Upgrades and Accessories for your Hobie 18

Hobie 18 Upgrades and Accessories

84 products

    Upgrades and Accessories for your Hobie 18

    84 products
    Jib Clew Pigtail Kit Murrays Part# 001-4015 Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew. Color may vary from picture. Features: jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack! "Locked" eye splices— jib blocks cannot slip or un-tie. Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind. Lightweight, easy-connect—
    jib clew pigtail attachment close up
    JIB CLEW PIGTAIL KIT
    Murrays Sports
    trapeze adjustment kit - 3102 - Murrays EZ Up Trap Kit
    EZ-UP TRAP KIT: NO-CUT (PR)
    Murrays Sports
    Snap Shackle With Tack 1/4" Murrays Part# 22-4501 Swiveling tack shackle with 1/4" clevis pin. Use on hexaratchets on Hobie® 18, Nacra or Prindle. To connect the swivel shackle to an item that requires a 3/16" clevis pin, you will need a 3/16" clevis pin with 7/8" shaft. Also convenient for the jib tack connection on Nacras and Inters.
    SNAP SHACKLE WITH TACK 1/4"
    Murrays Sports
    1/4" QUICK RELEASE BOW SHACKLE
    Murrays Sports
    Adjustable Tiller Endcap Murrays Part# 51-99000010 Extra long tiller crossbar end cap from Hobie Europe. Pro Tip: Put some McLube One Drop or Corrosion X on the screw before installing to prevent seizing.
    ADJUSTABLE TILLER ENDCAP
    Murrays Sports
    Quick-Release Pin Deluxe 1/4 X 3/4 Murrays Part# 18-4M075 This economical pin features a spring-loaded ball that exerts sufficient pressure to help avoid accidental release. The pin is also available with a lanyard to help prevent loss of pin (see related items below). Measurements are 1/4" diameter x 3/4" maximum grip length (distance from the shoulder to the locking ball bearings). Compare to Hobie Cat® #20302.
    QUICK RELEASE DELUXE PIN 1/4 X 3/4"
    Misc
    H14/16/17/18 Line Catcher-Black Murrays Part# 30-3530 The Hobie Trampoline Line Catcher is a strip of mesh trampoline that fits in between your center trampoline lacing to prevent lines and other items from falling through the lacing. Works on all 3 piece Hobie 14, 16 and 18 trampolines.
    H-14/16/17/18 LINE CATCHER-BLACK
    Murrays Sports
    Quick Release Deluxe Pin 1/4 X 1.5 with Lanyard Murrays Part# 18-4M150L This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. This pin includes a lanyard to help prevent loss of pin. Uses: Hobie 18 mast hinge pin, Compare to Hobie part#P 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 8020430, 8020420, 8020421
    QUICK RELEASE DELUXE PIN 1/4 X 1-1/2" WITH LANYARD
    Misc
    Ronstan Toggle Pin with Lanyard 1/4 X 5/8" Murrays Part# 21-1155L ​Stainless steel 1/4" diameter toggle pin replaces 5/8" clevis pin. Secure quick connect/disconnect clevis pin with a lanyard so you loose it.
    RONSTAN TOGGLE PIN WITH LANYARD 1/4 X 5/8"
    Ronstan
    Nylon Port Fastener Kit The Port Nylon Fastener Kit includes all the necessary nylon fasteners (screws, washers and nuts) plus marine silicone sealant for the installation of two access ports, also known as hatches, on to a catamaran like a Hobie, Nacra or Prindle. Use this page to order: 001-1159 White 001-1160 Black
    NYLON PORT FASTENER KIT
    Murrays Sports
    Deluxe Quick Release Pin 1/4 X 1.5" Murrays Part# 18-4M150 This quick release pin features a push button on the top that releases 2 spring-loaded balls at the tip that secure the pin in place. Also available with a lanyard, see related items below. Quick pins are ideal for replacing clevis pins in areas that you would like to be able to quickly connect and disconnect. Uses: Hobie 18 mast hinge pin Compare to Hobie part# 20307 PIN, QR 1/4 X 1-1/2 CUP Upgrade for Hobie 8020181, 8020180, 8020431, 802
    DELUXE QUICK RELEASE PIN 1/4 X 1.5"
    Misc
    DACRON INSIGNIA CLOTH - BLACK
    Murrays Sports
    Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
    TELO-CAT REPLACEMENT VANE
    Davis
    Hobie 18 clevis pin kit includes 13 pieces: mast hinge pin, clevis pin assortment, and split ring assortment. Compare to Hobie Part Number #30304 Murrays.com
    H-18 PINS & RINGS KIT
    Murrays Sports
    Murrays Tell Tails Pack of 16 Murrays PN 001-3825 Black ripstop nylon tell-tales attach to the sail with adhesive patches to visually aid in trimming the sail.  Compatible with both the main and jib sails. Set includes: 6 x pairs of Black tell tails 4 x Black Leech tell tails
    MURRAYS TELL TAIL SET
    Murrays Sports
    7"X17" Zip Pouch-Assorted Colors Murrays Part# 31-1402 The Murrays Zip Pouch 7"X17" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    7"X17" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    5"X12" Zip Pouch-Assorted Colors Murrays Part# 31-1401 The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 72005B
    5"X12" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    Hobie Shroud Adjuster Covers 11″ Pair are vinyl covers that protect the crew from metal shroud adjusters and can prevent de-masting by protecting the split rings. Includes two adjuster covers, one for each side of the boat. Available in white and black. Compatible with al beach cats: Nacra, Prindle, A-Cat, Dart, Sol Cat, G-Cat...
    11" SHROUD ADJUSTER COVERS
    Hobie
    Hobie Tiller End Cap Murrays Part# 50-10400010 Tiller arm end cap for Hobie Cats is a factory replacement part. Use two 6-6 rivets (item #19-5032) for installation.
    HOBIE TILLER END CAP
    Hobie
    Halyard 5"X 9" Zip Pouch-Assorted Colors Murrays Part# 31-1400 The Murrays 5" x 9" zippered halyard pouch is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the tramp lacing. The off-center zipper is designed for easy stuffing of your boat's halyard. The pouch is also handy for storing replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A. Compare to Hobie Cat® stow bag #72000B and 7
    HALYARD 5"X9" ZIP POUCH- ASSORTED COLORS
    Murrays Sports
    Out of Stock
    The 6″ Cat Bag provides a handy storage pouch inside your access ports for snacks, drinks, tools and more. Designed to fit 6″ access ports that have a inner ring for them to sit on
    6" CAT BAG (SCREW-IN)
    Sea Dog
    Ronstan Toggle Pin 15.9mm Long 6.4mm Diameter Murrays Part# 21-1155 Replaces 1/4" diameter clevis pin of same grip length. Also available with a lanyard 21-1155L
    RONSTAN TOGGLE PIN 1/4 x 5/8"
    Ronstan
    Quick Release Standard Pin 1/4 X 1" Murrays Part# 18-4R100 This quick-release pin with standard head and pull ring is sometimes used as a convenience item on Prindle main clew to outhaul connection. Measurements are 1/4" diameter x 1" maximum grip length (distance from the shoulder to the locking ball bearings)
    QUICK RELEASE STANDARD PIN 1/4 X 1
    Misc
    Out of Stock
    QUICK RELEASE STANDARD PIN 1/4 X 3/4"
    Misc
    Clamcleat with Top Roller (Aluminum) Murrays Part# 27-0236 Replace old, worn-out outhaul and downhaul Clamcleats®. Aluminum cleats are stronger than nylon and have increased wear resistance. Easy to mount. Line capacity is 1/8"-1/4".
    CLAMCLEAT WITH TOP ROLLER (ALUMINUM)
    Clamcleat
    Murrays Part# 001-4045 Hobie 18 Mast Bearing Kit enables smooth mast rotation on the Hobie® 18. The kit includes a new mast bearing, stainless steel washers and Teflon washer. To mount, use one #19-3019 screw (included) for post-1990 Hobie 18 or one #19-3020 screw (sold separately) for pre-1990 Hobie 18. Compare to Hobie Cat® #1132 (bearing 60110000 and Teflon™ washer).
    Hobie 18 mast bearing 60110000 and 1132
    HOBIE 18 MAST BEARING KIT
    Murrays Sports
    H18 Telo-Cat/Hobie Vane Adapter Murrays Part# 008-1451 Adapts the Telo-Cat (#08-1450) or Hobie® (#04-7703) vane to the Hobie 18 furling drum. When using to adapt a Telo-Cat vane for use on a Hobie 18, it is necessary to enlarge one hole in the plastic part of the vane to accommodate a clevis pin. Hobie Cat® Part# CM7705
    H-18 TELO-CAT VANE ADAPTER
    Murrays Sports
    Heavy Duty Swivel with Aluminum Cam Roller Fairlead Murrays Part# 25-3020 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. This is a Murrays product that features an Aluminum Harken 150 cam cleat, and HD swivel plate and a HD roller fairlead. The advantage to the roller fairlead is that it can take a larger line diameter, up to 1/2", and handle heavy loads at extreme angles. Making it ideal for larger catamarans and sailors in high wind areas.
    ROLLER FAIRLEAD KIT (SWIVEL)
    Murrays Sports
    Murrays Part# 001-0010 ​Use less effort to rig with the Easy Rigg downhaul tool, halyard tensioner and shackle tool. The ergonomic shape is easy to grip and pull and its long-wearing metal teeth grip 3/32″ to 3/16″ line. Available in black or bright assorted colors (yellow, red, green, and sometimes blue, as available) that help prevent loss. Hobie Cat® uses item #2065 for the Easy Rigg Tool.
    EASY RIGG TOOL
    Easy-Rigg
    TRAMP CLAMP (10) Minimize chafing at trampoline stress points and reduce the possibility of the trampoline pulling out of the aluminum extrusion. Clamps slide into the aluminum extrusion track. 10 pieces, 1.5" long. By Tren Tec.™ Hobie Cat® uses #2066 for this item
    TRAMP CLAMP (10)
    Tren-Tec
    H18 Angled Luff Batten Caps Murrays Part# 012-4005 No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten. Hobie Part# 1563 Sold in packages of 10
    H-18 ANGLED LUFF BATTEN CAPS
    Tren-Tec
    H18SX Bracket Wing Strut Murrays Part# 50-91490010 This is the bracket that the rear support arm of an H18SX wing uses. One is mounted to the wing and one is mounted to the rear hull of an H18SX per wing. Hobie Part# 91490010
    H-18SX BRACKET WING STRUT
    Hobie
    Ronstan bow shackle measurements
    RONSTAN 1/4" BOW SHACKLE
    Ronstan
    Kisme Kleet (4) Murrays Part# 005-1010
    KISME KLEET (4)
    Misc
    Ronstan Stainless Steel D Shackle, 3/16" Pin, Slotted Head Murrays Part# 21-0616 Ronstan stainless D shackle has 3/16" diameter pin. This shackle is a substitute for Hobie® item #11220000, #SP0051 and #SP0052.
    RONSTAN 3/16 D SHACKLE
    Ronstan
    Quick-Release Pin Detent 1/4 X 1-1/2 Murrays Part# 18-4D150 The Quick-Release Pin Detent 1/4 X 1-1/2 is an economical, quick connection for Hobie 16 mast step pin. A spring-loaded ball exerts sufficient pressure to help avoid accidental release. Measurements are 1/4″ diameter x 1-1/2″ maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE DETENT PIN 1/4 X 1-1/2"
    Misc
    Ronstan Clevis Pin Retaining Clip Murrays Part# 21-0413 The Ronstan Spring Clip is a stainless spring clip for quick rudder pin removal or Hobie 14, 16, 17, 18, 20, Wave and Getaway models. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie, Nacra and Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape. Ronstan Part# RF413
    RONSTAN CLEVIS PIN RETAINING CLIP
    Ronstan
    Rudder Stiffening Kit Murrays Part# 001-2053 The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.
    RUDDER STIFFENING KIT
    Murrays Sports
    H18 Assembly Manual Murrays Part# 50-63450000 Printout of H18 assembly manual PDF.
    H-18 ASSEMBLY MANUAL
    Murrays Sports
    Recently viewed