTEM
    Hobie
    Out of Stock
    Daggerboard Hold Down Tiger 50-F99501200 Hobie® factory daggerboard hold down for Tiger.
    TIGER DAGGERBOARD HOLD DOWN
    Hobie
    Bolt Hex 5/16-18 X 1" Murrays Part# 50-8040171 Hobie® factory hex head bolt measures 5/16-18 x 1". Used on #07-1953 Tiller Connector for Hobie® 20. Hobie Part# 8040171
    BOLT HEX 5/16-18 X 1"
    Hobie
    Nacra Pivmatic Assembly with Pin: Aluminum Cleat Murrays Part# 56-0266-1 Positive, reliable and easy to install. Nacra rudders automatically kick up on contact with submerged objects with this rudder release fitting. This upgraded Pivmatic assembly has a heavy-duty aluminum cleat that is not as susceptible to wear and stripping as plastic. Complete kit for one side as shown.
    NACRA PIVMATIC ASSEMLY WITH PIN: ALUMINUM CLEAT
    NACRA
    Out of Stock
    NEW O'Pen Skiff Rudder Assembly Murrays PN 65-31784 O'Pen OEM part #31784 The NEW O'Pen Skiff Rudder Assembly for the O'Pen Skiff. The O'pen Skiff is formerly known as the O'Pen Bic. The NEW rudder assembly which was released in the August of 2025 has been redesigned to break less tiller end plugs and last longer. You can spot the difference in the rudder housing as it sits against the transom of the boat. The new version has a smaller gap between the rudder housing and the transom. It also feathers a l
    NEW O'Pen Skiff Rudder Assembly Murrays PN 65-31784 O'Pen OEM part #31784 The NEW O'Pen Skiff Rudder Assembly for the O'Pen Skiff. The O'pen Skiff is formerly known as the O'Pen Bic. The NEW rudder assembly which was released in the August of 2025 has been redesigned to break less tiller end plugs and last longer. You can spot the difference in the rudder housing as it sits against the transom of the boat. The new version has a smaller gap between the rudder housing and the transom. It also feathers a l
    O'PEN SKIFF RUDDER ASSEMBLY - NEW
    Tahe Outdoors
    Out of Stock
    NACRA RUDDER COVER
    NACRA
    Clevis Pin 5/16 x 2-3/16" Murrays Part# 56-4586 Uses: This 5/16" x 2-3/16" clevis pin is for all Inter rudder assemblies. Mast step pin for Hobie 21SE 21SC  Nacra sailing factory item# 30427 Same as Hobie Part# 8020611
    CLEVIS PIN 5/16 x 2 3/16"
    NACRA
    Out of Stock
    Hobie Tiller End Cap Murrays Part# 50-10560000 Replacement end cap for Hobie tillers.
    HOBIE TILLER END CAP
    Hobie
    Washer 5/16 x 3/4 Flat SS Murrays Part# 50-8080671 EZ Loc Rudder Assembly Lower Bolt Washer for Hobie Bravo, Getaway and Wave Hobie Part# 8080671
    WASHER STAINLESS STEEL 5/16 x 3/4" FLAT
    Hobie
    Out of Stock
    Hobie Getaway EZ Loc Rudder Assembly Murrays Part# 50-37312000 Hobie Getaway EZ Loc style rudder assembly complete. Hobie Part# 37312000
    HOBIE GETAWAY EZ LOCK RUDDER ASSEMBLY
    Hobie
    Washer Nylon 5/16" Murrays Part# 50-8080681 Washer for tiller connector rod #50-40530001. Hobie® factory item. Hobie Part# 8080681
    WASHER NYLON 5/16"
    Hobie
    Hobie Getaway Tiller Connector Screw Murrays Part# 50-40530021 Hobie® factory replacement tiller connector screw for Club Wave. Hobie Part# 40530021
    GETAWAY TILLER CONNECTOR SCREW
    Hobie
    Rudder Gudgeon Murrays Part# 56-1016 Rudder gudgeon for Prindle 15, 16 and 18 Nacra Sailing factory item# 30993
    NACRA RUDDER GUDGEON
    NACRA
    Out of Stock
    H16 Rudder Casting Cam Pin 1/4" Murrays Part# 50-10470000 Hobie® factory replacement flare cam pin for Hobie® 16 rudder casting is 1/4" diameter. Flaring this pin can be difficult, so Murrays recommends using #01-2051 sister screws in place of this stock pin.
    H-16 RUDDER CAST CAM PIN 1/4"
    Hobie
    Out of Stock
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Plug for Aluminum Stick Murrays Part# 001-0064 15/16"Outer Dimension plug fits the Murrays Aluminum Hiking Stick.
    PLUG FOR ALUMINUM STICK
    Murrays Sports
    Inter Rudder Eye Adjustment Screw Murrays Part# 56-1000 Rudder adjustment eye screw for all Inters Nacra Sailing factory item #30000
    NACRA INTER RUDDER EYE ADJUSTMENT SCREW
    NACRA
    Out of Stock
    H21 Super Cruiser Rudder Pin Murrays part# 50-30740001 H21/SC Hobie Rudder Pin for the Hobie 21 and the Hobie 21 Sport Cruiser. Hobie part# 30740001
    H-21SC RUDDER PIN
    Murrays Sports
    Nacra Side Loader Murrays Part# 56-1018 Side loader holds daggerboard in place Nacra Sailing factory item #30008.
    NACRA SIDE LOADER
    NACRA
    Rudder Cheek Casting Murrays Part# 56-4501 This rudder casting from Nacra Australia is an improvement over original equipment. A nylon insert reduces contact of the rudder and casting, resulting in smooth rudder pivoting. The casting includes a built-in roller for the rudder pull-down line that reduces friction, plus replaceable nylon inserts for the rudder pins to reduce wear on the casting. Fits all Nacras (4.5, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI, 18SQ). Nacra Sailing factory item# 30107
    NACRA RUDDER CHEEK CASTING
    NACRA
    Out of Stock
    NACRA UPPER RUDDER CASTING MKII WITHOUT TILLER ARM
    NACRA
    Right Rudder Casting Murrays Part# 56-4005 ​Right rudder casting for all Prindles does not include hardware. Nacra Sailing factory item# 30413
    PRINDLE RIGHT RUDDER CASTING
    Murrays Sports
    Rudder Bolt Murrays Part# 56-F184 Upper rudder bolt for all Inters. Nacra Sailing factory item# 30362
    NACRA RUDDER BOLT
    NACRA
    Nacra Rudder Adjustment Eye Nut Murrays Part# 56-F187 This is the lock nut for the adjustment eye on the top of the rudder castings. Infusions MKiii rudder castings stopped using these eyes. Boats sold/ purchased after the release of the F18inf MKiii likely don't have that eye, and so this lock nut is not appropriate. Rudder adjustment eye nut for all Inters is Nacra Sailing factory item #30363. Fits Nacra 460, 500, 570,16,17, F18 Infusion and F20 Carbon
    NACRA RUDDER ADJUSTMENT EYE NUT
    NACRA
    Bolt 5/16-18 x 2-1/2" HX HD Murrays Part# 50-8040321 EZ Loc Lower Rudder Bolt for Hobie Bravo, Getaway and Wave. Hobie Part# 8040321
    BOLT 5/16-18 x 2-1/2" HX HD
    Hobie
    Screw 1/4-20 x 1" THMS-P SS Murrays Part# 50-8030701 Hobie® factory replacement 1/4-20 x 1" stainless steel screw. Used on Hobie® pre-EZ-Loc rudder system, tendon tiller connector, rudder adjuster, Hobie 20 shroud anchor plate. Applications: H18/ Hobie 18 SX Rudder Adjuster Screw: 1 Compare to Hobie Part# 8030701
    SCREW STAINLESS STEEL 1/4-20x1"
    Hobie
    Out of Stock
    H14/16 Rudder Cast Upper Right Black Murrays Part# 50-10362011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H14/16 UPPER RIGHT RUDDER CASTING-BLACK
    Hobie
    Recently viewed