NACRA

330 products

    330 products
    Out of Stock
    N15 Mylar Mainsail-White

Murrays Part# 56-60295-01



Nacra 15 mainsail is made with scrim mylar. Sail comes without battens
    NACRA 15 MYLAR MAINSAIL-WHITE
    NACRA
    $1,800.00
    Out of Stock
    NACRA F20C COMPRESSION POLE (2014 & UP)
    NACRA
    $96.00
    Out of Stock
    N15 Jib Sail-White

Murrays Part# 56-60296-01



Nacra 15 Jib Sail is made with scrim mylar and comes including battens
    NACRA 15 JIB SAIL-WHITE
    NACRA
    $700.00
    Nacra Ring

Murrays Part# 56-30702



Details: 3x20mm Stainless Steel
    NACRA RING
    NACRA
    $2.50
    Out of Stock
    N15 Boom

Murrays Part# 56-32058



Nacra 15 aluminum boom for mainsail
    NACRA 15 BOOM
    NACRA
    $300.00
    Out of Stock
    NACRA 15 TILLER TIE BAR ADJUSTABLE
    NACRA
    $175.00
    Out of Stock
    Endcap Bowsprit Internal System

Murrays Part# 56-30786



This endcap is used on the Nacras with the internal tackline system of the spinnaker.
    NACRA ENDCAP BOWSPRIT INTERNAL SYSTEM
    NACRA
    $36.00
    Nacra Bridle Bow Eye

Murrays Part# 56-30036
    NACRA BRIDLE BOW EYE
    NACRA
    $17.50
    H21 Special Edition Bridle 5/32" Wire

Murrays Part# 002-0515-22



One bridle for Hobie® 21SE (Special Edition) is constructed of 5/32" wire to factory specifications.

The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front trampoline.

Use this page to order product numbers:

002-0515-21 White
002-0515-22 Black
    NACRA F18 BRIDLE 5/32" BLACK WIRE
    NACRA
    $30.00
    Out of Stock
    Nacra F18inf MKII Daggerboard

Murrays Part# 56-31232
    NACRA F18INF MKII DAGGERBOARD
    NACRA
    $1,700.00
    Out of Stock
    NACRA F20C FULL BOAT COVER
    NACRA
    $1,375.00
    Out of Stock
    Nacra F20C Aluminum Adjustable Tiller Crossbar

Murrays Part# 56-31152



The adjustable tiller tie bar, when delivered it comes including the rubber euro rods for connecting it with the rudders / tiller arms. In the center of the tiller crossbar, the connection part (U-bracket) will also be mounted (not the flex joint).
    NACRA F20C ALUMINUM ADJUSTABLE TILLER CROSSBAR
    NACRA
    $170.00
    Out of Stock
    NACRA BIG F18 INFUSION HULL STICKER
    NACRA
    $45.00
    Out of Stock
    Nacra Inter Front Right Crossbar Endcap Casting

Murrays Part# 56-2525
    NACRA INTER FRONT RIGHT CROSSBAR ENDCAP CASTING
    NACRA
    $40.00
    Out of Stock
    NACRA SMALL LOGO STICKER
    NACRA
    $10.00
    Out of Stock
    Nacra F18 Infusion Stern Sticker (1 Hull)

Murrays Part# 56-40158



Nacra F18 Infusion logo sticker for stern
Size: 350 x 53 mm
Clean the surface before attachment
    NACRA F18 INFUSION STERN STICKER (1 HULL)
    NACRA
    $9.99
    NACRA LOWER EYE SCREW BUSHING
    NACRA
    $12.50
    Out of Stock
    NACRA MAST HOUND
    NACRA
    $75.00
    N17 Mast Base

Murrays Part# 56-31737-2
    NACRA 17 MAST BASE
    NACRA
    $115.00
    Out of Stock
    NACRA DIAMOND ADJUSTER RIGBOX KIT
    NACRA
    $65.00
    Nacra Spinnaker Bow Eye

Murrays Part# 56-30046
    NACRA SPINNAKER BOW EYE
    NACRA
    $11.00
    Out of Stock
    N15 Spreader Bar Aft Rear

Murrays Part# 56-32440



The NACRA 15 class approved spreader bar for your Nacra 15. This is the aft spreader bar.
    NACRA 15 SPREADER BAR AFT REAR
    NACRA
    $45.00
    Out of Stock
    NACRA F18INF PROGRIP SET BLACK/GRAY (2018 & UP)
    NACRA
    $399.00
    NACRA 15 GRAY DIAMOND PRO-GRIP SET
    NACRA
    $450.00
    Out of Stock
    NACRA SPREADER BAR SCREW UNC
    NACRA
    $25.00
    NACRA 15 FWD SPREADER BAR
    NACRA
    $36.00
    NACRA 5.7 REAR CROSSBAR COMPLETE-USED
    NACRA
    $350.00
    Out of Stock
    NACRA RIVET 4.8x16MM ALUMINUM RVS
    NACRA
    $0.75
    Out of Stock
    Nacra Rigbox Spreader Kit

Murrays Part# 56-40124



Complete kit for attaching your spreaders. Includes pins, rings, cover, adjuster screw ends, and twist wire
    NACRA RIGBOX SPREADER KIT
    NACRA
    $135.00
    Out of Stock
    NACRA F20C AFT SPREADER BAR
    NACRA
    $75.00
    Out of Stock
    NACRA SWIFTCORD 5MM
    NACRA
    $2.00
    NACRA 15 PORT TILLER ARM
    NACRA
    $75.00
    NACRA 15 STARBOARD TILLER ARM
    NACRA
    $75.00
    Nacra Rudder Hold Down

Murrays Part# 56-30002

This part secures the lower rudder casting to the transom of most Nacra Catamarans. The small plate on both sterns which secures your lower rudder casting on the gudgeons, without it your rudders won't stay on all right.

Nacra Part# 30002
    NACRA RUDDER HOLD DOWN
    NACRA
    $9.85
    Nacra Cheek Block 16mm-Harken

Murrays Part# 56-30652

The 16 mm is Harken?s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. Mostly used on bowsprits.
    NACRA CHEECK BLOCK 16MM-HARKEN
    NACRA
    $22.00
    Out of Stock
    Nacra NF20C Race Snufferbag

Murrays Part# 56-31238

This race snufferbag can be used on the Nacra 460, 500, NACRA15 and also on the F16.

The sufferbag race comes with some advantages compared to the standard black. The polyester laminate gives structure to the material resulting in more balance during sailing because the snufferbag keeps it shape. The fabric prevents water from absorbing into snufferbag. This make the snufferbag and spinnaker lighter, what results in easier hosting of the spinnaker.
    NACRA NF20C RACE SNUFFERBAG
    NACRA
    $285.00
    NACRA 17 MKII TRAMPOLINE OEM
    NACRA
    $745.00
    Out of Stock
    NACRA USA MAINSAIL CLASS FLAG
    NACRA
    $95.00
    Nacra Tiller Arm 460 / 500 / 570

Murrays Part# 56-31271
    NACRA 460/500/570 TILLER ARM
    NACRA
    $70.00
    NACRA 500 MESH TRAMPOLINE-BLACK
    NACRA
    $735.00
    Recently viewed