Hobie mast parts: cheek block, downhaul, halyard, mast head, base, bearing, ball, luff track

Sailing Mast Parts

265 products

    Hobie, Nacra and Prindle mast parts: Halyard cleat, cheek block, gooseneck, downhaul, mast head, mast base, mast hinge, mast bearing, mast ball 

    265 products
    Murrays Part# 001-4045 Hobie 18 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer. To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18. Compare to Hobie Cat® #1132 (bearing 60110000 and Teflon™ washer).
    Hobie 18 mast bearing 60110000 and 1132
    HOBIE 18 MAST BEARING KIT
    Murrays Sports
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16" BOW SHACKLE WITH HOLE
    Ronstan
    Out of Stock
    H20 Spreader Tip Murrays Part# 50-41410001 Hobie® factory replacement spreader tip for Hobie® 20. Hobie Part# 41410001
    H-20 SPREADER TIP
    Hobie
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie's Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    GETAWAY MAST HEAD SHEAVE Replacement Hobie Getaway mast head sheave. Hobie part number 37611001
    GETAWAY MASTHEAD SHEAVE
    Hobie
    Mast Step Hinge Murrays Part# 56-6815 Designed and built to meet or exceed original OEM.  ​Mast step hinge for all Prindles. Use two #56-F128 mast step hinge pins. Nacra Sailing factory item# 30455
    PRINDLE MAST STEP HINGE
    Murrays Sports
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    Ronstan bow shackle measurements
    RONSTAN 5/16" BOW SHACKLE
    Ronstan
    Hobie Gooseneck Hinge Vertex Murrays Part# 50-50772031 Hobie® factory replacement gooseneck vertex for all Hobie® Cats. Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    H14/16 Main Halyard Hook Murrays Part# 25-3330 The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation. Hobie part# 10680000 Nacra part number 6812
    H-14/16 MAIN HALYARD HOOK
    Hobie
    Harken 38mm Big Bullet Sheave Murrays Part# 56-6503 The Mast Head Sheave NACRA 4.5, 5.0, 5.2, 5.7 is an upgraded replacement sheave for mast head on Nacra 4.5, 5.0, 5.2 and 5.7 has a Delrin® sheave with Delrin® ball bearings.
    HARKEN 38MM BIG BULLET SHEAVE
    NACRA
    Prindle split rings and clevis pin kit, mast hinge pin
    PRINDLE PINS & RINGS KIT
    Murrays Sports
    Mast Float Bearing Murrays Part# 50-36600031
    MAST FLOAT BEARING
    Hobie
    H18 Mast Bearing Murrays Part# 50-60110000 Hobie Cat® factory mast bearing for Hobie 18. This part sits on the mast step to facilitate mast rotation on the Hobie 18. Hobie part# 60110000
    H-18 MAST BEARING
    Hobie
    Out of Stock
    H20 Jib Halyard Swivel Toggle Murrays Part# 50-41880001 Hobie® factory replacement jib halyard toggle for Hobie® 20 Miracle.
    H-20 JIB HALYARD SWIVEL TOGGLE
    Hobie
    Mast Float Mount Plate Murrays Part# 50-39640020 Mast float plate for the Hobie Baby Bob and the Mama Bob. Sold individually Hobie Part# 39640020
    MAST FLOAT MOUNT PLATE
    Hobie
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    Harken 29mm Bullet Sheave Murrays Part# 28-0160 Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
    HARKEN 29MM BULLET SHEAVE
    Harken
    Sunfish Lower Mast Cap With Fastener Murrays Part# 68-90431 This plastic plug fits securely at the bottom of the Sunfish mast, providing protection and stability. Features:  Designed for the lower end of the mast Includes fasteners for secure installation Provides protection and structural support for the mast.
    SUNFISH LOWER MAST CAP WITH FASTENER
    Laser Performance
    Out of Stock
    Small Mast Tang Murrays Part# 56-6607 Stainless steel mast tang with four mounting holes is used for jib halyard or mounting spinnakers on Nacra cats. Use four #19-5031 rivets and #19-5020 casings for installation. Nacra part# 6607
    NACRA SMALL MAST TANG
    NACRA
    Out of Stock
    Hobie Spreader Covers Murrays part# 007-3262 These vinyl spreader bar end covers are real sail-savers! The black, smooth resilient covers protect the jib luff from wear and tear from cotter keys and sharp edges. Pair. Hobie Cat® factory item #3262.
    HOBIE SPREADER COVERS
    Hobie
    Out of Stock
    H-20 SPREADER SLIDE
    Hobie
    Ronstan Series 20 Utility Block, Tube Rivet Murrays Part# 21-0661 Rontan's cheek block is a Hobie® 18 and Prindle downhaul and turning block. Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Hollow rivets in the block heads can be fitted with shackles, which can also be used to add a becket for extra purchase.
    RONSTAN MIDGET SINGLE BLOCK (CHEEK)
    Ronstan
    Lower Diamond Tang Murrays Part# 56-6610 Lower diamond tang for Inter, Nacra 500 and 570 Mount with six #19-5031 rivets Use rivet casings if you want to seal the mast ​Performance Sports Factory item# 6610 Nacra Sailing Part# 30183
    NACRA LOWER DIAMOND TANG
    NACRA
    DIAMOND WIRE ROLLER
    Misc
    Quick Release Detent Pin 1/4 X 3" Murrays Part# 18-4D300 Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: - Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats. Compare to Hobie part # 8020501
    Quick Release Detent Pin 1/4 X 3" Murrays Part# 18-4D300 Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings). Uses: - Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats. Compare to Hobie part # 8020501
    QUICK RELEASE DETENT PIN 1/4 X 3"
    Misc
    Halyard Cleat Kit with Rivets Murrays Part# 001-1019 The Murrays Halyard Cleat Kit with Rivets pulls the halyard out of the way to keep the battens from hanging up on the halyard of an H16. The kit includes the halyard cleat and sealed stainless rivets. Center-to-center hole spacing is 31mm. *Photo is out of date and kit no longer comes with casings as the rivets that are included come sealed. Compare to Hobie Cat Part 10730000
    HALYARD CLEAT KIT WITH RIVETS
    Murrays Sports
    Downhaul Cleat with Screws Murrays Part# 001-1020 The Downhaul Cleat Kit is for mounting in mast track (such as Hobie 16) and includes cleat, screws and channel inserts. Center-to-center hole spacing is 1-1/8". We have another kit for the halyard cleats on the side of the mast that includes rivets.
    DOWNHAUL CLEAT WITH SCREWS
    Murrays Sports
    Out of Stock
    Hobie Mast Step Pin 3/16 x 2 1/8" - 8020080 Replacement Hobie 14 and Hobie 16 mast step pin. Measures 3/16" x 2-1/8" Used with the Hobie mast step link kit 21380001 for raising and lowering the mast on a Hobie 14 and 16. Also called Hobie 16 mast hinge pin, mast step hinge pin, mast base pin, mast step link pin... Hobie part number 8020080
    HOBIE MAST STEP PIN 3/16 X 2 1/8 - 8020080
    Hobie
    Out of Stock
    H20 3/16 Jib Swivel Pin Murrays Part# 50-41890001 Hobie® factory replacement pin swivel for Hobie® 20 jib.
    H-20 3/16" JIB SWIVEL PIN
    Hobie
    Comp-Tip Mast Head Sheave for H16 Wave Murrays Part# 50-20614210 CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer. The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole. The larger sheave for the obsolete mast head for all-aluminum mast is no longer available. Hobie Part number 20614210
    H-16/WAVE COMP-TIP MAST HEAD SHEAVE
    Hobie
    Out of Stock
    Mast Float Attachment Kit: H14/16 Murrays Part# 007-30116 This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here.
    H-14/16 MAST FLOAT ATTACHMENT KIT
    Hobie
    Hobie 16 mast bearings. Teflon mast chips, Hobie part number 11110005
    Hobie 16 Mast bearing kit comes with 3 Teflon mast pivot bearings for the Hobie 14, and 16 as well as the older Waves and getaways. Mast bearings sit between the mast step casting and the mast base casting to reduce friction and allow for easier mast rotation and prevent metal-to-metal contact. The mast chips will form to mast base with first use. Mast bearing should be replaced about once a year, depending on use. Compare to Hobie part# 11110005
    H-14/16 MAST BEARING (3-PKG)
    Murrays Sports
    Ronstan S-Hook, 8mm (5/16") Murrays Part# 21-0049 The Ronstan 8mm S-Hook features a closed eye and long return leg to ensure a positive attachment and avoid accidental release. 316 Stainless Steel, 8mm diameter bar Ronstan Part# RF49
    RONSTAN S HOOK, 8MM (5/16")
    Ronstan
    H17 Mast Base Washer Murrays Part# 50-52411001 Replacement washer for Hobie 17 mast base assembly. Hobie Part# 52411001
    H-17 MAST BASE WASHER
    Hobie
    Out of Stock
    Diamond Wire Tang Murrays Part# 50-61480000 Hobie® factory replacement diamond wire tang Hobie Part# 61480000
    DIAMOND WIRE TANG
    Hobie
    MURRAYS H-16 HALYARD GRIP KIT The Murrays H16 Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking.  Mostly used on the Hobie 16. Compare to Hobie part number 114
    MURRAYS H-16 HALYARD GRIP KIT
    Murrays Sports
    H17/18 Mast Seal Plate Murrays Part# 50-61080000 Replacement mast seal plate for the Hobie 17 or Hobie 18.  Hobie Part# 61080000
    H-17/18 MAST SEAL PLATE
    Hobie
    H18 Mast Head/Base Sheave Murrays Part# 50-60620000 Factory replacement sheave for Hobie 18 mast head/base and outhaul assembly. Specs: 1" Diameter x 3/8" wide and 1/4" hole. Also used as traveler control line turning sheave on 2005 and newer Hobie 16 sailboats. Applications: Hobie 18 - Mast head halyard sheave ; mast base halyard sheave ; outhaul car sheaves. Hobie 16 - Jib Traveler line sheave. (in the H16 Race Corner Castings) use 50-8011251 Rivet
    H-18 MAST HEAD/BASE SHEAVE
    Hobie
    Out of Stock
    HOBIE 20 DOWNHAUL SHEAVE - 40700541 Hobie factory replacement downhaul sheave for Hobie® 20 mast. UV-stabilized.   SPECS: 1/2" wide by 1 5/32" diameter, 1/4' hole.
    H-20 DOWNHAUL SHEAVE
    Hobie
    Out of Stock
    HOBIE HALYARD GRIP KIT The Hobie Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking. Mostly used on the Hobie 16. Hobie part number 114
    HOBIE HALYARD GRIP KIT
    Hobie
    Recently viewed