In Stock

In Stock

2398 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2398 products
    TURNBUCKLE COMPLETE 5/32" HEAVY DUTY
    Murrays Sports
    $64.50
    TURNBUCKLE JAW 1/4 X 28 LH
    Misc
    $23.25
    TURNBUCKLE JAW 1/4 X 28 RH
    Misc
    $23.75
    Ultra Halyard Line 1.6mm
This is a fantastic halyard line for self tacking jib systems that use the small nacra hook.
    Blue Black
    ULTRA HALYARD LINE 1.6mm
    Murrays Sports
    $0.10
    ULTRALIGHT CARBON KITE BAR 50CM
    Misc
    $189.00
    Ultraneema Control Line 3mm Black
Murrays Part# 39-4303bk
3mm Alpha Ultraneema Control Line is a Double braid: 16 strand Dyneema® Sk78 core, HT Polyester cover. It can be good for trampoline lacing or soft attach block mounting on your performance cat.
    ULTRANEEMA CONTROL LINE 3MM
    AlphaRope
    $0.42
    Ultraneema Control Line 5mm Blue
Murrays Part# 39-4305bl
    ULTRANEEMA CONTROL LINE 5MM
    AlphaRope
    $3.50
    UNIVERSAL PIGTAIL-GRAY
    Misc
    $6.00
    Universal Pigtail-Red

Murrays Part# 54-4408-13

The Universal Kite Pigtail is an 6" pigtail with a knot and a knot/loop. The universal pigtail can be used with any kite on any knot/loop combination. They can be used as a knot and loop combination, a loop and loop combination, and you can add a second knot to make a knot and knot combination. The Universal Pigtails can be used to replace your current kiteboarding pigtail set or just a part of it. Typically pigtails are used in sets of 8 with 4 o
    UNIVERSAL PIGTAIL-RED
    Misc
    $6.00
    Catamaran Universal Righting System

Murrays Part# 001-8292

The Universal Righting System is simple and effective with large, 1/2" diameter, black polypropylene righting line that is light and easy to access and grip, even when wet. The line self-returns under the tramp after use. There are no knots to pre-tie or untie. The shock cord and pulleys provided hold line snug and are external, so they are easy to adjust and service. Fits 8' to 8'6" wide catamarans; ideal for boats with flush-deck trampoline.
    UNIVERSAL RIGHTING SYSTEM
    Murrays Sports
    $95.00
    The Surefoot EVA Deck Grip Kit is back, now with 3m peel and stick backing on diamond-textured EVA foam. Ideal rail and or deck grip on all dinghies and catamarans. EVA traction pads offer grip, padding and a long life span. EVA is a lightweight foam doesn’t absorb water the way carpet does, so there is minimal weight when it gets wet!

Universal Catamaran Kit: Six 3" x 40" peel and stick foam grip strips - will work on virtually any Prindle, Nacra, or any other boat class for railing traction.
    Black Blue Grey Red
    UNIVERSAL SUREFOOT EVA KIT
    Murrays Sports
    $95.00
    US Sabot Line Package SBSS

Murrays Part# 001-39US

Includes the following lines:

Painter

Mainsheet

Outhaul

Traveler

Cunningham

3 vang lines

Dagger hold down
    US Sabot Line Package SBSS

Murrays Part# 001-39US

Includes the following lines:

Painter

Mainsheet

Outhaul

Traveler

Cunningham

3 vang lines

Dagger hold down
    US SABOT LINE PACKAGE SBSS
    Murrays Sports
    $100.00
    US SABOT MAINSHEET BLOCK SET
    Misc
    $175.00
    Used h16 mainsheet system 5:1
    Murrays Sports
    $175.00
    V JAM CLEAT BOOM (3/16" HOLES)
    Hobie
    $25.00
    Velocitek Prostart Mounting Bracket

Murrays Part# 49-0050-1

Velocitek's ProStart mounting bracket is compatible with almost all sportboat and dinghy masts that have a bolt rope track. The bracket comes packaged with a hex key, a strip-resistant stainless steel slug and all the screws, nuts and washers required to attach the ProStart to the bracket and the bracket to your mast. The design of the bracket provides space for lines to pass behind the ProStart.
    VELOCITEK PROSTART MOUNTING BRACKET
    Misc
    $79.00
    Velocitek Spare Mounting Cradle for Speed Puck

Murrays Part# 49-0051-1

Velocitek's snap-in mounting cradle for the Speed Puck allows use with the ProStart mast bracket or any Tacktick Micro Compass bracket.

The mounting cradle is included with new Velocitek Speed pucks and is also available separately.
    VELOCITEK SPARE MOUNTING CRADLE FOR SPEED PUCK
    Misc
    $19.00
    VELOCITEK SPEEDPUCK
    Misc
    $499.00
    VERTICAL BOW POLE
    NACRA
    $16.33
    WASHER #8 (WH NYLON)

Murrays PN 19-4006WH

White nylon washer is used for installation of access ports (hatches).
    WASHER #8 WHITE NYLON
    Misc
    $0.35
    Washer 1/4 Flat Stainless Steel

Murrays Part# 19-4016

Thin, flat stainless steel washer measures 1/2" OD (outside diameter) x 1/4" ID (inside diameter)
    WASHER 1/4" FLAT (SS)
    Misc
    $0.25
    Washer 5/16x3/4" Stainless Steel

Murrays Part# 19-4018

Flat stainless steel washer with 5/16" diameter hole.
    WASHER 5/16x3/4" SS
    Misc
    $0.20
    Washer Flat 1/2 X 7/8

Murrays Part# 50-8080601

Hobie® factory replacement 1/2" x 7/8" washer.

Hobie Part# 8080601
    WASHER FLAT 1/2 X 7/8"
    Hobie
    $0.40
    Washer Flat 1/4 x 5/8"

Murrays Part# 50-8080521



Hobie® factory replacement 5/8" x 9/32" flat washer is used on Hobie 18 mast step assembly.

Hobie Part# 8080521
    WASHER FLAT 1/4 X 5/8"
    Hobie
    $0.26
    Hobie 8080581 Hobie factory replacement 3/8" lock washer is used on Hobie 18 front and rear inboard support castings.
    WASHER LOCK 3/8"
    Hobie
    $0.39
    Washer 3/8 X 3/4 Nylon for 07-1953
Murrays Part# 50-8080691
Washer for tiller arm bolt #50-8040171. Hobie® factory item
    WASHER NYLON 3/8 X 3/4"
    Hobie
    $0.39
    Washer Nylon 5/16"

Murrays Part# 50-8080681

Washer for tiller connector rod #50-40530001. Hobie® factory item.

Hobie Part# 8080681
    WASHER NYLON 5/16"
    Hobie
    $0.19
    Washer Stainless Steel 5/8 X 1-5/16"

Murrays Part# 50-8080711

Hobie® factory replacement stainless steel 5/8" x 1-5/16" washer. This is the dolphin striker washer on Hobie 20 Miracle and is also used on the Hobie Getaway mast step system.

Hobie Part# 8080711
    WASHER SS 5/8 X 1-5/16"
    Hobie
    $0.99
    WASHER STAINLESS STEEL 1/4 x 1/2 x .032"
    Hobie
    $0.29
    Washer 5/16 x 3/4 Flat SS

Murrays Part# 50-8080671

EZ Loc Rudder Assembly Lower Bolt Washer for Hobie Bravo, Getaway and Wave

Hobie Part# 8080671
    WASHER STAINLESS STEEL 5/16 x 3/4" FLAT
    Hobie
    $0.29
    WASHER STAINLESS STEEL 8.4 STANDARD
    Murrays Sports
    $0.20
    Waterproof Sports Bag Lightweight 60L by Magic Marine
    WATERPROOF SPORTS BAG LIGHTWEIGHT 60L
    Magic Marine
    $99.00
    Wave 4:1 Main Sheet System
Murrays Part# 28-041
The Murrays Hobie low profile 4:1 main sheet system for the Hobie Wave. By Adding a fairlead to the back side of the cleat on the base block we have made a low profile main sheet system that no longer needs a becket on the base block. We have also replaced the upper fiddle block with a double block which makes it even more compact. The result is a lightweight, low profile and very strong, made with 40mm Harken Carbo AirBlocks.
    Murrays low profile Hobie 14 main sheet system
    WAVE 4:1 MAIN SHEET SYSTEM
    Murrays Sports
    $265.00
    Wave Aft End Cap-Black

Murrays Part# 50-38190021

Replacement end cap for Hobie Wave rear cross bar. Works on the rear crossbar only.

Single cross bar cap
Works on rear crossbar of Hobie Wave

Hobie Part# 38190021
    WAVE AFT END CAP-BLACK
    Hobie
    $16.99
    The Murrays Pins & Rings Kit: Hobie Wave + Getaway includes the most often used spare clevis pins and split rings for the Hobie Wave and Hobie Getaway. Compare to Hobie Part # 30302
    WAVE AND GETAWAY PINS & RINGS KIT
    Murrays Sports
    $22.99
    Wave Assembly Manual

Murrays Part# 50-38450000

Hobie® factory assembly manual for the Wave catamaran.

The manual is also available for free download at the Hobie Cat® Web site.
    WAVE ASSEMBLY MANUAL
    Hobie
    $6.39
    WAVE BATTEN CAPS

Tren Tech main sail batten cap kit for the Hobie Wave. 

Includes 3 large batten caps, 2 small batten caps and batten tie line.
    WAVE BATTEN CAPS
    Murrays Sports
    $15.00
    Hobie Wave Bow Spreader Tang

Murrays Part# 50-38120041

Replacement tang for Hobie Wave bow spreader.
Hobie Part# 38120041
    WAVE BOW SPEADER TANG
    Hobie
    $34.99
    Wave Bridle 1/8" Black
Murrays Part# 002-0814-02
One black bridle for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® 39822011.
    WAVE BRIDLE 1/8" BLACK WIRE
    Murrays Sports
    $33.00
    Eyestrap Wave Bridle
Murrays Part# 50-38120011
​Hobie® factory replacement eyestrap for Hobie Wave bridle.
    WAVE BRIDLE EYESTRAP
    Hobie
    $11.99
    Recently viewed