In Stock

In Stock

2398 products

    Everything Murrays Marine carries, all in one place.  Catamaran parts, Kiteboarding and wing foiling central. Use the filters on the side or the search up top to refine your search.

    2398 products
    Hobie Wave Classic Line Package Murrays Part# 001-39WCL Package Includes Mainsheet 5/16" 35' Downhaul 3/16" 5' Righting Line 1/2" 15' Tramp Tension Lines 2x 2' 3/16" and 2x 3' 3/16"
    WAVE CLASSIC LINE PACKAGE
    Murrays Sports
    Wave Club 3-Piece Mesh Trampoline-Black The Murrays Hobie Wave Club 3-Piece Black Mesh Trampoline is not Hobie Class-legal for racing. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Features: A main halyard pocket and hiking straps. Order 43' of 1/4" low-stretch line for lacing (21' for center and two 11' pieces aft). ​Compare to Hobie Part#
    WAVE CLUB 3-PIECE MESH TRAMPOLINE-BLACK
    Murrays Sports
    Wave Club Trampoline Hobie® factory mesh trampoline is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Special order item. Order 43' of 1/4" low-stretch line for lacing (21' for center and two 11' pieces aft). Which Wave model do you have? Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins.
    Wave Club Trampoline Hobie® factory mesh trampoline is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Special order item. Order 43' of 1/4" low-stretch line for lacing (21' for center and two 11' pieces aft). Which Wave model do you have? Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins.
    WAVE CLUB MESH TRAMPOLINE 3 PIECE
    Hobie
    Wave Club Traveler Kit Murrays Part# 50-39250000 The Hobie Wave Main Traveler Kit is the Hobie factory main traveler kit for Club Wave includes track, Ronstan cleat, traveler car, mounting plate and rivets.
    WAVE CLUB TRAVELER KIT
    Hobie
    Downhaul Kit 3:1 Wave Murrays Part# 001-2029 This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver. This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    Downhaul Kit 3:1 Wave Murrays Part# 001-2029 This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver. This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    WAVE DOWNHAUL KIT 3:1
    Murrays Sports
    Wave Forestay 1/8" Black Murrays Part# 002-0844-02 One black forestay for Hobie® Wave is constructed to factory specifications. Compare to Hobie Cat® #39810001.
    WAVE FORESTAY 1/8" BLACK WIRE
    Murrays Sports
    Wave Forestay Adjuster w/ Toggle Murrays PN 001-2085 The Murrays Wave Forestay Adjuster with Toggle is a must have for speeding up the rigging process on your Hobie Wave. This adjuster includes a toggle pin with lanyard that can't fall off of your bridle assembly. This allows you to easily raise and pin the mast single handed! The toggle is affixed around the center of the adjuster with a slightly longer lanyard to keep it out of the way of your bridle vane or other accessories.
    Wave Forestay Adjuster w/ Toggle Murrays PN 001-2085 The Murrays Wave Forestay Adjuster with Toggle is a must have for speeding up the rigging process on your Hobie Wave. This adjuster includes a toggle pin with lanyard that can't fall off of your bridle assembly. This allows you to easily raise and pin the mast single handed! The toggle is affixed around the center of the adjuster with a slightly longer lanyard to keep it out of the way of your bridle vane or other accessories.
    WAVE FORESTAY ADJUSTER W/ TOGGLE PIN
    Murrays Sports
    Wave Front Crossbar 1438up Murrays Part# 50-38131041 Forward crossbar for the Hobie Wave.
    WAVE FRONT CROSSBAR 1438UP
    Hobie
    Hobie Wave Jib- Orange Murrays Part# 50-38992072 Description: Orange jib for the Hobie Wave catamaran. Orange 6 oz heavy duty Dacron sailcloth 25 square foot sail area Hobie Part# 38992072
    WAVE JIB SAIL (ORANGE)
    Hobie
    Hobie Wave Jib Spreader End Cap Murrays Part# 50-38950011 This is part of the Wave bow spreader kit. These go into the ends of the spreader pole. Replacement end cap for Hobie Wave jib spreader assembly. Sold individually Hobie Part# 38950011
    WAVE JIB SPREADER END CAP
    Hobie
    Hobie Wave Keeper Pin With Lanyard Murrays Part# 50-38490011 Hobie® factory replacement keeper wire with pin for Wave and Getaway. Hobie part# 38490011
    WAVE KEEPER PIN WITH LANYARD
    Hobie
    WAVE LINE PACKAGE
    Murrays Sports
    WAVE LOWER MAST
    Hobie
    Hobie Wave Lower Pintle Murrays Part# 50-38101401 Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part # 38101401
    WAVE LOWER PINTLE
    Hobie
    Wave Batten Set Murrays Murrays Part# 30-3012 The Murrays Wave Batten Set are the same specs as the OEM version except yellow and with white batten caps. This set includes 5 battens with black OEM luff caps and white TrenTec Leech caps. The bottom three battens are Hobie Main style battens and the top two battens are Hobie Jib style battens. Hobie Part# 38016001
    WAVE MAIN BATTEN SET
    Murrays Sports
    The Murrays main halyard for Hobie Wave is constructed with 1/4" polyester yacht braid line and 316 stainless wire finished with a halyard shackle with a captured pin, Built to factory specifications. A main halyard is used to raise the main sail. Compare to Hobie part number 38651001.
    WAVE MAIN HALYARD
    Murrays Sports
    Wave Mainsheet S Hook Murrays Part# 50-38900031 Hobie® factory replacement S-hook for Wave mainsheet. Mainsheet is 35 feet of Dacron® spun braid #39-055. Makes it easy to attach mainsheet to sail and standard on all new boats. Hobie Part# 38900031
    WAVE MAINSTEET S HOOK
    Hobie
    WAVE MAST ASSEMBLY (2 PIECE)
    Hobie
    WAVE SAIL BAG DELUXE
    Murrays Sports
    Wave Shroud 1/8" Black Wire Murrays Part# 002-0804-02 Single black shroud (sidestay) for Hobie® Wave is constructed to factory specifications. Compare to Hobie Part# 39790001
    WAVE SHROUD 1/8" BLACK WIRE
    Murrays Sports
    Hobie Wave Spinnaker Murrays Part# 50-38999052 Spinnaker sail for the Hobie Wave. Colors vary. This is the sail only. Hobie Part# 38999052
    WAVE SPINNAKER
    Hobie
    WAVE TRAMPOLINE LACING KIT
    Murrays Sports
    Wave Trampoline Lacing Rod 49" Murrays Part# 50-38881011 Hobie® factory lacing rod for Wave Classic trampoline. Hobie Part# 38881011
    WAVE TRAMPOLINE LACING ROD 49"
    Hobie
    Wave Trampoline Tension Wire Murrays Part# 50-38970051 This is the wire that goes through the side of a Hobie Wave Classic trampoline and hooks into the hooks on the hulls to tension the tramp.
    WAVE TRAMPOLINE TENSION WIRE
    Murrays Sports
    Wave Trapeze Wire BK (2) The basic trapeze assembly is constructed to factory specifications and includes two coated trapeze wires 3/32" (1x19) with nylon handles and a thimble at each end. Wires end just below handles. Order shock cord and adjustment kits separately. A trapeze adjustment kit (#01-1121 or 01-1140, purchased separately) may be added to wire with no installation charge! Check box when ordering and wire length will be adjusted accordingly.
    WAVE TRAPEZE BLACK WIRE (2)
    Murrays Sports
    Wave/Getaway Shroud Anchor Plate Murrays Part# 50-39100011 Hobie® factory replacement shroud anchor chain plate for Club Wave or Getaway. The Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins. Current boats use two plates per side. Hobie Part# 39100011
    WAVE/GETAWAY SHROUD ANCHOR PLATE
    Hobie
    Spare Parts Kit: Wave and Getaway, Hobie part number 30308
    WAVE/GETAWAY SPARE PARTS KIT
    Murrays Sports
    Welded "S" Hook Murrays Part# 56-9650 ​Welded stainless “S” hook for all older Nacras. Performance Sports factory item# 9650
    WELDED "S" HOOK
    Murrays Sports
    WELDED STAINLESS STEEL RING 3/16"x3/4"
    Misc
    Folding Anchor 3.5 LB Murrays Part# 24-2311 Collapsible anchor is constructed of corrosion-resistant galvanized iron and conveniently fits through a 4" port hole. Weighs 3.5 lb.
    WEST MARINE FOLDING ANCHOR 3.5 LB
    West Marine
    Liquid Rope Whipping-Clear Murrays Part# 40-8490 Use Liquid Rope Whipping for a quick and easy way to finish any rope end. Prevents unraveling and forms a permanent, clear flexible coating. Excellent for synthetic and manila ropes. Liquid Rope Whipping can also be used instead of a luff batten cap. Just dip the end of the batten to form a permanent, clear, flexible vinyl coating. 4 fl. oz.
    WEST MARINE LIQUID ROPE WHIPPING-CLEAR
    West Marine
    West Marine Silicone Sealant-Clear Murrays Part# 40-8018 A mildew-resistant, non-sagging, moisture-curing silicone rubber sealant that remains flexible and has excellent resistance to the marine environment. Adheres to bare and painted metal, fiberglass, glass, non-oily woods, many plastics and abraded rubber. Clear sealant comes in a 3-oz. tube. Hobie Cat® uses Part# 376
    WEST MARINE SILICONE SEALANT-CLEAR
    West Marine
    West System Epoxy Resin 1 Quart Murrays Part# 40-4103-1 West System 105 Epoxy Resin is the key component in a wide variety of boatbuilding, restoration, and repair projects. It is the base material of the West System family of products on which all of the West System compounds are built.
    WEST SYSTEM 105 EPOXY RESIN 1 QUART
    West Marine
    West System 205 Fast Hardener Murrays Part# 40-4103 West System 205 Fast Hardener® is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with West System 105 Resin (#40-4103) in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating
    WEST SYSTEM 205 FAST HARDENER 7OZ
    West Marine
    West System 410 Microlight Filler 2oz Murrays Part# 40-4107 West System 410 Microlight Fairing Filler thickens resin and makes it into a less-dense putty form that is better for making certain repairs. Add more filler to make the epoxy thicker. Use with West Systems Epoxy Resin (#40-4103). 2 oz.
    WEST SYSTEM 410 MICROLIGHT FILLER 2OZ
    West Marine
    West System Maxi Epoxy Repair Pack Murrays Part# 40-4102 Use the West System Maxi Epoxy Repair Pack for dings and delamination repair. It gives you three times as much resin as the small kit. The kit contains six 105 Resin/205 Hardener packets, fairing filler, high-density adhesive filler, a 4" x 12" 9 oz fiberglass tape, two application brushes, one syringe, two pipe cleaners, four mixing sticks, one pair of disposable gloves, four cleaning pads, mixing cups and illustrated instructions.
    WEST SYSTEM MAXI EPOXY REPAIR PACK
    West Marine
    West System Plastic Boat Repair Kit with G/Flex Murrays Part# 40-6508 West System Plastic Boat Repair Kit G/Flex repairs plastic canoes, kayaks and inflatables made from HDPE, LDPE, ABS, PVC or polycarbonate plastic with the contents of this West System kit. The Plastic Boat Repair Kit features plastic-friendly G/flex 655 epoxy, and is assembled with the do-it-yourselfer in mind.
    WEST SYSTEM PLASTIC BOAT REPAIR KIT WITH G/FLEX
    West Marine
    West System Small Repair Kit Murrays Part# 40-4101 This West System Handy Repair Pack contains everything you need to complete small repairs around the boat, shop or home, and is perfect for ding repairs. The kit contains two West System 105 Resin/205 Hardener packets, and enough high-density filler to complete a variety of coating and bonding operations.
    WEST SYSTEM SMALL REPAIR KIT
    West Marine
    West Systems Epoxy 1 Quart with Hardener Murrays Part# 40-4103 The West Systems Epoxy QT w/ Hardener is a combination of 105 Epoxy Resin and 205 Hardener. It is used for shops and/or bigger jobs and lamination work. The resin is a clear, pale yellow, low-viscosity liquid epoxy resin that cures to a hard, solid plastic with superior physical properties. The optional mini pumps (#40-4104) screw onto the resin and hardener to make dispensing and 5:1 metering easy and automatic.
    WEST SYSTEMS EPOXY WITH HARDENER
    West Marine
    West Systems G/ Flex Thickened Epoxy Murrays Part# 40-6558 West Systems G/ Flex Thickened Epoxy is two 4 oz tubes. One of the 4 oz tubes is Resin, and the other 4 oz tube is Hardener. The Thickened Epoxy quickly builds up thickness and will not run or sag. It permanently bonds fiberglass, ceramics, metals and plastics. It adheres tenaciously to difficult-to-bond woods including resinous woods and even wet wood.
    WEST SYSTEMS G/FLEX THICKENED EPOXY
    West Marine
    Recently viewed