NACRA Sailing

164 products

    164 products
    CAT TRAX WIDE HULL CRADLES
    Cat Trax
    Out of Stock
    Snuffer Sock Mid Pole Murrays Part# 56-9711 A snuffer funnels the spinnaker into the sock to facilitate launching and retrieval, even while sailing a triangular course. Keeps the tramp clean. This snuffer sock holds sail when not in use. Made with lightweight waterproof sail material a neoprene patch under the opening for added stretch and abrasion resistance.
    SNUFFER SOCK MID POLE
    Murrays Sports
    Dolphin Sticker Rod Nut Murrays Part# 56-F151 9/16" stainless nut for Nacra dolphin striker mast support rod. Used on boats built after 1983. Before threading nut onto rod, use grease or anti-seize on threads of rod to prevent thread galling. Performance Sports factory item #F151.
    NACRA DOLPHIN STRIKER ROD NUT
    NACRA
    Nacra Tapered Mainsheet with Splittale 1:10 Murrays Part# 56-50017 The N15 Tapered Mainsheet w/ Splittale 10:1 has a D cup kmix basics, made by Alpha Ropes. The construction of the line is double braid, 12 strand coated, Dyneema® Sk78 core, 24 plait mix with a HT Polyester / Cordura cover.
    NACRA TAPERED MAINSTEET WITH SPLITTALE
    NACRA
    NACRA RUDDER COVER
    NACRA
    Out of Stock
    N-15 MAST COVER
    Murrays Sports
    Nacra Footstrap Set With Bolts Murrays Part# 56-31175 This Nacra footstraps can adjust to the size of your foot. The set comes with 2 footstraps, including the necessary bolts and washer to put them on the boat.
    NACRA FOOTSTRAP SET WITH BOLTS
    NACRA
    NACRA F18 INF DIAMOND WIRE
    Murrays Sports
    NACRA INFUSION 18 FORESTAY 5/32" BARE WIRE
    Murrays Sports
    Out of Stock
    NACRA MAST SUPPORT ROD W/NUTS & WSHR
    Murrays Sports
    Jib Halyard "S" Hook Murrays Part# 56-9937 Jib halyard "S" hook for Nacra F18 Infusion Nacra Sailing factory item# 30334
    NACRA JIB HALYARD "S" HOOK
    NACRA
    Dolphin Mast Support Pad Murrays Part# 56-2505 Dolphin striker mast support pad fits all Prindle's, Nacra's and Inters. This dolphin striker mast support is also known as a dolphin striker casting. It sits between the dolphin post rod and the dolphin striker rod. Nacra Sailing factory item# 30063.
    PRINDLE/NACRA/INTER DOLPHIN MAST SUPPORT PAD
    NACRA
    Out of Stock
    Deluxe Quick Release Pin 1/4 X 1 with Lanyard Murrays Part# 18-4M100 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Uses: Hobie boom Gooseneck quick connection pin on the 14, 16 and 18. Hobie 18 main clew to outhaul car connection pin. Compare to Hobie Cat #20305 PIN, QR 1/4 X 1 CUP Upgrade for Hobie 8020410 and 8020411 clevis pin
    DELUXE QUICK RELEASE PIN 1/4 X 1" WITH LANYARD
    Misc
    NACRA Trapeze Block Replacement part for the adjustable trapeze system found on modern NACRA catamarans. NACRA Part # 30692 Applications: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS
    NACRA Trapeze Block Replacement part for the adjustable trapeze system found on modern NACRA catamarans. NACRA Part # 30692 Applications: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS
    NACRA TRAPEZE BLOCK
    NACRA
    Nacra Rudder Blade Cushion Use these cushions to trim your rudder blades in the casting.
    NACRA RUDDER BLADE CUSHION
    NACRA
    Out of Stock
    NACRA UPPER RUDDER CASTING MKII WITHOUT TILLER ARM
    NACRA
    NACRA BOOM PIN
    NACRA
    Sale
    NACRA F18 INFUSION MK2 TRAMPOLINE-BLACK
    NACRA
    Save $250
    NACRA FORWARD SPREADER BAR
    NACRA
    Rudder Kick-Up Stop Murrays Part# 56-4518 The Nacra Rudder Kick-Up Stop is used on the Nacra 4.5/450, 5.0, 5.2, 5.5SL, 5.7, 5.8NA, 6.0NA, 5.5UNI and 18SQ. Performance Sports factory item# 4518
    NACRA RUDDER KICK-UP STOP
    NACRA
    Replacement part for the adjustable trapeze system found on modern NACRA catamarans. Applications: Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS NACRA Part # 30938
    NACRA TRAPEZE STOP
    NACRA
    NACRA CONNECTIONPART TILLER/JOYSTICK FLEX
    NACRA
    Nacra Rudder Casting Lower Eye Screw Wide Murrays Part# 56-31706 Rudder casting lower eye screw wide
    NACRA RUDDER CASTING LOWER EYE SCREW WIDE
    NACRA
    Nacra Compression Pole Base Murrays Part# 56-31236 The base on the bowsprit for the compression pole.
    NACRA COMPRESSION POLE BASE
    NACRA
    Nacra Boom Endcap Murrays Part# 56-31166 The boom endcap 40mm x 2mm, this is the round endcap used on all standard boom (non decksweeper).
    NACRA BOOM ENDCAP
    NACRA
    Out of Stock
    Nacra Jib Car Front Beam Murrays Part# 56-30332 Jib car that can be positioned on the front cross bar
    NACRA JIB CAR FRONT BEAM
    NACRA
    N15 Shroud 5/32" Race Murrays Part# 002-4805-22 NACRA 15 Shroud 5/32 (4mm) Race (staymaster) to be used with Staymaster style turnbuckles
    NACRA INFUSION F18 RACE SHROUD 5/32" BLACK WIRE
    Murrays Sports
    Nacra Inf-F18 Bridle Bare 5/32 Murrays Part# 002-5815-22 This bridle will fit F18 Infusion Mki MKii and MKiii boats. Due to the variations in production. Please check and confirm your boat's dimensions before ordering. The MKi boat had 5 different factory rigging lengths.
    NACRA INFUSION 18 BRIDLE 5/32" BARE WIRE
    Murrays Sports
    Out of Stock
    NACRA DOLPHIN MAST SUPPORT ROD
    Murrays Sports
    Spreader Bar Forward Fine Threaded Murrays Part# 56-9844 Black spreader bar has fine threads that fit newer Nacra cats. Older Nacras may require the purchase of fine-threaded screws (#56-9851; one per side) and aft spreader bar (#56-9843) to ensure compatibility of all components. Nacra Sailing factory item# 30336
    NACRA FORWARD SPREADER BAR (FINE THREADS)
    NACRA
    Tiller Joint- 3" Urethane Rod Murrays Part# 56-4588 The Nacra Tiller Joint - 3" Urethane Rod is for tiller connections on all Inters, the 500, 570, F18 Infusion and more. The part must be drilled to match your application. Compare to Nacra Part# 4588
    NACRA TILLER JOINT- 3" URETHANE ROD
    NACRA
    Nacra Shroud Eye Murrays Part# 56-32338 Details: 7/16UNC 17-4 SS Replacement shroud eye for Nacra beachcats.
    NACRA SHROUD EYE
    NACRA
    Harken 29mm Stand-up Block Murrays Part# 56-31297 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming.  Specifications: 330 lb. SWL 1000 lb. breaking strength 5/16" maximum line diameter 1-1/8" sheave diameter 2-3/16" long Harken Part #349 Nacra Part# 31297
    HARKEN 29MM STAND-UP BLOCK
    Harken
    NACRA ASSEMBLED MAST ROTATOR WISHBONE
    NACRA
    NACRA DOLPHIN STRIKER ROD
    NACRA
    NACRA SPREADER BAR SCREW UNF
    NACRA
    Out of Stock
    N-15 BRIDLE WIRE
    Murrays Sports
    NACRA ILLUSTRATED PARTS LIST
    Murrays Sports
    NACRA F16/18INF TILLER TIE BAR ASSEMBLY
    NACRA
    Out of Stock
    NACRA RUDDER HEAD ROLLER
    NACRA
    Recently viewed