Sailboat rigging, Hobie, Nacra, Prindle, Sol cat, Dart, and more. Made to order. Murrays.com

Rigging

477 products

    Murrays rigging is made to order in Carpinteria California by seasoned rigging professionals using premium materials and tooling.  All made to factory spec lengths.  We specialize in Hobie, NACRA, and Prindle rigging.  Main and jib sheets, halyards, shrouds, bridles, forestay, trapeze wires, diamond wires.  Main Halyard, jib halyard, Aussie forestay, Hobie 16 shroud, Hobie 16 bridles, Hobie diamond wires, roller furling jib

    477 products
    H21 Special Edition Jib Halyard with Shackle Murrays Part# 002-0586-00 Jib halyard with shackle for Hobie® 21SE (Special Edition) is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
    H-21SE JIB HALYARD WITH SHACKLE
    Murrays Sports
    H21 Special Edition Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-0505-12 Single shroud (sidestay) for Hobie® 21 Special Edition has hydraulically swaged fittings for a cleaner, stronger shroud. It is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Note: The H21SE is differentiated by its 10' beam and lack of a front trampoline.
    H-21SE SHROUD 5/32" BLACK WIRE ROLLER SWAGED
    Murrays Sports
    H21SE Upper Forestay 5/32" Wire Murrays Part# 002-0535-02 Black upper forestay for Hobie® 21 Special Edition is constructed to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.
    H-21SE UPPER FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    The Murrays Hobie Getaway line package contrains all the lines on a Hobie Getaway. The Main and Jib sheets are Robline Neptune 500 and the control lines are Pelican VLS, Very Low Stretch.
    H-GETAWAY LINE PACKAGE
    Murrays Sports
    Hobie 16 Aussie jib halyard kit
    Hobie 16 aussie jib halyard kit
    H16 AUSSIE JIB HALYARD KIT
    Murrays Sports
    This is for use on the classic style Hobie 16 jib halyard system with a short upper forestay and metal pulley up near the mast tang that was standard in the 70s, 80s and early 90s. There are 2 styles of Hobie 16 jib halyard. This wire Hobie 16 jib halyard works with the old style upper and lower forestay and the metal halyard pulley. The 2nd style is the Aussie jib halyard with it's parallel forestay and jib halyard that became stock in the mid 1990s. Compare to Hobie Part# 20661001
    H16 JIB HALYARD WITH LINE
    Murrays Sports
    Hobie 16 Main Halyard Non-Comptip is a wire halyard for the all-aluminum mast (non Comp-Tip) Hobie 16 and is used to raise the main sail. Constructed to factory specifications, and includes a 2nd stopper as a reef point stopper. This is the standard halyard for Hobie 16's with an all aluminum mast which were standard before 1986. Hobie part number 20651011
    H16 MAIN HALYARD WITH LINE (NON-COMPTIP)
    Murrays Sports
    Harken 16mm Block-Swivel Murrays Part# 28-0417 The Harken air block offers a very high load in an extremely lightweight block. The block itself is only 1-13/16" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 750 lb. breaking strength; 5/32" shackle pin diameter. Harken Part# 417
    HARKEN 16MM BLOCK-SWIVEL
    Harken
    Harken 16mm Single Murrays Part# 28-0404 The Harken air block offers a very high load in an extremely lightweight block. Excellent for control lines. The block itself is only 1-1/8" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 1200 lb. breaking strength.
    HARKEN 16MM SINGLE
    Harken
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    Harken 29mm Wire Bullet Block-Swivel Murrays Part# 28-0183 Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control lines applications. ire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance.
    HARKEN 29MM WIRE BULLET BLOCK-SWIVEL
    Harken
    Harken 40mm Block - Swivel Murrays Part# 28-2636 Carbo AirBlocks® are 60% stronger and 30% lighter than Harken's classic blocks. Use the 40mm Carbo for jib and mainsheet systems on high-performance dinghies and for loaded control lines on small keelboats.
    HARKEN 40MM BLOCK-SWIVEL
    Harken
    Harken 40mm Zircon Catamaran Mainsheet System Murrays Part# 28-2801 This new, more compact Zircon ceramic bearing mainsheet system is a testimonial to the power of collaboration. The previous generation of GP mainsheet system had become the standard among catamaran sailors at the highest levels.
    HARKEN 40MM ZIRCON CATAMARAN MAINSHEET SYSTEM
    Harken
    Harken 4:1 Main Sheet System Murrays Part# 28-041-57b The Murrays Hobie low profile 4:1 main sheet system for the Hobie Wave and Hobie 14.  By Adding a fairlead and a singel block to the back side of the cleat on the base block we have made a low profile main sheet system.
    HARKEN 4:1 MAIN SHEET SYSTEM
    Harken
    57mm Harken Ratchamatic Block — Swivel, Becket, Cam Cleat Murrays PN 28-2628 ​The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. Harken Part No. 2628​ HOBIE 18 JIB SHEET BLOCK - HARKEN 60330041
    HARKEN 57MM RATCHAMATIC - SWIVEL, BECKET, CAM CLEAT
    Harken
    Harken 57mm Ratchamatic HTE Block-Swivel, 1.5x Grip Murrays Part# 28-2165HTE ​The Harken Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless. The spring on the HTE (high-threshold engage) version of the 57 mm Carbo Ratchamatic blocks was made stiffer to delay the point where the ratchet engages, allowing the block to run free more of the time
    HARKEN 57MM RATCHAMATIC HTE BLOCK-SWIVEL, 1.5X GRIP
    Harken
    Harken 57mm Ratchet Block - Swivel, Becket, Cam Cleat Murrays Part# 28-2139 Harken 57mm jib block is great for use on almost all Hobie Cat, Nacra and Prindle. Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing. Specifications Sheave diameter: 2-1/4" Length: 4-15/16" Weight: 9 oz Shackle pin diameter: 3/16" Maximum line diameter: 3/8" Maximum working load: 600 lb. Breaking load: 1500 lb.
    HARKEN 57MM RATCHET BLOCK- SWIVEL, BECKET, CAM CLEAT
    Harken
    HARKEN 57MM TRIPLE RATCHET BLOCK-SWIVEL, CAM CLEAT
    Harken
    Harken 8mm Bow Shackle Murrays Part# 28-2117 The Harken 8mm Bow Shackle is a forged stainless steel shackle that is polished to a high luster and stamped with the screw pin diameter. Bow shackles are best for multidirectional loads. Their large interior opening allows plenty of articulation especially when attached to a round bail.
    HARKEN 8MM BOW SHACKLE
    Harken
    Harken 29mm Stand-up Block Murrays Part# 56-31297 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.  Specifications: 330 lb. SWL 1000 lb. breaking strength 5/16" maximum line diameter 1-1/8" sheave diameter 2-3/16" long Harken Part #349 Nacra Part# 31297
    HARKEN CARBO STANDUP FIXED 29MM
    Harken
    Harken Sail Chafe Protector Murrays Part# 28-0285 Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    Hi-Low Trapeze Adjustment Kit with Handle Murrays Part# 001-1140 Simple and adjustable on the fly, with constant upward tension on the trapeze ring and separate on-the-wire height adjustment. Easy to hook up and hike out with no initial adjustments. Very low stretch lines and Ronstan® turning blocks and aluminum Clamcleats® with roller fairleads for 2:1, easy-pull, easy-release height adjustment. Crew can move fore or aft while maintaining proper height. Constant, smooth-action tension on the trapeze ring
    HIGH-LOW TRAPEZE ADJUSTMENT KIT WITH HANDLE
    Murrays Sports
    Murrays Part# 001-1130 Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. We suggest purchasing Can't Miss Rings (#01-0124) to supply a handle down low when needed. Order shock cord separately
    Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. Show with can't miss rings and trap shock cord. Hobie part 1204
    HIGH-LOW TRAPEZE ADJUSTMENT KIT: NO CUT
    Murrays Sports
    H16/18 Jib Halyard Block Assembly Murrays Part# 50-20240001 Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2". Hobie part# 20240001
    Hobie 16 forestay and jib halyard parts chart
    HOBIE 16/18 JIB HALYARD BLOCK ASSEMBLY
    Hobie
    Hobie FX One Shroud Bare
    Hobie
    HOBIE HALYARD SHACKLE Replacement Hobie halyard shackle for Hobie cat main halyards. Used on the Hobie Wave, Getaway, 14, and 16. The keeper pin is contained so you can't drop the pin in the water or sand and loose it. Hobie part number 10670000
    HOBIE HALYARD SHACKLE
    Hobie
    HOBIE JIB HALYARD BLOCK SHEAVE Murrays PN 50-61260000 Hobie® factory replacement sheave for jib halyard block. Used on Hobie 16s and 18s. Hobie part number 61260000 and 61260010
    HOBIE JIB HALYARD BLOCK SHEAVE
    Hobie
    H18 Nylon Roller Furler Sleeve Murrays Part# 50-61940000 Hobie® factory replacement nylon sleeve for roller furling assembly. Hobie Part# 61940000
    HOBIE NYLON ROLLER FURLER SLEEVE
    Hobie
    Roller Furler Drum Ball Bearing Murrays Part# 50-61670000 Hobie® factory replacement bearing for Hobie roller furler. A total of 18 ball bearings are required per furler.
    HOBIE ROLLER FURLER BEARING
    Hobie
    HOBIE ROLLER FURLER DRUM ASSEMBLY
    Hobie
    Hobie Stainless Steel Roller Furler Sleeve Murrays Part# 50-61950001 Hobie Roller Furler Sleeve is a Hobie factory replacement stainless steel roller furler sleeve. Hobie Part# 61950001
    HOBIE ROLLER FURLER SLEEVE (SS)
    Hobie
    Out of Stock
    The tune-up kit for Hobie® roller furling drum 61900000 includes all of the items that commonly wear or break (bearings, bearing cage, nyliner, nylon sleeve, darby rings, spool and housing). Murrays.com
    HOBIE ROLLER FURLER TUNE-UP KIT
    Hobie
    Out of Stock
    HOBIE ROLLER FURLING DRUM 1" NYLINER
    Hobie
    Out of Stock
    Twist Toggle: Hobie/Prindle Murrays Part# 25-3320 Stainless steel twist toggle is the standard equipment connection between the shroud anchor pin and shroud adjuster on many catamarans. The twist toggle acts as a universal joint to help eliminate binding. Hobie Cat® item #20210000.
    HOBIE/PRINDLE TWIST TOGGLE
    Hobie
    Inter 20 Jib Halyard Wire Murrays Part# 002-5483-80 Jib halyard wire for Inter 20 is constructed to factory specifications.
    INTER 20 JIB HALYARD WIRE
    Murrays Sports
    Inter 20 Roller Furling Forestay 5/32" Black Wire Murrays Part# 002-5445-32 Forestay for Inter 20 with roller furling jib is constructed of 5/32" black-coated wire to factory specifications.
    INTER 20 ROLLER FURLING FORESTAY 5/32" BLACK WIRE
    Murrays Sports
    Inter 20 Shroud 5/32" Black Wire Roller Swaged Murrays Part# 002-5405-12 Single black shroud for Inter 20 is hydraulically swaged to be clean and strong. Constructed to factory specifications.
    INTER 20 SHROUD 5/32"BLACK WIRE ROLLER SWAGED
    Murrays Sports
    Inter F17 Diamond Wire without Turnbuckle Murrays Part# 002-5294-20 Set of diamond wires for both sides is a continuous wire with one thimble at the bottom. No turnbuckle. Constructed to factory specifications.
    INTER F17 DIAMOND WIRE WITHOUT TURNBUCKLE
    Murrays Sports
    JIB CLEW BLOCK KIT
    Murrays Sports
    Key-Ball Can't Hurt Connectors Murrays Part# 001-1213 This pair of connectors is designed for use with the carbon Key-Hole buckle #01-0311. Can't Hurt rings are a light and flexible alternative to "hard" stainless steel dogbones. Black high pressure nylon tubing covers 1/8" (1x19) stainless wire.
    KEY-BALL CAN'T HURT CONNECTOR
    Murrays Sports
    Recently viewed