Hobie mast parts: cheek block, downhaul, halyard, mast head, base, bearing, ball, luff track

Sailing Mast Parts

265 products

    Hobie, Nacra and Prindle mast parts: Halyard cleat, cheek block, gooseneck, downhaul, mast head, mast base, mast hinge, mast bearing, mast ball 

    265 products
    Mast Cleat Murrays Part# 011-6481 The Mast Cleat is a can be used as a downhaul / halyard cleat on a Hobie 14 and or 16. Compare to Hobie Cat® factory item #10730000. 31mm Center to Center.
    MAST CLEAT
    Murrays Sports
    NACRA INTER 17 SPINNAKER WIRE TANG
    NACRA
    Nacra Compression Sleeve Murrays Part# 56-2506 The Nacra/Inter Compression Sleeve slips over the Nacra/Inter mast support rod between the nuts and washers to protect the front crossbar. The anodized aluminum tube measures 3-3/4" long x 5/8" ID. Performance Sports Factory item #2506
    NACRA COMPRESSION SLEEVE
    NACRA
    MAST HINGE PIN NACRA/H17/20 Murrays Part# 56-F158 The mast base engages the mast ball and is secured by this headless clevis pin to allow the mast to be safely raised or lowered. Specs: 1/4" diameter x 2-3/8" overall length with a grip length of 1-15/16" Compatibility: Nacra Inter, F18, N15, F17, 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ, as well as Hobie 17, Tiger and 20. Split rings are sold separately. Compare to Hobie Cat part number 50406301.
    NACRA MAST HINGE PIN
    NACRA
    Ronstan Stainless Steel Bow Shackle, 3/16" Pin, Coined Head Murrays Part# 21-0634 Solid stainless steel bow shackle has 3/16" diameter pin.  UDL BL - The “Uniformly Distributed Load” breaking load of the shackle; the load is applied across the full span of the shackle pin. PL BL - The “Point Load” breaking load of the shackle; the load is only applied at the center or one side of the shackle pin.
    Ronstan bow shackle measurements
    RONSTAN 3/16" BOW SHACKLE
    Ronstan
    Mast Step Pin Wave/Getaway .25 x 2" Detent Murrays Part# 50-8020451 Replacement mast step pin / mast hinge pin for a Hobie Wave and Getaway. 1/4" x 2" detent pin.   Hobie part # 8020451
    MAST STEP DETENT PIN .25x2"
    Hobie
    Quick-Release Pin Detent 1/4 X 1-1/2 Murrays Part# 18-4D150 The Quick-Release Pin Detent 1/4 X 1-1/2 is an economical, quick connection for Hobie 16 mast step pin. A spring-loaded ball exerts sufficient pressure to help avoid accidental release. Measurements are 1/4″ diameter x 1-1/2″ maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE DETENT PIN 1/4 X 1-1/2"
    Misc
    Mast Base Hinge Murrays Part# 56-6516 Mast base hinge plate for Prindle 15 Performance Sports Factory item# 6516
    PRINDLE MAST BASE HINGE
    NACRA
    Lower Diamond Tang Murrays Part# 56-6818 Lower diamond tang for Inters and Nacra 500/570 Performance Sports Factory item# 6818 Nacra Sailing# 30196
    NACRA LOWER DIAMOND TANG
    NACRA
    PRINDLE MAST STEP HINGE PIN
    Murrays Sports
    RONSTAN 4" HORN CLEAT
    Ronstan
    H-16 FOAM MAST PLUG
    Hobie
    Replacement sheave for mast head on Nacra 5.0, 5.2, 5.5, 5.7, 5.8, 6.0, 18 Square, Prindle 16 and Sol Cat 18 (cats that use a wire halyard). UV-resistant acetal material provides high strength and resistance to impact and wear, as well as excellent low friction properties for bearing applications.
    RONSTAN SHEAVE: P16 AND NACRA MAST HEAD
    Ronstan
    EYE STRAP KIT - 2072
    Murrays Sports
    H18 Compression Sleeve Murrays Part# 50-61490000 Hobie® factory replacement compression sleeve for mast of Hobie 18.
    H-18 COMPRESSION SLEEVE
    Hobie
    Hobie 18 mast step hinge pin, has a hole on one end only. The headless clevis pin measures 1/4″ diameter by 3-3/8″ grip length Hobie Part # 8020501
    HEADLESS CLEVIS PIN 1/4 X 3-3/8"
    Misc
    SINGLE SHANK BALL STOP 3/32"
    Misc
    Out of Stock
    H16 Mast Seal Plate Murrays Part# 50-21090001 Hobie® factory replacement mast seal plate for Hobie® 16.
    H-16 MAST SEAL PLATE
    Hobie
    Out of Stock
    H-14/16 FOAM PLUG FOR PYLON
    Hobie
    Out of Stock
    H17/18 Mast Foam Plug Murrays Part# 50-60060000 Hobie® factory replacement foam plug for Hobie® 17 or 18 mast.
    H-17/18 MAST FOAM PLUG
    Hobie
    Hobie Tracker Deck Plate Murrays Part# 007-1051 The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system. Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block. Sold individually Hobie part# 11870000
    Hobie Tracker Deck Plate Murrays Part# 007-1051 The standard replacement deck plate for the traveler on all Hobie® 14, 16 and newer 17's Uses a 3/16 x 1/2" clevis pin to attach to the main sheet system. Also used in Hobie 14 and Hobie 16 upgrade downhaul systems to secure lower block. Sold individually Hobie part# 11870000
    TRACKER DECK PLATE (EA)
    Hobie
    CHANNEL INSERT M4 - .7mm with SCREW
    Misc
    H16 Masthead Sheave Spacer Murrays Part# 50-20614231 H16 Masthead Sheave Spacer. This is a replacement bearing surface for the comptip masthead sheaves in H16 mastheads. Fits Hobie Getaway Masthead Sheaves Hobie Part# 20644231
    H-16 MASTHEAD SHEAVE SPACER
    Hobie
    Prindle 18/19 Ronstan Mast Head Base Sheave Murrays Part# 56-6804 Replacement sheave for mast base on Prindle 15, 18, 18.2, 19 and Nacra 2003 and later mast head. Sheave measures 1-1/8" diameter x 3/8" wide. Please note that this item replaces #6803 that is no longer available.
    PRINDLE 18/19 RONSTAN MAST HEAD SHEAVE
    Ronstan
    Out of Stock
    HOBIE DOWNHAUL SCALE - 2082 Can you ever remember where the downhaul was set that day you “smoked” everyone. This handy stick on scale takes the guess work out of setting the downhaul.
    HOBIE DOWNHAUL SCALE
    Hobie
    Out of Stock
    H16 Mast Head Sheave Pin  Hobie Part# 50-10630001 This is a hollow rivet for installing the Hobie 16 masthead sheave on an all aluminum mast, large pulley masthead. Requires special tools or creative minded sailor to improvise their own installation method
    H-16 MAST HEAD SHEAVE PIN
    Hobie
    Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). Uses: This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Hobie 18 main traveler car  Prindle Part# 6004  Comparable to Hobie Cat® Part# 8020431
    1/4 X 1-3/8" Clevis Pin Murrays Part# 22-9804 Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole). This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles. Prindle Part# 6004 Comparable to Hobie Cat® Part# 8020431
    CLEVIS PIN 1/4 X 1-3/8"
    Misc
    Clevis Pin1/4 X 1" Murrays Part# 50-8020401 Hobie® factory replacement 1/4" x 1" clevis pin. Compare to Hobie Part Number 8020411 Applications: H18 / Hobie 18 SX Tiller Yoke Clevis Pin: 1
    CLEVIS PIN 1/4 X 1"
    Hobie
    Clevis Pin 1/4 X 1-1/8 Murrays Part# 22-9803 Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole). Compare to Hobie Part 8020420 and 8020410
    CLEVIS PIN 1/4 X 1-1/8"
    Misc
    Bolt Hex Head 5/16-18 X 4.50" (Stainless Steel) Murrays Part# 19-2237 Stainless steel hex head bolt for Prindle mast rotation control arm. Use #19-2520 nylock nut. This bolt is a replacement for item #56-F110 Comparable to Hobie Part# 8040211
    BOLT HEX HEAD 5/16-18 X 4.50" SS
    Misc
    Clevis Pin 1/4 x .83" Murrays Part# 50-8020391 Hobie® factory clevis pin measures 1/4" diameter x .8285" grip length (shoulder to the split ring hole).
    CLEVIS PIN 1/4 X .83"
    Hobie
    3/16 X 1-1/4" Clevis Pin Murrays Part# 22-9807 Stainless steel clevis pin. Measurement is 3/16" diameter x 1-1/4" grip length (shoulder to the split ring hole). Can replace Hobie Part# 8020340 Hobie Wave Mast Head Sheave Pin
    CLEVIS PIN 3/16 X 1-1/4
    Misc
    Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length. Hobie part number 8020361, 8020381 and 8020380.
    1/4 X 5/8" Clevis Pin Murrays Part# 22-9802 Stainless steel clevis pin. Measurement is 1/4" diameter x 5/8" grip length (shoulder to the split ring hole).  Uses: Most commonly used to connect shrouds and forestays to 7 or 10 hole shroud adjusters on Hobie, Nacra and Prindle catamarans. Hobie 18 gooseneck vertex pin Hobie 18 outhaul car sheave pin Hobie Part# 8020361, 8020381 and 8020380
    CLEVIS PIN 1/4 X 5/8"
    Misc
    Bolt Hex Head 1/4-20 X 5" (Stainless Steel) Murrays Part# 19-2226 Stainless steel 1/4-20 x 5" hex head bolt is used for Hobie® 18 mast rotation arm. Use #19-2516 nut. Equivalent to Hobie® Part# 8040111
    BOLT HEX HEAD 1/4-20 X 5" (SS)
    Misc
    Bolt Hex Head 5/16-18 X 3.75 Stainless Steel Murrays Part# 19-2235 Stainless steel 5/16-18 x 3-3/4" hex head bolt Equivalent to Hobie Cat® item #8040381
    BOLT HEX HEAD 5/16-18 X 3.75" SS
    Misc
    Harken Calibration Strip Murrays Part# 28-2306 This handy, self-stick scale takes the guesswork out of setting the downhaul. The scale is marked in 1/2" increments to 10". The sticker can also be used as an outhaul scale, or jib track measurement guide. Features both vertical and horizontal numbers so it can be used on the mast or the crossbar.
    HARKEN CALIBRATION STRIP
    Harken
    Bolt Hex Head 1/4-20 X 4.5" (Stainless Steel) Murrays Part# 19-2227 Stainless steel mast bolt for Hobie® 20 is 1/4-20 x 4-1/2" long. Also fits Hobie® 17/20 and Nacra mast rotation arm (#25-3040)
    BOLT HEX HEAD 1/4-20 X 4.5" (SS)
    Misc
    Clevis Pin 1/4X3/8 Murrays Part# 50-8020371 This is commonly used for Hobie Rigging parts. It has a 3/8" grip length. You can also use the 1/2" grip length pins also. Hobie Part# 8020371 or 8020370
    CLEVIS PIN 1/4 x 3/8"
    Hobie
    3/16 X 7/8" Clevis Pin Murrays Part# 22-9806 3/16 x 7/8 Clevis Pin.  H16 gooseneck shackle clevis pin. Hobie Part# 8020061
    CLEVIS PIN 3/16 X 7/8"
    Misc
    3/16 X 1/2" Clevis Pin Murrays Part# 22-9801 Stainless steel clevis pin measures 3/16" diameter x 1/2" grip length (shoulder to the split ring hole). Prindle / Nacra Part# 9412 Compare to Hobie Cat® Part# 8020041
    CLEVIS PIN 3/16 x 1/2"
    Misc
    Recently viewed