NACRA

330 products

    330 products
    Nacra Roller Furling Rigging Kit Murrays Part# 30-5051 Furl your jib while beached to save your sail from flapping or for when flying a spinnaker. The Nacra Roller Furling Rig Kit Includes: Harken® roller furling drum 10-hole adjuster and luff tension cleat attached Upper and lower forestay with Ronstan® swivel Halyard wire with block and shackle attached Halyard line Harken® Micro cleat with eye strap for front crossbar All fasteners and instillation instructions
    NACRA ROLLER FURLING RIG KIT
    NACRA
    Nacra Rudder Adjustment Eye Nut Murrays Part# 56-F187 This is the lock nut for the adjustment eye on the top of the rudder castings. Infusions MKiii rudder castings stopped using these eyes. Boats sold/ purchased after the release of the F18inf MKiii likely don't have that eye, and so this lock nut is not appropriate. Rudder adjustment eye nut for all Inters is Nacra Sailing factory item #30363. Fits Nacra 460, 500, 570,16,17, F18 Infusion and F20 Carbon
    NACRA RUDDER ADJUSTMENT EYE NUT
    NACRA
    Rudder Bolt Murrays Part# 56-F184 Upper rudder bolt for all Inters. Nacra Sailing factory item# 30362
    NACRA RUDDER BOLT
    NACRA
    Rear Hex Bolt 5/16 X 5.75" Outboard Bolt Murrays Part# 56-F141 5/16" x 5-3/4" hex cap bolt is for Prindle rear crossbar. Performance Sports Factory item# F141
    PRINDLE REAR HEX BOLT 5/16 X 5.75" OUTBOARD BOLT
    NACRA
    PRINDLE DOLPHIN STRIKER ROD 11.25"* The Performance Sports factory #C105 11.25" dolphin striker rod is for Prindle 18-2 or 19 standard length. Order #56-C106 if standard is too short. Limited to stock on hand.
    PRINDLE DOLPHIN STRIKER ROD 11.25"
    NACRA
    Spreader Bar Screw (Fine Threads) Murrays Part# 56-9851-1 Clear anodized, course-threaded diamond wire spreader bar adjustment screw for Nacra and Prindle catamarans.
    NACRA SPREADER BAR SCREW (Coarse THREADS)
    NACRA
    Out of Stock
    Spreader Bar Forward Fine Threaded Murrays Part# 56-9844 Black spreader bar has fine threads that fit newer Nacra cats. Older Nacras may require the purchase of fine-threaded screws (#56-9851; one per side) and aft spreader bar (#56-9843) to ensure compatibility of all components. Nacra Sailing factory item# 30336
    NACRA FORWARD SPREADER BAR (FINE THREADS)
    NACRA
    Out of Stock
    NACRA 12' SNUFFER END POLE BAG
    NACRA
    Gooseneck Box Fitting Murrays Part# 56-7808 Prindle Gooseneck box fitting, part of the boom to mast connection assembly to on Nacra 5.2s and all Prindles. Nacra Sailing Factory item# 30203
    NACRA-PRINDLE GOOSENECK BOX FITTING
    NACRA
    Prindle 18 Mast Base Casting Murrays Part# 56-6805 Black anodized mast base casting fits Prindle 18 only. Nacra Sailing factory item# 30453
    PRINDLE 18 MAST BASE CASTING
    NACRA
    Mast Base Hinge Murrays Part# 56-6516 Mast base hinge plate for Prindle 15 Performance Sports Factory item# 6516
    PRINDLE MAST BASE HINGE
    NACRA
    Mast Head Casting Murrays Part# 56-6002 Mast head casting for Prindle 16 and Escape Nacra Sailing factory item# 30439
    PRINDLE MAST HEAD CASTING
    NACRA
    P-19 Tiller Arm Murrays Part# 56-5009
    PRINDLE 19 TILLER ARM
    NACRA
    Clevis Pin 1/4 x 2-1/4" Murrays Part# 56-4587 1/4 x 2-1/4" clevis pin for all Inter rudder assemblies. Used to hold tiller crossbar assembly to tendon. Nacra sailing factory item# 30428
    CLEVIS PIN 1/4 x 2 1/4"
    NACRA
    Rudder Cheek Casting Murrays Part# 56-4501 This rudder casting from Nacra Australia is an improvement over original equipment. A nylon insert reduces contact of the rudder and casting, resulting in smooth rudder pivoting. The casting includes a built-in roller for the rudder pull-down line that reduces friction, plus replaceable nylon inserts for the rudder pins to reduce wear on the casting. Fits all Nacras (4.5, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI, 18SQ). Nacra Sailing factory item# 30107
    NACRA RUDDER CHEEK CASTING
    NACRA
    Rear Crossbar Casting End Cap-Right Murrays Part# 56-3525 Nacra Inter Endcap Casting-Right Fits all Inters Inter 18 Inter 20
    NACRA REAR CROSSBAR CASTING END CAP-RIGHT
    NACRA
    Nacra Hammock Hook Murrays Part# 56-1034 Hammock hook (sideloader) for Nacra 5.2, 5.5, 5.8, 6.0 and 18SQ Nacra Sailing factory item# 30013
    NACRA HAMMOCK HOOK
    NACRA
    Nacra Side Loader Murrays Part# 56-1018 Side loader holds daggerboard in place Nacra Sailing factory item #30008.
    NACRA SIDE LOADER
    NACRA
    Out of Stock
    NACRA F18 INFUSION MK2 TRAMPOLINE-BLACK
    NACRA
    Save $55
    Replacement part for the adjustable trapeze system found on modern NACRA catamarans. Applications: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS NACRA Part # 30938
    NACRA TRAPEZE STOP
    NACRA
    3/16" Eye Strap Murrays Part# 56-3008
    3/16" EYE STRAP
    NACRA
    Out of Stock
    Mast Over Rotator Murrays Part# 56-9866 This is the big wish bone rotator that goes out in front of the mast. Most have been removed or retrofitted, but we have a couple left if you're hunting for one! Nacra part# 9866
    NACRA MAST OVER ROTATOR
    NACRA
    Out of Stock
    NACRA UPPER RUDDER CASTING MKII WITHOUT TILLER ARM
    NACRA
    Main Halyard Hook Murrays Part# 56-6812 Main halyard lock (hook) or all Prindles and older Nacras. Nacra Sailing factory item# 30192
    PRINDLE/NACRA MAIN HALYARD HOOK
    NACRA
    M8 x 35mm TORX COUNTERSUNK BOLT
    NACRA
    Inter Rudder Eye Adjustment Screw Murrays Part# 56-1000 Rudder adjustment eye screw for all Inters Nacra Sailing factory item #30000
    NACRA INTER RUDDER EYE ADJUSTMENT SCREW
    NACRA
    Out of Stock
    Narrow Gudgeon Murrays Part# 56-1011 Narrow gudgeon fits Nacra 5.0, 5.7, 6.0 and Prindle 18-2 and 19 Nacra Sailing factory item# 300007
    PRINDLE/NACRA NARROW GUDGEON
    NACRA
    PRINDLE 15, 16, 18 DOLPHIN STRIKER ROD
    NACRA
    Bow Tang Murrays Part# 56-1810 Bow tang for Prindle 15, 16, 18 and Escape Nacra Sailing factory item# 30386
    PRINDLE/ESCAPE BOW TANG
    NACRA
    Nacra Boom Endcap Murrays Part# 56-31166 The boom endcap 40mm x 2mm, this is the round endcap used on all standard boom (non decksweeper).
    NACRA BOOM ENDCAP
    NACRA
    NACRA FORWARD SPREADER BAR
    NACRA
    Out of Stock
    N5.5/5.8/P18.2 Jib Track 18" Murrays Part# 56-1910 Nacra Jib Track 18" Standard on Nacra 5.5SL, 5.7, and 5.8 as well as Prindle 18-2 and 19.
    NACRA 5.5/5.8/P18.2 JIB TRACK 18"
    NACRA
    Out of Stock
    NACRA 5.0/5.7 LONG RUDDER
    NACRA
    NACRA F18INF TILLER ARM-PORT
    NACRA
    Nacra PVC Ball Carbon Tiller Extension Murrays Part# 56-32460
    NACRA PVC BALL CARBON TILLER EXTENSION
    NACRA
    NACRA CONNECTIONPART TILLER/JOYSTICK FLEX
    NACRA
    Nacra Rudder Casting Lower Eye Screw Wide Murrays Part# 56-31706 Rudder casting lower eye screw wide
    NACRA RUDDER CASTING LOWER EYE SCREW WIDE
    NACRA
    Nacra Compression Pole Base Murrays Part# 56-31236 The base on the bowsprit for the compression pole.
    NACRA COMPRESSION POLE BASE
    NACRA
    Nacra U-Bracket Bolt Murrays Part#  56-31464 Bolt pan head 1/4 x 1/2" UNC for boom U-bracket. Bolt is also used for Wingseat frame connection
    NACRA U-BRACKET BOLT
    NACRA
    Out of Stock
    Nacra Jib Car Front Beam Murrays Part# 56-30332 Jib car that can be positioned on the front cross bar
    NACRA JIB CAR FRONT BEAM
    NACRA
    Recently viewed