NACRA Sailing

NACRA Sailing

194 products

    Murrays builds and imports parts for NACRA catamarans.  NACRA stands for North American Catamaran Racing Association, but now they are built and distributed out of Europe.  Nacra sailboats have a long pedigree in racing and were the Olympic multihull sailboat in 2020 and 2024.  Murrays makes NACRA rigging in California and sources parts from around the world.

    194 products
    NACRA MAST SUPPORT ROD W/NUTS & WSHR
    Murrays Sports
    Out of Stock
    Spreader Bar Forward Fine Threaded Murrays Part# 56-9844 Black spreader bar has fine threads that fit newer Nacra cats. Older Nacras may require the purchase of fine-threaded screws (#56-9851; one per side) and aft spreader bar (#56-9843) to ensure compatibility of all components. Nacra Sailing factory item# 30336
    NACRA FORWARD SPREADER BAR (FINE THREADS)
    NACRA
    Dolphin Mast Support Pad Murrays Part# 56-2505 Dolphin striker mast support pad fits all Prindle's, Nacra's and Inters. This dolphin striker mast support is also known as a dolphin striker casting. It sits between the dolphin post rod and the dolphin striker rod. Nacra Sailing factory item# 30063.
    PRINDLE/NACRA/INTER DOLPHIN MAST SUPPORT PAD
    NACRA
    NACRA Trapeze Block Replacement part for the adjustable trapeze system found on modern NACRA catamarans. NACRA Part # 30692 Applications: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS
    NACRA Trapeze Block Replacement part for the adjustable trapeze system found on modern NACRA catamarans. NACRA Part # 30692 Applications: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS
    NACRA TRAPEZE BLOCK
    NACRA
    Out of Stock
    NACRA UPPER RUDDER CASTING MKII WITHOUT TILLER ARM
    NACRA
    Lower Diamond Tang Murrays Part# 56-6610 Lower diamond tang for Inter, Nacra 500 and 570 Mount with six #19-5031 rivets Use rivet casings if you want to seal the mast ​Performance Sports Factory item# 6610 Nacra Sailing Part# 30183
    NACRA LOWER DIAMOND TANG
    NACRA
    Out of Stock
    Hobie Universal Hull Cradles Murrays Part# 007-1624 Hobie Cat's universal thermoformed cradles are stronger and less likely to scratch than fiberglass. Carpet provides additional hull protection. The unique wide bottom will fit either a round tube or a flat surface and mounting hardware is included. Pair. Dimensions of inside of cradle: Width: 14-1/2" Depth: 4" Width 1" from bottom: 10-1/4"
    HOBIE UNIVERSAL HULL CRADLES
    Hobie
    NACRA 500 DIAMOND WIRE DBL
    Murrays Sports
    Harken 16mm Eyestrap Block Murrays Part# 28-0442 The 16 mm is Harken’s smallest block. It is perfect for small synthetic control lines found on high-tech dinghies. The patented bearing system uses stainless steel balls in a captive grooved race and has a 250 lb (113 kg) maximum working load. The 442 uses a spacer to keep the line in the sheave during intermittent loading.
    HARKEN 16MM EYESTRAP BLOCK
    Harken
    Harken 29mm Stand-up Block Murrays Part# 56-31297 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.  Specifications: 330 lb. SWL 1000 lb. breaking strength 5/16" maximum line diameter 1-1/8" sheave diameter 2-3/16" long Harken Part #349 Nacra Part# 31297
    HARKEN CARBO STANDUP FIXED 29MM
    Harken
    NACRA FORWARD SPREADER BAR
    NACRA
    NACRA CONNECTIONPART TILLER/JOYSTICK FLEX
    NACRA
    Nacra Rudder Casting Lower Eye Screw Wide Murrays Part# 56-31706 Rudder casting lower eye screw wide
    NACRA RUDDER CASTING LOWER EYE SCREW WIDE
    NACRA
    Nacra Compression Pole Base Murrays Part# 56-31236 The base on the bowsprit for the compression pole.
    NACRA COMPRESSION POLE BASE
    NACRA
    Nacra Mainsail Swivel Halyard Hook Murrays Part# 56-31741 Main halyard hook swivel to be used for the Nacra 15, F16 MKII and Nacra 17.
    NACRA MAINSAIL SWIVEL HALYARD HOOK
    NACRA
    Out of Stock
    Nacra Jib Car Front Beam Murrays Part# 56-30332 Jib car that can be positioned on the front cross bar
    NACRA JIB CAR FRONT BEAM
    NACRA
    N15 Logo Stern Sicker Murrays Part# 56-40150 Nacra 15 logo sticker for stern. Size: 350 x 53 mm Clean the surface before attachment.
    NACRA 15 LOGO STERN STICKER
    NACRA
    Out of Stock
    NACRA MAINSAIL FEEDER
    NACRA
    Nacra Inf-F18 Bridle Bare 5/32 Murrays Part# 002-5815-22 This bridle will fit F18 Infusion Mki MKii and MKiii boats. Due to the variations in production. Please check and confirm your boat's dimensions before ordering. The MKi boat had 5 different factory rigging lengths.
    NACRA INFUSION 18 BRIDLE 5/32" BARE WIRE
    Murrays Sports
    NACRA DOLPHIN MAST SUPPORT ROD
    Murrays Sports
    Nacra Shroud Eye Murrays Part# 56-32338 Details: 7/16UNC 17-4 SS Replacement shroud eye for Nacra beachcats.
    NACRA SHROUD EYE
    NACRA
    Harken 29mm Stand-up Block Murrays Part# 56-31297 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.  Specifications: 330 lb. SWL 1000 lb. breaking strength 5/16" maximum line diameter 1-1/8" sheave diameter 2-3/16" long Harken Part #349 Nacra Part# 31297
    HARKEN 29MM STAND-UP BLOCK
    Harken
    NACRA ASSEMBLED MAST ROTATOR WISHBONE
    NACRA
    Nacra Rudder Pivot Bolt 1/4-20" Murrays Part# 56-F191 Countersunk rudder pivot bolt measures 1/4-20 x 1-7/8"
    NACRA RUDDER PIVOT BOLT 1/4-20"
    NACRA
    NACRA DOLPHIN STRIKER ROD
    NACRA
    Nacra Rudder Adjustment Eye Nut Murrays Part# 56-F187 This is the lock nut for the adjustment eye on the top of the rudder castings. Infusions MKiii rudder castings stopped using these eyes. Boats sold/ purchased after the release of the F18inf MKiii likely don't have that eye, and so this lock nut is not appropriate. Rudder adjustment eye nut for all Inters is Nacra Sailing factory item #30363. Fits Nacra 460, 500, 570,16,17, F18 Infusion and F20 Carbon
    NACRA RUDDER ADJUSTMENT EYE NUT
    NACRA
    Gooseneck Base Fitting Murrays Part# 56-7807 The Prindle Gooseneck base fitting attaches to mast of Prindle 15, 16, 18, 18-2 and 19. Nacra Sailing factory item# 30202
    NACRA - PRINDLE GOOSNECK BASE FITTING
    NACRA
    Harken 16mm Cheek Block Murrays Part# 28-0416 Harken's 16mm check block is a downhaul and turning block and is perfect for small synthetic control lines. 1-13/16" long; 5/8" sheave diameter; 250 lb. SWL; 1200 lb. breaking strength. Use #8 (4mm) RH fasteners. Harken Part# 416
    HARKEN 16MM CHEEK BLOCK
    Harken
    Harken 29mm Wire Bullet Block-Swivel Murrays Part# 28-0183 Low-friction Bullet blocks lead control lines aft. They are compact and lightweight, with fast trim and release under high or low loads. A range of styles lets these blocks adapt to almost all control lines applications. ire Bullet blocks use roller bearings to carry higher loads and feature hardcoat-anodized PTFE impregnated aluminum sheaves for strength and corrosion resistance.
    HARKEN 29MM WIRE BULLET BLOCK-SWIVEL
    Harken
    Harken 16mm Block-Swivel Murrays Part# 28-0417 The Harken air block offers a very high load in an extremely lightweight block. The block itself is only 1-13/16" long. The 5/8" sheave will accept line as large as 7/32". 250 lb. SWL; 750 lb. breaking strength; 5/32" shackle pin diameter. Harken Part# 417
    HARKEN 16MM BLOCK-SWIVEL
    Harken
    Harken 22mm Block-Swivel Murrays Part# 28-0292 Low Friction Micro Blocks are compact and lightweight. They are ideal for sailboards, smaller dinghies and lightly loaded control lines on boats of all sizes.
    HARKEN 22MM BLOCK-SWIVEL
    Harken
    Harken 57mm Quad Block-Swivel Murrays Part# 28-2631 57mm Carbo Blocks have an enormous working range and a very high strength-to-weight ratio. Use with #28-2632 base block for an 8:1 Carbo low-profile mainsheet system.
    HARKEN 57MM QUAD BLOCK-SWIVEL
    Harken
    NACRA SPREADER BAR SCREW UNF
    NACRA
    Out of Stock
    N-15 BRIDLE WIRE
    Murrays Sports
    NACRA ILLUSTRATED PARTS LIST
    Murrays Sports
    Out of Stock
    NACRA F16/18INF TILLER TIE BAR ASSEMBLY
    NACRA
    Out of Stock
    NACRA RUDDER HEAD ROLLER
    NACRA
    Out of Stock
    NACRA RUDDER BASE CASTING
    NACRA
    Out of Stock
    NACRA F18 INFUSION/N20 OLD STYLE RUDDER BLADE
    NACRA
    Out of Stock
    NACRA SPINNAKER POLE CAP FRONT INTER
    NACRA
    Recently viewed