NACRA

330 products

330 products

Sort

NACRA 15 LOGO STERN STICKER

NACRA MAIN HALYARD HOOK SWIVEL

NACRA MAINSAIL FEEDER

Nacra Shroud Eye Washer

Murrays Part# 56-31394

Shroud eye washer compatible with Nacra 15, Nacra F16, Nacra 17, Nacra F18 Infusion, Nacra F20 Carbon

NACRA SHROUD EYE WASHER

NACRA SMALL RACE SNUFFERBAG

Nacra Trampoline Tie Rod

Murrays Part# 56-32180

The NACRA Trampoline Tie Rod 8mm 176cm, that can be used for the Nacra 460, F16 and the NACRA 17.

NACRA TRAMPOLINE TIE ROD

NACRA CROSSBAR REAR END CAP

Nacra Spinnaker Tapered Halyard F20C

Murrays Part# 56-50014

Spihalyard tapered Nacra 20 (blue/white), , has a SSR basics, made by Alpha Ropes. Looking to the construction of the line, it's single braid, 16 strand (8x2), mix DyneemaÂ® Sk78 / CorduraÂ®. This line is not ready for kinking and is excellent for sheets. A advantage of this line, its soft while kept in your hands.

NACRA F20C SPINNAKER TAPERED HALYARD

Nacra Rudder Casting Lower MKii

Murrays Part# 56-40100-3

NACRA RUDDER CASTING LOWER MKIII

Nacra Compression Sleeve

Murrays Part# 56-2506

The Nacra/Inter Compression Sleeve slips over the Nacra/Inter mast support rod between the nuts and washers to protect the front crossbar. The anodized aluminum tube measures 3-3/4" long x 5/8" ID.

Performance Sports Factory item #2506

NACRA COMPRESSION SLEEVE

Nacra Gudgeon Slotted 6.0NA F18

Murrays Part# 56-1005

Nacra 6.0NA slotted gudgeon is Performance Sports factory item# 1005

NACRA SLOTTED GUDGEON

Rudder Bolt Base Inter
Murrays Part# 56-F188
1/4-20 x 2" FHMS rudder bolt (base) for all Nacra Inters.

NACRA RUDDER BOLT BASE

Hex Bolt 3/8 X 4.25"

Murrays Part# 56-F142

3/8" x 4-1/4" hex head bolt is for Prindle front crossbar

Performance Sports factory item# F142

PRINDLE HEX BOLT 3/8 X 4.25"

NACRA/PRINDLE BOLT FOR GUDGEON 1/4-20X1.25"

Nacra Forestay Adjuster with V-Jam Cleat
Murrays Part# 56-9924
Inter 20 Forestay Adjuster with V-Jam Cleat Inter with Roller Furler

NACRA FORESTAY ADJUSTER WITH V-JAM CLEAT

Spreader Bar Forward

Murrays Part# 56-9921

Forward spreader bar for Nacra 6.0NA (North American)

Nacra Sailing factory item# 30330

NACRA SPREADER BAR FORWARD

N17 Snuffer Pole Holder Ring

Murrays Part# 56-9653

Snuffer pole holder ring for Nacra 17. The three small rings are for attaching the pole stay wire and pole bridle wires.

Performance Sports factory item# 9653

NACRA 17 SNUFFER POLE HOLDER RING

GOOSENECK 'U' BRACKET

Murrays Part# 56-7810

Prindle Gooseneck 'U' Bracket

Gooseneck "U" bracket fits Nacra 5.2 and all Prindles.

Nacra Sailing factory item# 30980

PRINDLE/NACRA GOOSENECK 'U' BRACKET

Rotator Bolt Reinforcement Plate

Murrays Part# 56-6821

Rotator bolt reinforcement.

Performance Sports factory item# 6821

ROTATOR BOLT REINFORCEMENT PLATE

P18/18.2/19 Mast Hound

Murrays Part# 56-6806

Mast Hound for P18, 18-2 and P19

Prindle Part# 6806

PRINDLE 18/18.2/19 MAST HOUND

Mast Head Casting With Wire Halyard

Murrays Part# 56-6552

Performance Sports factory Nacra mast head casting for early Nacras that had wire main halyards.

NACRA MAST HEAD CASTING WITH WIRE HALYARD

Rudder Lock Release Strap

Murrays Part# 56-4010

This is one of two plates used in each rudder assembly on a Prindle beach cat. This is part of the internal assembly that moves up and down as part of the rudder pull up/down system. The Prindle Rudder Lock Release Strap is works on all Prindles.

Nacra sailing factory item# 30415

Prindle Part# 4010

PRINDLE RUDDER LOCK RELEASE STRAP

Inter Front Crossbar Endcap Casting-Left

Murrays Part# 56-2526

Nacra Inter Front Crossbar Endcap Casting-Left Fits all Inters, Inter 18 Inter 20

NACRA FRONT CROSSBAR CASTING END CAP-LEFT

Nacra Crossbar Bolt Chip

Murrays Part# 56-2510

The Nacra Crossbar Bolt Chip is for beam mounting on Prindles and Nacras.

Nacra Sailing factory item# 30069

Prindle item# 2510

NACRA CROSSBAR BOLT CHIP

PVC Centerboard Pivot Tube

Murrays Part# 56-1029

PVC centerboard pivot tube is Performance Sports factory item #1029

PVC CENTERBOARD PIVOT TUBE

Nacra Rudder Hold Down

Murrays Part #56-1002

Rudder hold down for Nacras

Nacra Sailing factory item# 30002

NACRA RUDDER HOLD DOWN

Nacra Tapered Mainsheet 1:12

Murrays Part# 56-50023

This mainsheet 1:12 (red), has a Dcup kmix basics, made by Alpha Ropes. The construction of the line is double braid, 12 strand coated, DyneemaÂ® Sk78 core, 24 plait mix with a HT Polyester / Cordura cover. This all round line, is ready to splice of taper and excellent for sheets, halyards and control lines.

Mainsheet 1:12 is provide with a tapering and splittale. The advantage of the tapering; there is less resistance while trimming the mainsheet.

NACRA TAPERED MAINSHEET 1:12

Small Mast Tang

Murrays Part# 56-6607

Stainless steel mast tang with four mounting holes is used for jib halyard or mounting spinnakers on Nacra cats. Use four #19-5031 rivets and #19-5020 casings for installation.

Nacra part# 6607

NACRA SMALL MAST TANG

NACRA MAST ROTATOR WISHBONE BARE

NACRA ASSEMBLED MAST ROTATOR WISHBONE

Nacra Rudder Pivot Bolt 1/4-20"

Murrays Part# 56-F191

Countersunk rudder pivot bolt measures 1/4-20 x 1-7/8"

NACRA RUDDER PIVOT BOLT 1/4-20"

NACRA DOLPHIN STRIKER ROD

NACRA Dolphin Striker Rod - Old Style

This 13" stainless steel mast support rod with 1/2" diameter has 13 threads per inch (TPI). For older Nacras with round crossbars built before 1983. Does not include nuts or washers. Performance Sports factory item #C602. Before assembly, use grease or anti-seize on threads to prevent thread galling. Limited to stock on hand.

NACRA DOLPHIN STRIKER ROB-OLD STYLE

Jib Tack Hanger

Murrays Part# 56-9890

Jib tack hanger for Nacras

Nacra Sailing factory item# 30325

NACRA JIB TACK HANGER

NACRA 6.0NA JIB SAIL RACE (WHITE)

N5.2/5.5/5.8 Wide Gudgeon

Murrays Part# 56-1010

Wide gudgeon fits Nacra 5.2, 5.5, 5.8 and 18-square

Nacra Sailing factory item# 30006

NACRA WIDE GUDGEON

NACRA GOOSENECK BASE DS MAINSAIL

NACRA 5.7 FRONT CROSSBAR COMPLETE-USED

Nacra Forestay Adjuster with Eye

Murrays Part# 56-30324

NACRA FORESTAY ADJUSTER WITH EYE

Fairlead High Roller Kit

Murrays Part# 56-9954

Mounted on a mainsheet base block, plastic spacers provide a smooth surface to guide the line for the fairlead. Kit includes one pair of spacers with screws and nuts.

NACRA F18 FAIRLEAD HIGH ROLLER KIT

Previous 1 2 3 4 5 6 … 9 Next

Recently viewed

NACRA