HOBIE Wave Parts

124 products

    124 products
    WAVE SAILBOAT
    Hobie
    WAVE MAST ASSEMBLY (2 PIECE)
    Hobie
    Wave Comp Tip Murrays Part# 50-38582100 Hobie® factory replacement CompTip for Wave. A CompTip is the upper section of a Hobie mast. Fiberglass and non-conductive, it was designed to prevent electrocution by contact with a high power line.
    WAVE COMPTIP
    Hobie
    Hobie Wave Mainsail- Bora Bora Murrays Part# 50-389910881 Description: Mainsail for the Hobie Wave in the latest Bora Bora color way. This is the sail included with all new Hobie Wave sailboats since 2021 and made from a strong, long lasting and durable Dacron sailcloth material for long life and performance.
    WAVE MAINSAIL (BORA BORA)
    Hobie
    Out of Stock
    WAVE BACKREST BLUE (PAIR)
    Hobie
    Hobie Wave Mainsail-White Murrays Part# 50-38991000 Description: White mainsail for the Hobie Wave. A great alternative for those looking for a basic sail without colored panels.
    WAVE MAINSAIL (WHITE)
    Hobie
    Hobie Wave Spinnaker Murrays Part# 50-38999052 Spinnaker sail for the Hobie Wave. Colors vary. This is the sail only. Hobie Part# 38999052
    WAVE SPINNAKER
    Hobie
    Out of Stock
    Wave Classic Mesh Trampoline-Turquoise Murrays Part# 50-38970058 Hobie Wave Mesh Trampoline for Wave Classic SE is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Which Wave model do you have? Standard Wave/Classic or SE is car toppable and has a one-piece trampoline. Shrouds and bridles connect with hooks.
    WAVE CLASSIC MESH TRAMPOLINE-TURQUOISE
    Hobie
    WAVE LOWER MAST
    Hobie
    Out of Stock
    Wave Spinnaker Pole and Assembly Murrays Part# 50-38999000 Hobie® designed this system for quick setup, ease of use, and maximum performance with better sail control with fewer lines. The factory spinnaker pole and hardware rig kit for Hobie® Wave contains all the equipment and lines to control hoisting, setting the tack, and sheeting the spinnaker, including pole, snuffer and hardware. Simply pull on the halyard to hoist the sail and the tack is hauled out to the end of the pole.
    WAVE SPINNAKER POLE AND ASSEMBLY
    Hobie
    Wave Classic Mesh Trampoline-Black Murrays Part# 50-38970055 Hobie Wave Mesh Trampoline for Wave Classic SE is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Which Wave model do you have? Standard Wave/Classic or SE is car toppable and has a one-piece trampoline. Shrouds and bridles connect with hooks.
    WAVE CLASSIC MESH TRAMPOLINE-BLACK
    Hobie
    Out of Stock
    Wave Jib Spreader Pole and Hardware Kit Murrays Part # 50-38999001 Hobie Cat®'s Wave jib kit enables you to take your Wave sailing to a higher level. More sail area means more speed and performance! The Wave jib accelerates learning and encourages crew participation while sailing. The jib hardware kit comes complete with bow spreader pole and all the nuts, bolts, and blocks required. Order Jib separately.
    WAVE JIB SPREADER POLE AND HARDWARE KIT
    Hobie
    Wave Front Crossbar 1438up Murrays Part# 50-38131041 Forward crossbar for the Hobie Wave.
    WAVE FRONT CROSSBAR 1438UP
    Hobie
    Out of Stock
    Wave 1Piece Classic Trampoline-White Murrays Part# 50-38970000 Hobie factory solid white vinyl tramp is heat welded for longevity. This one-piece tramp fits Hobie® Wave Classic SE (not Wave Club). Which Wave model do you have? Standard Wave/Classic or SE is car toppable and has a one-piece trampoline. Shrouds and bridles connect with hooks. Club Wave has a three-piece trampoline and the shrouds and bridles connect with clevis pins.
    WAVE 1 PIECE CLASSIC TRAMPOLINE-WHITE
    Hobie
    Hobie Wave EZ Loc Rudder Assembly Murrays Part# 50-39312000 EZ Loc rudder assembly for the Hobie Wave. Hobie Part# 39312000
    WAVE EZ LOC RUDDER ASSEMBLY
    Hobie
    Wave Club Traveler Kit Murrays Part# 50-39250000 The Hobie Wave Main Traveler Kit is the Hobie factory main traveler kit for Club Wave includes track, Ronstan cleat, traveler car, mounting plate and rivets.
    WAVE CLUB TRAVELER KIT
    Hobie
    HOBIE EPO3 RUDDER BLADE
    Hobie
    Wave Rear Crossbar Murrays Part# 50-38191031 Hobie Wave Rear crossbar Hobie Part# 38191031
    WAVE REAR CROSSBAR
    Hobie
    Wave Club Trampoline Hobie® factory mesh trampoline is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Special order item. Order 43' of 1/4" low-stretch line for lacing (21' for center and two 11' pieces aft). Which Wave model do you have? Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins.
    Wave Club Trampoline Hobie® factory mesh trampoline is heat-welded for easy maintenance and a long life. Mesh allows wind and water to pass through, so you're not sitting in a puddle. Includes halyard pocket. Special order item. Order 43' of 1/4" low-stretch line for lacing (21' for center and two 11' pieces aft). Which Wave model do you have? Club Wave has a three-piece trampoline and shrouds and bridles connect with clevis pins.
    WAVE CLUB MESH TRAMPOLINE 3 PIECE
    Hobie
    Out of Stock
    H14 Roller Furling Jib Sail (White) Murrays Part# 30-5012 A roller furling jib adds safety, convenience and performance to your Hobie 14. Reduce sail area while sailing or furl your jib while beached. Dacron sailcloth in your choice of weight and solid colors; 4-oz. cloth offers a greater selection of colors than 6-oz. Viewing window is not included (order #30-5001). Order hardware kit #30-5015 separately.
    Wave Jib Sail (White) Murrays Part# 30-6004 The Hobie Wave Jib Sail - 5oz is an aftermarket 5-oz. Dacron jib sail for Hobie Wave is patterned after the factory sail. The base price is for white, but the jib is also available in a variety of colors for an additional charge. This sail is not Class legal for racing. The Hobie Wave Jib is an aftermarket add on and will require some extra rigging to install. They do not have battens and can be set up with a roller furling system.
    WAVE JIB SAIL (WHITE)
    Hobie
    Hobie Wave Jib- Orange Murrays Part# 50-38992072 Description: Orange jib for the Hobie Wave catamaran. Orange 6 oz heavy duty Dacron sailcloth 25 square foot sail area Hobie Part# 38992072
    WAVE JIB SAIL (ORANGE)
    Hobie
    Out of Stock
    Wave Jib Sail (White) Murrays Part# 50-38992010 White jib for the Hobie Wave catamaran. White 6 oz heavy duty Dacron sailcloth 25 square foot sail area
    WAVE JIB SAIL (WHITE)
    Hobie
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    H17/18/20 Lower Rudder Casting Murrays Part# 50-50322001 Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.
    H-17/18/20 LOWER RUDDER CASTING
    Hobie
    Out of Stock
    H17/18/20 Upper Rudder Casting Murrays Part# 50-50321001 Hobie® factory replacement upper left rudder casting for Hobie® 17, 18, 20 or Wave. Use four 6-8 rivets (#19-5033) for installation.
    H-17/18/20 UPPER RUDDER CASTING
    Hobie
    Out of Stock
    Hobie Wave Hiking Stick Kit Murrays Part# 50-39550001 Hiking stick kit for Hobie Wave catamaran. A great way to gain more control of your boat. Ideal length for Hobie Wave. Includes parts for attaching to tiller crossbar. Hobie Part# 39550001
    HOBIE WAVE HIKING STICK KIT
    Hobie
    Hobie 1953 tiller connection kit - new style
    HOBIE TILLER CONNECTOR KIT
    Hobie
    Out of Stock
    Fiberglass Tiller H14/16 Murrays Part# 50-20550001 84" Hobie Fiberglass Tiller Extension The 84" Hobie Fiberglass Tiller Extension is the Hobie factory 84" fiberglass tiller extension with hinge for the Hobie 14 or 16. This stick can be cut to 60" for Getaway or Wave.
    H-14/16 FIBERGLASS TILLER
    Hobie
    Out of Stock
    Hobie Rudder Blade - White Nylon Murrays Part# 50-20493000 The Hobie Rudder Blade - White Nylon is a solid molded white nylon rudder blade for use on virtually all Hobie Catamarans. Hobie factory nylon rudder blades are stock on Hobie 14, 16, 17, 18, 20 and Waves with pre-EZ Loc rudder systems. Hobie rudders are sold undrilled and we recommend that you use your old rudder as a template to drill your new rudder. Hobie Part# 20493000
    HOBIE RUDDER BLADE - WHITE NYLON
    Hobie
    Rudder Blade EZ Lock With Indents Murrays Part# 50-20491000 Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems
    RUDDER BLADE EZ LOCK WITH INDENTS
    Hobie
    The Hobie Baby Bob Mast Float is designed to offer the safety and security of mast head flotation with minimized drag through the air, the Baby Bob is fixed in position to the mast head with the included mounting hardware. The Baby Bob is standard on all Hobie Waves This float will also fit the Getaway and Hobie 16 with or without CompTip. Some drilling may be necessary. The larger Mama Bob (#07-30119) is also an option for most Hobies. The Baby Bob Mast Float displaces 32 pounds of water, is 20" long x 1
    MAST FLOAT WAVE BABY BOB
    Hobie
    HOBIE WAVE EZ LOC TILLER CROSS BAR Murrays PN 50-39524001 Hobie® factory replacement tiller crossbar assembly for Wave with EZ Loc rudder system. Hobie part number 39524001
    WAVE EASY LOC TILLER CROSS BAR
    Hobie
    Out of Stock
    H14 and Wave Comptip Masthead Murrays Part# 50-10602111 This is a replacement masthead for a Hobie 14 or Hobie Wave.
    H-14 AND WAVE COMPTIP MASTHEAD
    Hobie
    Out of Stock
    H14/Wave Mast Step Murrays Part# 50-10170011 Mast step for Hobie 14 (without threaded post) and Wave (96 and older). Hobie® factory replacement part. If you have a H14 with threaded post order #50-20200011 (see below). Requires four 6-6 rivets (item #19-5032).
    H-14/WAVE MAST STEP
    Hobie
    Out of Stock
    H14/18/18SX/20/Wave Comp-tip Luff Track 87" Murrays Part# 50-38584001 Hobie factory replacement 87" luff track for Hobie Cats except Hobie 16 and Getaway.  Older H18 comp tips were one long piece of plastic, newer boats have two sections. This plastic piece, and shorter aluminum piece. If you are replacing an older one piece luff track, you will also need to purchase the aluminum top section as well.
    H-14/18/18SX/20/WAVE COMP-TIP LUFF TRACK
    Hobie
    Out of Stock
    Wave Batten Set Murrays Part# 50-38016001 Complete batten set for the Hobie Wave sailboat. Includes battens 1-5 in the correct lengths for your Wave mainsail.
    WAVE BATTEN SET
    Hobie
    Out of Stock
    Bow Spreader Pole Wave Murrays Part# 50-38999021 Hobie® factory replacement bow spreader pole only for Wave. Hobie Part# 38999021
    WAVE BOW SPREADER POLE
    Hobie
    Out of Stock
    WAVE/GETAWAY TILLER CONNECTION KIT
    Hobie
    Hobie EZ Loc Rudder Housing 50-50313001 EZ Loc Rudder Housing for Hobie Bravo EZ Loc Rudder Housing for Hobie Getaway EZ Loc Rudder Housing for Hobie Wave Hobie part number 50313001 Fits Hobie Wave and Hobie Bravo and Hobie Getaway
    HOBIE EZ LOC RUDDER HOUSING
    Hobie
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    Recently viewed