Upgrades and Accessories for your Hobie 18

Hobie 18 Upgrades and Accessories

100 products

Upgrades and Accessories for your Hobie 18

100 products

Sort

TRAMP CLAMP (10)

Minimize chafing at trampoline stress points and reduce the possibility of the trampoline pulling out of the aluminum extrusion. Clamps slide into the aluminum extrusion track. 10 pieces, 1.5" long. By Tren Tec.™ Hobie Cat® uses #2066 for this item

TRAMP CLAMP (10)

H18 Angled Luff Batten Caps
Murrays Part# 012-4005
No more battens poking through next to the mast. Ten angled Tren Tec luff caps for Hobie® 18 prevent batten splitting and align batten to the angle of the sail, increasing the life of your sail. Glue to the forward end of the batten.
Hobie Part# 1563
Sold in packages of 10

H-18 ANGLED LUFF BATTEN CAPS

H18SX Bracket Wing Strut

Murrays Part# 50-91490010

This is the bracket that the rear support arm of an H18SX wing uses. One is mounted to the wing and one is mounted to the rear hull of an H18SX per wing.

Hobie Part# 91490010

H-18SX BRACKET WING STRUT

Ronstan bow shackle measurements

RONSTAN 1/4" BOW SHACKLE

Quick Release Detent Pin 1/4 X 3"
Murrays Part# 18-4D300
Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release.

Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings).

Uses:

- Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats.

Compare to Hobie part # 8020501

Quick Release Detent Pin 1/4 X 3"
Murrays Part# 18-4D300
Economical quick release pin has a spring-loaded ball that exerts sufficient pressure to help avoid accidental release.

Measurements are 1/4" diameter x 3" maximum grip length (distance from the shoulder to the locking ball bearings).

Uses:

- Use as mast step pin on Hobie® 21 and Prindle 16/18/18-2/19 cats.

Compare to Hobie part # 8020501

QUICK RELEASE DETENT PIN 1/4 X 3"

Kisme Kleet (4)

Murrays Part# 005-1010

KISME KLEET (4)

H-18SX WING STRUT

Ronstan Stainless Steel D Shackle, 3/16" Pin, Slotted Head

Murrays Part# 21-0616

Ronstan stainless D shackle has 3/16" diameter pin. This shackle is a substitute for Hobie® item #11220000, #SP0051 and #SP0052.

RONSTAN 3/16 D SHACKLE

Zip Tech Zipper Lubricant 0.5oz

Murrays Part# 38-1925

Zipper Lubricant for use on dry suits, and other tough zipper applications to ensure zippers operate properly and seal out the elements.

ZIPPER LUBRICANT

Quick-Release Pin Detent 1/4 X 1-1/2
Murrays Part# 18-4D150
The Quick-Release Pin Detent 1/4 X 1-1/2 is an economical, quick connection for Hobie 16 mast step pin. A spring-loaded ball exerts sufficient pressure to help avoid accidental release. Measurements are 1/4″ diameter x 1-1/2″ maximum grip length (distance from the shoulder to the locking ball bearings).

QUICK RELEASE DETENT PIN 1/4 X 1-1/2"

Ronstan Clevis Pin Retaining Clip

Murrays Part# 21-0413

The Ronstan Spring Clip is a stainless spring clip for quick rudder pin removal or Hobie 14, 16, 17, 18, 20, Wave and Getaway models. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie, Nacra and Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape.

Ronstan Part# RF413

RONSTAN CLEVIS PIN RETAINING CLIP

Rudder Stiffening Kit

Murrays Part# 001-2053

The Rudder Stiffening Kit for all Hobies eliminates excessive clearances between rudders and castings which cause wobble and thwart rudder alignment. Kit has 4 stainless nylock nuts and 8 spacers. Compare to Hobie Cat® item #136.

RUDDER STIFFENING KIT

H18 Assembly Manual

Murrays Part# 50-63450000

Printout of H18 assembly manual PDF.

H-18 ASSEMBLY MANUAL

Universal Drain Plug for most Hobie, Nacra and Prindle Catamarans which includes a gasket and fits most Hobie, Nacra and Prindle catamarans. Hobie part number 10091000

Hobie drain plug 10091000 Hobie 18

HOBIE DRAIN PLUG WITH GASKET

Toggle Strap 12"-24"

Murrays Part# 13-1020

Our handy toggle strap secures items with circumferences from 12" to 24". It is constructed of 1/8" shock cord that is secured with a 1-1/8" end stop.

Sold individually

Compare to Hobie Cat® Part# 370

TOGGLE STRAP 12" - 24"

Wind Vane Replacement Tips and Washers 

Coffee Marine Wind Vane Tip and Washer kit that fits the original Coffee Marine Bridle Vane and the Hobie Standard Bridle Vane. These are easy to knock off or misplace. Stash a couple in your tool box and never be without your trusty Bridle Fly!

WIND VANE REPLACEMENT TIPS & WASHERS

Harken 22mm Spring

Murrays Part# 28-0071

Harken universal stand-up spring supports blocks on pad eyes, eyestraps, bases and traveler cars. Weight: .32 oz.
This works well with snap shackle w/tack to upgrade a typical beachcat mainsheet system.

HARKEN 22MM SPRING

Spring Clip 1/4-5/16"

Murrays Part# 25-2204

Use this 316 stainless spring clip for quick rudder pin removal or on 1/4" to 5/16" pins. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie 14, 16, 17, 18, 20, Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape.

Spring Clip: 1/4-5/16

Murrays Part# 25-2204

Use this stainless spring clip for quick rudder pin removal or on 1/4" to 5/16" pins. This handy little pin is also called a hairpin cotter, bridge pin, hitch pin clip or R clip. Great convenience item for all boats with rudder pins, ie: Hobie 14, 16, 17, 18, 20, Prindle 15, 16, 18, 18-2, 19, 19MX, and Escape.

SPRING CLIP 1/4 - 5/16"

RUDDER PIN SPRING CLIP: 3/8

The 3/8 spring clip is a quick release pin for rudder pins on all Hobie, Nacra and Prindle Catamarans. Ideal for sailors who trailer their boats and remove their rudder castings.

RUDDER PIN SPRING CLIP: 3/8

Previous 1 2 3

Recently viewed

Hobie 18 Upgrades and Accessories