Murrays.com Hobie shroud, forestay, halyard, mast bearing

Murrays

797 products

Hobie, Nacra and Prindle rigging: shrouds, halyards, bridles, forestays and small parts like mast bearings, trapeze handles, rudder cam kits, rudder pins, righting lines and more.

797 products

Sort

DINGHY GOOSENECK UNIVERSAL CP16-420-FJ-V15

DINGHY GOOSENECK U BRACKET

DINGHY GOOSENECK BRACKET CP16-420-FJ-V15

Stock gooseneck bracket for the following boats: Capri 15, 16, Pre 2010 16.5 , C420, 420, CFJ, FJ, and Vanguard 15

Zim# 20265

Dwyer Part # DH412LP

Laser Performance # 90491

DINGHY GOOSENECK BRACKET CP16-420-FJ-V15

Stock gooseneck bracket for the following boats: Capri 15, 16, Pre 2010 16.5 , C420, 420, CFJ, FJ, and Vanguard 15

Zim# 20265

Dwyer Part # DH412LP

Laser Performance # 90491

DINGHY GOOSENECK BRACKET

Nacra MKi Rudder casting

Hobie Getaway trapeze kit - trapeze wires, handles, adjustment kit and shock cord

Getaway Trapeze Rig Kit

WASHER 8mm X 42mm (BK NYLON)

Used Flysufer Soul 9m with bar

FCS Fin Removal tool

HOBIE WAVE CLASSIC 1-pc TRAMPOLINE

H-17/20 POSITIVE MAST ROTATION

DART-18 FORESTAY 1/8 BARE

DART-18 FORESTAY 1/8" BARE

This "potato chip" (2" OD) pad fits or can be modified to fit almost any main beam extrusion for use with a 3-hole swivel cleat. To modify, put sandpaper on beam and rub base pad to suit and/or fill gap with silicone sealant and allow to dry before securing.

BASE PAD UNIVERSAL 3-HOLE KIT

H-20 JIB BLOCK WIRE (BARBERHLR)

Footstrap Insert 1"

This 1" footstrap insert is the best choice for custom fiberglass or epoxy skinned boards. Use #10 screw (#19-3211) and washer (#19-4011). Also available as a kit (#01-9518) that includes pair of inserts with fasteners.

Sold individually

1" FOOTSTRAP INSERT (EA)

Footstrap Inserts with Screws

Murrays Part# 001-9518

Includes two footstrap inserts, four screws and four washers.

Sold as a pair

FOOTSTRAP INSERT WITH SCREWS (PR)

Inter F17 Diamond Wire without Turnbuckle

Murrays Part# 002-5294-20

Set of diamond wires for both sides is a continuous wire with one thimble at the bottom. No turnbuckle. Constructed to factory specifications.

INTER F17 DIAMOND WIRE WITHOUT TURNBUCKLE

NACRA INTER 18 JIB HALYARD

H21 Special Edition Jib Halyard with Shackle
Murrays Part# 002-0586-00

Jib halyard with shackle for Hobie® 21SE (Special Edition) is constructed to factory specifications.

The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.

H-21SE JIB HALYARD WITH SHACKLE

H21SE Upper Forestay 5/32" Wire

Murrays Part# 002-0535-02

Black upper forestay for Hobie® 21 Special Edition is constructed to factory specifications.

The H21SE is sometimes confused with the H21SC (Sport Cruiser). Please note that the H21SE is differentiated by its 10' beam and lack of a front tramp.

H-21SE UPPER FORESTAY 5/32" BLACK WIRE

H21 Sport Cruiser Bridle 5/32" Wire

Murrays Part# 002-0514-22

One bridle for Hobie® 21SC is constructed of 5/32" wire to factory specifications. Wire has black coating.

The H21SC is sometimes confused with the H21SE (Special Edition). Please note that the H21SC is differentiated by its 8.5' beam, front trampoline and Hobie® 18 rigging.

H-21SC BRIDLE 5/32" WIRE

N-5.7 JIB HALYARD W/SHACKLE

N-5.5SL JIB HALYARD WITH SHACKLE

N6.0 Forestay 5/32" Black Wire

Murrays Part# 002-4645-12

Forestay for Nacra 6.0 is constructed of black-coated 5/32" wire to factory specifications.

N-6.0 FORESTAY 5/32" BLACK WIRE

N-6.0NA BRIDLE 5/32-BLACK WIRE

N-6.0/6.0NA JIB BLOCK WIRE

N-6.0 BRIDLE 5/32 BLACK WIRE

N6.0 Diamond Wire with Turnbuckle

Murrays Part# 002-4694-20

Diamond wire with turnbuckle for Nacra 6.0 is constructed to factory specifications.

N-6.0 DIAMOND WIRE WITH TURNBUCKLE

N5.8 Forestay 5/32" Black Wire

Murrays Part# 002-4545-12

The Nacra 5.8 forestay is constructed to factory specifications from 5/32" black-coated wire.

Their are 2 versions of the Nacra 5.8. The standard 5.8 which is mostly found in Europe and N.A. which is the North American version. The N.A. has a longer forestay that connects to a bridle foil rod instead of bridle wires.

N-5.8 FORESTAY 5/32" BLACK WIRE

N-5.8 DIAMOND WIRE WITH TURNBUCKLE

N-5.8 BRIDLE 5/32 BK

N5.5SL Forestay 5/32" Black Wire 

Murrays Part# 002-4345-12

Forestay for Nacra 5.5SL is constructed to factory specifications from 5/32" black-coated wire.

N-5.5SL FORESTAY 5/32" BLACK WIRE

N-5.5SL JIB BLOCK WIRE

Mast Protector 5" (Aluminum)

Murrays Part# 001-9503

Spread the load over a broad section of mast. 5" aluminum protector is for tight-fitting boom ends. May be required to uphold mast warranty. Limited to stock on hand.

5" ALUMINUM MAST PROTECTOR

Ring Stainless Steel Welded 1/8"x3/4"ID

RING SS WELDED 1/8"x3/4"ID

PRINDLE ESCAPE SHROUD 5/32 BLACK

PRINDLE ESCAPE BRIDLE 5/32-BLACK

PRINDLE ESCAPE FORESTAY 5/32 WITH TURN BUCKLE

PRINDLE 18.2 BRIDLE 5/32-BLACK

N-5.5SL MAIN HALYARD WITH SHACKLE

N-6.0/NA JIB HALYARD

Previous 1 … 13 14 15 16 17 … 20 Next

Recently viewed

Murrays