NACRA Sailing

NACRA Sailing

194 products

    Murrays builds and imports parts for NACRA catamarans.  NACRA stands for North American Catamaran Racing Association, but now they are built and distributed out of Europe.  Nacra sailboats have a long pedigree in racing and were the Olympic multihull sailboat in 2020 and 2024.  Murrays makes NACRA rigging in California and sources parts from around the world.

    194 products
    Rudder Eye Screw Wide With Bushing Murrays Part# 56-32055 The screw which is fitted in your lower casting (Until MK2), this screw including the bushing can be adjusted for the rake of the rudder.
    NACRA RUDDER EYE SCREW WIDE WITH BUSHING
    NACRA
    Nacra Spring Pin 1/8 x 7/8 Murrays Part# 56-31389 Spring pin 1/8 x 7/8
    NACRA SPRING PIN
    NACRA
    Out of Stock
    NACRA RUDDER ROLLER UPPERCASTING
    NACRA
    NACRA UPPER RUDDER CASTING INSERT
    NACRA
    NACRA 15/F16MKII MASTHEAD
    NACRA
    Out of Stock
    NACRA 15 NYLON SPINNAKER HOLMENKOL-BLUE
    NACRA
    N-15 FORESTAY-BARE WIRE
    Murrays Sports
    N15 Shroud Murrays Part# 56-32231-2 Shroud NACRA 15 for staymaster 4mm, is a single shroud for the NACRA 15. The race shroud is provided with a fitting for the Staymaster. When you are looking for a set of shrouds, ordering two pieces is necessary.
    N-15 SHROUD-BLACK WIRE
    Murrays Sports
    Out of Stock
    NACRA 15 DAGGERBOARD PORT SIDE
    NACRA
    Out of Stock
    NACRA 15 DAGGERBOARD STARBOARD SIDE
    NACRA
    Out of Stock
    NACRA 15 COMPRESSION POLE
    NACRA
    N15 Bowsprit Murrays Part# 56-32063 Spi pole Nacra 15, is suitable for youth Olympic Nacra 15. On the critical points of the spi pole, there is an inner tube for extra support. Supplied with spi pole bridle wires, so the pole is ready to sail.
    NACRA 15 BOWSPRIT
    NACRA
    Out of Stock
    N-15 BOWSPRIT BRIDLE-BARE WIRE
    Murrays Sports
    Out of Stock
    N15 Mylar Mainsail-White Murrays Part# 56-60295-01 Nacra 15 mainsail is made with scrim mylar. Sail comes without battens
    NACRA 15 MYLAR MAINSAIL-WHITE
    NACRA
    Out of Stock
    N15 Jib Sail-White Murrays Part# 56-60296-01 Nacra 15 Jib Sail is made with scrim mylar and comes including battens
    NACRA 15 JIB SAIL-WHITE
    NACRA
    Out of Stock
    Clam Cleat CL277 Murrays Part# 56-12862 The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Small, neat and lightweight. Advanced tooth technology to hold all types of small rope. Integral becket allows riggging with a 2:1 ratio, without extra parts. Applications include Canoes & Kayaks (seat & rudder lines); Dinghy tiller lines. Manufactured from aluminum for light weight and durable performance.
    NACRA F18 INFUSION CLAM CLEAT CL277
    Clamcleat
    Out of Stock
    F18 Infusion DS Mainsail Pentex-Black Murrays Part# 56-60318-05
    F18 INFUSION DS MAINSAIL PENTEX-BLACK
    NACRA
    Out of Stock
    F18 INFUSION DS MAINSAIL PENTEX-WHITE
    NACRA
    Out of Stock
    F18 INFUSION MAINSAIL PENTEX-SLIVER
    NACRA
    Out of Stock
    F18 INFUSION MAINSAIL PENTEXT-WHITE
    NACRA
    Out of Stock
    F18 INFUSION PENTEX JIB-WHITE
    NACRA
    Out of Stock
    F18 INFUSION SPINNAKER-GREEN
    NACRA
    Out of Stock
    NACRA F18 INFUSION JIB PENTEX-BLACK
    NACRA
    Out of Stock
    NACRA F18 INFUSION MAINSAIL-BLACK
    NACRA
    Out of Stock
    NACRA F18 INFUSION SPINNAKER-GRAY
    NACRA
    Out of Stock
    N15 Boom Murrays Part# 56-32058 Nacra 15 aluminum boom for mainsail
    NACRA 15 BOOM
    NACRA
    Out of Stock
    NACRA 15 TILLER TIE BAR ADJUSTABLE
    NACRA
    Out of Stock
    Endcap Bowsprit Internal System Murrays Part# 56-30786 This endcap is used on the Nacras with the internal tackline system of the spinnaker.
    NACRA ENDCAP BOWSPRIT INTERNAL SYSTEM
    NACRA
    Nacra Bridle Bow Eye Murrays Part# 56-30036
    NACRA BRIDLE BOW EYE
    NACRA
    H21 Special Edition Bridle 5/32" Wire Murrays Part# 002-0515-22 One bridle for Hobie® 21SE (Special Edition) is constructed of 5/32" wire to factory specifications. The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front trampoline. Use this page to order product numbers: 002-0515-21 White 002-0515-22 Black
    NACRA F18 BRIDLE 5/32" BLACK WIRE
    NACRA
    Out of Stock
    Nacra F18inf MKII Daggerboard Murrays Part# 56-31232
    NACRA F18INF MKII DAGGERBOARD
    NACRA
    Out of Stock
    Nacra F18 Infusion Stern Sticker (1 Hull) Murrays Part# 56-40158 Nacra F18 Infusion logo sticker for stern Size: 350 x 53 mm Clean the surface before attachment
    NACRA F18 INFUSION STERN STICKER (1 HULL)
    NACRA
    Out of Stock
    NACRA MAST HOUND
    NACRA
    Out of Stock
    NACRA F18INF PROGRIP SET BLACK/GRAY (2018 & UP)
    NACRA
    Out of Stock
    NACRA DIAMOND ADJUSTER RIGBOX KIT
    NACRA
    Nacra Upper Countersunk Rudder Gudgeon Murrays Part# 56-32077 The original upper rudder gudgeon with countersunk screw holes. A replacement part for your standard Nacra rudder gudgeons. Does not combine with the new lower rudder systems.
    NACRA UPPER COUNTERSUNK RUDDER GUDGEON
    Murrays Sports
    Nacra Shroud Eye Washer Murrays Part# 56-31394 Shroud eye washer compatible with Nacra 15, Nacra F16, Nacra 17, Nacra F18 Infusion, Nacra F20 Carbon
    NACRA SHROUD EYE WASHER
    NACRA
    N15 C-Foil Bearing Keel Murrays part# 56-32235 Nacra Part Number 32235
    N-15 C-FOIL BEARING KEEL
    Murrays Sports
    Out of Stock
    Nacra Furler Tang Upper Murrays Part# 56-30296 To connect your forestay with your furler system. Compatibility: Nacra 500 Nacra 460 Nacra 570 Nacra Part# 30296
    NACRA TANG FURLER UPPER
    NACRA
    N-570 BRIDLE 5/32" BLACK
    Murrays Sports
    Recently viewed