HOBIE Wave Parts

124 products

    124 products
    Out of Stock
    Wave Club Tramp Track Murrays Part# 50-39341011 Hobie® factory replacement tramp track for Wave Club. The Wave Club has a three-piece trampoline and the shrouds and bridles connect with clevis pins. Special order item.
    WAVE CLUB TRAMPOLINE TRACK
    Hobie
    HOBIE SAIL AND BOOM BAG STANDARD
    Hobie
    Out of Stock
    Wave Bridle with Hook 1/8" Discontinued by Hobie This item is not longer available from Hobie Hobie Part# 38822011
    WAVE BRIDLE WITH HOOK 1/8"
    Hobie
    Out of Stock
    WAVE TILLER ARM
    Hobie
    Out of Stock
    Wave EZ Loc Tiller Arm Murrays Part# 50-39382011 This is the current stock tiller arm for the Hobie Wave. It is part of the EZ Loc Assembly. This will not work with the older H18, H17, H20 Rudder casting system. Hobie Part# 39382011
    WAVE EZ LOC TILLER ARM
    Hobie
    Out of Stock
    H-14/WAVE EUROPEAN MAST BASE
    Hobie
    Out of Stock
    H14/Wave Mast Base Murrays Part# 50-10640011 Hobie® factory replacement black mast base for Hobie® 14 or Wave. Use four 6-6 rivets (#19-5032) for installation.    
    H-14/WAVE MAST BASE
    Hobie
    Out of Stock
    Wave Shroud with Hook Murrays Part# 50-38790001 Hobie® factory replacement shroud with hook for Wave.
    WAVE SHROUD WITH HOOK
    Hobie
    Wave Mast Step Casting Murrays Part# 50-38171001 Mast step casting for the Hobie Wave catamaran. Standard on all Waves on stock on new production boats. The previous version used the H14 style cup instead. Hobie Part# 38171001
    WAVE MAST STEP CASTING
    Hobie
    WAVE MAST BASE new S/N 1438 UP
    Hobie
    H14/16/18/20/Wave Rudder Cam Stop Plate Murrays Part# 50-20352000 Hobie factory replacement rudder cam plate for Hobie 14, 16, 17, 18 (1987 and later) and Wave (with aluminum castings). Hobie Part# 20352000
    H-14/16/18/20/WAVE RUDDER CAM STOP PLATE
    Hobie
    Mast Ball H17 Wave Murrays Part# 50-50212301 Hobie factory replacement mast ball for Hobie® 17 and Wave. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. This ball can also be glued for use on Trac 16.
    H-17/WAVE MAST BALL
    Hobie
    Hobie Wave Bow Spreader Tang Murrays Part# 50-38120041 Replacement tang for Hobie Wave bow spreader. Hobie Part# 38120041
    WAVE BOW SPEADER TANG
    Hobie
    Out of Stock
    Hobie Main Sail Headboard w/ rivets Replacement Hobie factory Hobie Main Sail Headboard w/ rivets. Hobie part #68330011
    HOBIE ALUMINUM HEADBOARD WITH RIVETS
    Hobie
    EZ Lock Upper Pintle Murrays Part# 50-90880211 Hobie® factory replacement upper pintle for EZ Loc rudder system. Fits Hobie Bravo and Getaway boats Hobie Part# 90880211
    BRAVO/WAVE/GETAWAY EZ LOC UPPER PINTLE
    Hobie
    EZ Lock Lower Pintle Murrays Part# 50-90880221 Hobie® factory replacement lower pintle for EZ Loc rudder system. Fits Hobie Bravo, wave and Getaway boats Hobie Part# 90880221
    BRAVO/WAVE/GETAWAY EZ LOC LOWER PINTLE
    Hobie
    EZ LOC UP-LOCK PIN KIT Murrays PN 50-50314001 The EZ LOC UP-LOCK PIN KIT is the pin for locking Hobie Cat EZ Loc rudder system in up position during storage. EZ Loc up-lock pin kit is the pin, screw, split rings and lanyard for securing the EZ Loc rudder in the up position. Hobie Part Number 50314001
    HOBIE EZ LOC UP LOCK PIN KIT
    Hobie
    TILLER ARM INSERT Hobie factory tiller arm insert for 1953 tiller kit. Hobie part number 40660001. Murrays.com In stock
    HOBIE TILLER ARM INSERT
    Hobie
    H14 Mast Spinnaker Tang Murrays Part# 50-10690000 Hobie® factory replacement spinnaker tang or mast tang for Hobie 14 or Wave. Use six 6-4 rivets (#19-5031) and six 6-4 casings (#19-5020) for installation.
    HOBIE 14/WAVE MAST TANG
    Hobie
    Out of Stock
    HOBIE POCKET PROTECTOR KIT
    Hobie
    Hobie Pre EZ Loc Upper Pintle Murrays Part# 50-38101301 Replacement upper pintle assembly for Hobie Wave and Hobie Getaway sailboats using the pre EZ loc style rudder assembly. Original Equipment on Hobie Wave and Hobie Getaway sailboats Upper pintle should be mounted with two (2) screws Use Part# 8030171 for boats 2008 and older, or Part# 8030331 for 2009 and newer If you have an EZ Loc style assembly, use the Hobie EZ loc upper pintle part# 90880211 Hobie Cat Part # 38101301
    HOBIE PRE EZ LOC UPPER PINTLE
    Hobie
    Hobie Wave Lower Pintle Murrays Part# 50-38101401 Hobie® factory replacement lower pintle for Wave or Bravo or Getaway Pre-EZ Loc Rudder Systems. Lower pintle assembly for Hobie Wave sailboat. Original Equipment on all Hobie Wave sailboats. Lower pintle should be mounted with four (4) screws. Use Part # 8030171 for boats 2008 and older, or Part # 8030331 for 2009 and newer. Hobie Cat Part # 38101401
    WAVE LOWER PINTLE
    Hobie
    Out of Stock
    TILLER ARM SWIVEL END CAP Hobie factory tiller arm swivel end cap for Hobie 20 Miracle rudder system 1953. Hobie part number 40650001
    TILLER ARM END CAP SWIVEL
    Hobie
    Out of Stock
    Hobie Wave Trampoline Tension Strap Murrays Part# 50-38970061 Replacement strap for tensioning the Hobie Wave trampoline. Each boat requires four straps.
    WAVE TRAMPOLINE TENSION STRAP
    Hobie
    Hobie Getaway Tiller Connector Screw Murrays Part# 50-40530021 Hobie® factory replacement tiller connector screw for Club Wave. Hobie Part# 40530021
    GETAWAY TILLER CONNECTOR SCREW
    Hobie
    Hobie Tendon Kit (Pre EZ Loc) Murrays Part# 50-37561011 This tendon kit is the replacement for tendons used on the Hobie Wave, Hobie Getaway, and Hobie Bravo with the first generation EZ Loc rudders. This upgraded version is a notable improvement over the original tendons. Hobie Part# 37561011
    HOBIE TENDON KIT (PRE EZ LOC)
    Hobie
    Hobie Wave Mast Step Post (Threaded) Murrays Part# 50-38170001 This part is used on the Hobie Wave to connect the mast ball to the mast step casting on the front crossbar. The older waves utilize an H14 mast step casting. Hobie Part# 38170001
    WAVE MAST STEP POST (THREADED)
    Hobie
    H14/16 Main Halyard Hook Murrays Part# 25-3330 The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation. Hobie part# 10680000
    H-14/16 MAIN HALYARD HOOK
    Hobie
    Wave Aft End Cap-Black Murrays Part# 50-38190021 Replacement end cap for Hobie Wave rear cross bar. Works on the rear crossbar only. Single cross bar cap Works on rear crossbar of Hobie Wave Hobie Part# 38190021
    WAVE AFT END CAP-BLACK
    Hobie
    Out of Stock
    Tiller End Cap with Pin Murrays Part# 50-37561203​ Hobie® factory replacement tiller end cap with pin for '07 tiller connector. Fits Hobie Getaway. Hobie Part# 37561203
    TILLER END CAP WITH PIN
    Hobie
    Hobie Rudder Cam Hobie part number 10480000 Hobie factory replacement cam. Rudder cams should be inspected and replaced periodically. Always replace cams that are bent out of shape. Used on all Hobie Catamarans with metal housing rudder systems. Compatible on all Hobie 14, 16, 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models. Not compatible with the Hobie Wave and Getaway EZ Loc plastic rudder housing rudder system.
    HOBIE RUDDER CAM
    Hobie
    Out of Stock
    Hobie Wave Forward Crossbar End Cap Murrays Part# 50-39130021 Replacement end cap for Hobie Wave forward crossbar. Single cap Works on forward crossbar of Hobie Wave Hobie Part# 39130021
    HOBIE WAVE FORWARD CROSSBAR END CAP
    Hobie
    H18 Rudder Cam Pin Murrays Part# 50-50312301 Hobie® factory replacement rudder cam pin for Hobie 17, 18, 20, 21SC and 21SE as well as older Wave and Getaway models.
    H-18 RUDDER CAM PIN
    Hobie
    Mast Float Mount Plate Murrays Part# 50-39640020 Mast float plate for the Hobie Baby Bob and the Mama Bob. Sold individually Hobie Part# 39640020
    MAST FLOAT MOUNT PLATE
    Hobie
    Hobie Wave Jib Spreader End Cap Murrays Part# 50-38950011 This is part of the Wave bow spreader kit. These go into the ends of the spreader pole. Replacement end cap for Hobie Wave jib spreader assembly. Sold individually Hobie Part# 38950011
    WAVE JIB SPREADER END CAP
    Hobie
    Wave Trampoline Lacing Rod 49" Murrays Part# 50-38881011 Hobie® factory lacing rod for Wave Classic trampoline. Hobie Part# 38881011
    WAVE TRAMPOLINE LACING ROD 49"
    Hobie
    Batten Cap Hobie Main Leech Murrays Part# 50-11323000 Hobie® factory replacement part number 11323000. Hobie batten cap are sold individually. Order batten tie separately; 18" of 1/8" line per batten cap is standard. Sold individually
    HOBIE MAIN LEECH BATTEN CAP
    Hobie
    Hobie Wave Keeper Pin With Lanyard Murrays Part# 50-38490011 Hobie® factory replacement keeper wire with pin for Wave and Getaway. Hobie part# 38490011
    WAVE KEEPER PIN WITH LANYARD
    Hobie
    Hobie EZ Loc Lower Rudder Housing Tube Rivet Murrays Part# 50-50313301 Rivet for the lower rudder housing on Hobie Bravo, Getaway and wave EZ Loc Systems.  Hobie Part# 50313301
    HOBIE EZ LOC LOWER RUDDER HOUSING TUBE RIVET
    Hobie
    Hobie EZ Loc Rudder Linkage Murrays Part# 50-50313201 Replacement rudder linkage for Hobie EZ Loc style rudder assemblies.  Hobie Bravo, Getaway and Wave Hobie Part# 50313201
    HOBIE EZ LOC RUDDER LINKAGE
    Hobie
    Recently viewed