All Hobie 16 parts: Sails, trampolines, jibs, lines, rigging, rudder parts.

Hobie 16 Parts - All

434 products

    Murrays Sports is a one stop shop for all Hobie 16 replacement parts, rigging, sails, hardware, trampolines, rudder components, and accessories. Find quality parts to maintain, repair, and upgrade your Hobie 16 for peak performance on the water.

    Hobie 16 Parts and Accessories

    Keep your Hobie 16 sailing at its best with high-quality replacement parts and accessories. Whether you're repairing worn equipment, upgrading performance components, or performing routine maintenance, you'll find the parts you need to keep your catamaran in top condition.

    Browse a complete selection of Hobie 16 parts, including:

    • Standing and running rigging - shrouds, halyards, bridles, forestays and trapeze wires.
    • Rudder and tiller components
    • Trampolines and trampoline accessories
    • Mast and boom hardware
    • Sail battens and sail accessories
    • Blocks, cleats, and sheeting lines and compete control systems
    • Hull fittings and replacement hardware
    • Beach wheels and launching accessories

    Murrays inventory is designed to help Hobie sailors extend the life of their boats while maximizing safety, speed, and performance. Whether you're a recreational sailor, racer, or sailing school, Murrays offers reliable Hobie 16 replacement parts for every maintenance and upgrade project.

    Use the hyperlinked Hobie 16 illustrated parts list to help you find the parts that you need.

    Or shop by category: Sails, boom parts, hull parts, trampolines, upgrades and accessories.

    434 products
    Jib Traveler Control Kit: Fixed Cam Murrays Part# 001-3112 A jib traveler system allows remote adjustment of the jib cars. This dramatically increases downwind speed and may help avoid a pitchpole caused by your crew moving leeward to make an adjustment by hand.
    JIB TRAVELER CONTROL KIT: FIXED CAM
    Murrays Sports
    Out of Stock
    H14/16 Mast Step-Black Murrays Part# 50-20200011 This is a factory Hobie 14*/16 Mast Step Black replacement. For Hobie 14s and Hobie 16s.  This is the post 2004 version. The first hardware change was in the early 80s. The mast step was angled further back and the mast base was adjusted to match. If you are replacing an original pre-1980 mast step you will need new rigging to accommodate the increased mast rake.
    H-14/16 MAST STEP-BLACK
    Hobie
    Out of Stock
    Comp-Tip Mast Head H16 Murrays Part# 50-20614001 Hobie® factory replacement mast head with sheaves. Use four #19-5032 6-6 rivets for installation. This is the standard Hobie Part that comes with all comptip masts on Hobie 16s. This CompTip mast head also replaces the obsolete Hobie 16 mast head (no longer available) for all-aluminum mast. The original halyard will work if you move the halyard hook down to the appropriate height. Alternatively, a new comptip halyard #02-0273-60
    H-16 COMP-TIP MAST HEAD
    Hobie
    Out of Stock
    Tracker Car Complete (Pre-1994) Murrays Part# 007-1050 This tracker car is the standard replacement part for all 1993 and earlier Hobie® 14, 16 and 17 main tracker traveler assemblies. Includes 2-3 rivets where required. Hobie Cat® factory item #105.
    TRACKER CAR COMPLETE (PRE'94)
    Hobie
    Out of Stock
    HOBIE TRACKER CAR COMPLETE NEW (POST93)
    Hobie
    The Murrays Jib Snorkel will protect your roller furling jib from ultraviolet light and weather while on or off the boat.
    MURRAYS JIB SNORKEL
    Murrays Sports
    Hobie 16 Aussie Jib Halyard Kit with Pigtail Murrays Part# 001-3302 Reduce mast compression by 66%! The Aussie Jib Halyard Kit for the Hobie® 16 allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new Hobie 16's. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions. 80660000
    H-16 AUSSIE JIB HALYARD KIT WITH PIGTAIL
    Murrays Sports
    Out of Stock
    Tiller Crossbar Adjustable Cap Kit Murrays Part# 50-6040000M Murrays Tiller Crossbar connection kit is a complete kit to connect the Hobie tiller cross bar and tiller arms. This is modeled after the original design but with some upgrades. We use 2 adjustable end caps to extend the overall adjustment length. Allows users shorten their tiller crossbar due to corrosion. 2 adjustable caps also allows users to adjust the crossbar length from either end of the bar. The tiller crossbar
    TILLER CROSSBAR ADJUSTABLE CAP KIT
    Murrays Sports
    The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by A Fleet Racers looking for a lighter more economic alternative. Murrays helped produce them and here they are! Same diameter, same length, just lighter material and a longer grip compared to the Hobie fiberglass tiller extension. 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top Weight: 3/4 lb. Compare to Hobie 20550001
    The 84" Murrays Fiberglass Tiller Extension is a lighter version of the Hobie fiberglass tiller extension. It was developed by A Fleet Racers looking for a lighter more economic alternative. Murrays helped produce them and here they are! Same diameter, same length, just lighter material and a longer grip compared to the Hobie fiberglass tiller extension. 5/8" diameter black fiberglass tube Hobie yoke base, same as the Hobie version 16" grip on the top Weight: 3/4 lb. Compare to Hobie 20550001
    MURRAYS 84" FIBERGLASS TILLER EXTENSION
    Murrays Sports
    The H-16 Jib Batten Set includes 4 Hobie 16 jib battens. Your choice of white Trentec batten caps or black Hobie leech caps. Luff caps are not included.  Slightly diamond/oval profile fiberglass battens. Current Batten Lengths: 30″, 44″, 58″, 67″ Compare to Hobie part number 82070001 and 82080001
    H-16 Jib Batten Set The H-16 Jib Batten Set includes 4 Hobie 16 jib battens. Your choice of white Tren Tec batten caps or black Hobie leech caps. Slightly diamond/oval profile fiberglass battens. Current Batten Lengths: 30″, 44″, 58″, 67″ Fits all generations of Hobie Jibs. You can easily cut them shorter if desired. Hobie part # 82070001 and 82080001
    H-16 JIB FIBERGLASS BATTEN SET
    Murrays Sports
    Out of Stock
    Tie Down H16 Custom Murrays Part# 007-1793 Nice factory tie down kit for H16s, bolts to trailer and has hook and receiver for boat, slip hook into receptacle on boat, toggle the lever, and your boat is secure!
    TIE DOWN H-16 CUSTOM
    Hobie
    Out of Stock
    POWER RIGHTING SYSTEM WITHOUT POLE
    Murrays Sports
    Murrays Part# 001-1130 Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. We suggest purchasing Can't Miss Rings (#01-0124) to supply a handle down low when needed. Order shock cord separately
    Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. Show with can't miss rings and trap shock cord. Hobie part 1204
    HIGH-LOW TRAPEZE ADJUSTMENT KIT: NO CUT
    Murrays Sports
    The Aussie Jib Halyard Kit for the Hobie 16 allows easier tacking, better mast rotation and consistent mast bend! Reduce mast compression by 66%!  Use with one piece Aussie Jib Forestay. Or use an upper forestay and a separate Aussie Forestay. The Hobie 16 Aussie Jib Halyard Kit includes everything you need to connect your jib halyard to the Aussie forestay Pigtail: hardware with all Harken blocks, 70' of pre-stretched line, fairlead with rivets, zippered pouch and instructions. Class legal for racing.
    Hobie 16 Aussie Jib Halyard Kit with Pigtail Murrays Part# 001-3302 Reduce mast compression by 66%! The Aussie Jib Halyard Kit for the Hobie® 16 allows easier tacking, better mast rotation and consistent mast bend! Use with existing lower forestay. The "fail-safe" pigtail keeps block failure from resulting in de-masting. A similar system is stock on new Hobie 16's. Complete kit includes everything you need: hardware with all Harken blocks, 70' of prestretched line, zippered pouch and instructions. 80660000
    H-16 AUSSIE JIB HALYARD KIT
    Murrays Sports
    Hobie 16 jib traveler car 21380000, jib sheet block, slider, control...
    HOBIE 16 JIB TRAVELER CAR AND PULLEY
    Hobie
    Out of Stock
    Dolphin Striker Rod H16 Murrays Part# 50-20170001 Hobie® factory standard replacement dolphin striker rod fits all Hobie®16 dolphin striker posts and corner castings Hobie Part# 20170001
    H-16 DOLPHIN STRIKER ROD
    Hobie
    Out of Stock
    H16 Comp Tip Luff Track Murrays Part# 50-20616001 Hobie® factory replacement 93" luff track for Hobie® 16 with CompTip on mast.
    H-16 COMP-TIP LUFF TRACK
    Hobie
    Out of Stock
    Tracker: Bottom Roller (Post-1993) Murrays Part# 007-0112 Bottom roller with rivets for the tracker car on 1993 and later Hobie® 14, 16 and 17 's. This part allows you to rebuild your existing Hobie Traveler car by just replacing the track rollers and keeping the top half. This part can be installed on older boats if the matching Deep Track is installed as well. Fits Hobie Getaway Traveler Car. Hobie Cat Part# 112
    TRACKER BOTTOM ROLLER (POST 93)
    Hobie
    Out of Stock
    Tracker: Bottom Roller (Pre-1994) Murrays Part# 007-1060 The standard replacement bottom roller for all 1993 and earlier Hobie® 14 and 16s. Includes two rivets. Hobie Cat® factory item #106.
    TRACKER: BOTTOM ROLLER (PRE 94)
    Hobie
    Sale
    Murrays Deluxe Sail and Boom Bag - Will fit any Hobie sail, compatible with all Nacra and Prindle sails as well. The Hobie 16 has the widest sail of any Hobie and at a width of 109″
    MURRAYS DELUXE SAIL AND BOOM BAG
    Murrays Sports
    Save $50
    Quick-Release Convenience Package: H16 Murrays Part# 001-3231 This package makes set-up and take-down of your Hobie 16® more convenient. Kit includes: One #18-4R125 Quick Release Pin for hiking stick to crossbar connection. One #18-3M075L Quick Release Pin with Lanyard for mainsheet block to traveler car connection. One #21-1032 Quick Twist Halyard Shackle for jibsheet blocks to jib clew boom to mast connection. One #21-1155L Toggle Pin with Lanyard for forestay to adjuster connection. Four #01-0127 Car
    H-16 QUICK RELEASE CONVENIENCE PACKAGE
    Murrays Sports
    The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity. Compare to Hobie 50102011
    The Murrays Hobie 16 one piece rudder gudgeon is not cast but machined and then anodized for superior strength and longevity. Compare to Hobie 50102011
    MURRAYS H-16 ONE PIECE RUDDER GUDGEON
    Murrays Sports
    Out of Stock
    H14/16 Hawaiian Catamaran Righting System Murrays Part# 001-3293 The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    H-14/16 HAWAIIAN RIGHTING
    Murrays Sports
    The Hobie 16 main halyard comptip is used to raise the main sail on a Hobie 16 with a comptip on the mast. The main halyard comptip features a long rope section connected to a shorter wire section with a stopper and halyard shackle with a captured pin. The shackle connects to the head of the main sail and the stopper hooks into the main halyard hook and holds the sail up. Comptip masts are stock on all Hobie 16s since 1986. A comptip is the 10' fiberglass upper mast section of the mast 20617001
    The Hobie 16 main halyard comptip is used to raise the main sail on a Hobie 16 with a comptip on the mast. The main halyard comptip features a long rope section connected to a shorter wire section with a stopper and halyard shackle with a captured pin. The shackle connects to the head of the main sail and the stopper hooks into the main halyard hook and holds the sail up. Comptip masts are stock on all Hobie 16s since 1986. Hobie part number 20617001
    H-16 MAIN HALYARD COMPTIP
    Murrays Sports
    Hobie Rudder Covers Murrays PN 50-82420000 Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition). These come as a pair. Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    Hobie 16 spare parts kit, shackle tool, drain plugs, rudder pins, clevis pins and rings, 3/16" bow shackle, 1/4" bow shackle, batten tie strings, and 3 mast bearings. Pouch comes in assorted colors as available. Hobie #30305 and #30306.
    H-14/16 SPARE PARTS KIT:
    Murrays Sports
    Murrays Original Hobie 14 & 16 Jib traveler car for pre 1994 boats with the external track on the front crossbar. 21230000
    Murrays Hobie 16 Jib Traveler car. Jib Sheet. Hobie 16 front crossbar. Jib track, corner casting, blue trampoline
    MURRAYS H-16 JIB TRAVELER CAR
    Murrays Sports
    The Murrays Hobie 16 Jib Halyard Tension Kit allows sailors to quickly and easily adjust their jib halyard tension while under way.  This allows sailors to adjust their mask rake and rig tension to suit the conditions.
    H-16 JIB HALYARD TENSION KIT
    Murrays Sports
    Sale
    Comp-Tip Cover: H-16/18/20 Murrays Part# 31-2441 Hobie Cat recommends that CompTips on Hobie 16, 17, 18 and 20 be covered to protect them from ultraviolet light. Top quality polyester material is treated for UV-resistance and provides much better and long-lasting protection than nylon covers. Highly visible, red-tip reinforced end. Cover ties to mast with included line.
    H-16/18/20 COMP-TIP COVER
    Murrays Sports
    Save $26
    Out of Stock
    Hull Cradle: Bow Murrays Part# 13-7030
    HULL CRADLE: BOW
    Murrays Sports
    Aluminum Adjustable tiller extension for Hobie, Nacra and Prindle catamarans. Compare to Hobie 20550001 Hobie hot stick
    Murrays Part# 001-0062 Replacement tiller yoke assembly for all hiking sticks sold by Murrays. Used to connect the tiller extension to the tiller crossbar. Includes two contoured spacers that provide a solid platform for the yoke to sit on. Compare to Hobie Cat® Tiller yoke assembly #3205 or NACRA connection part tiller/joystick #31072 Applications: All Hobies and Prindles Tiller Yoke Assembly: 1
    TELESCPOING TILLER EXTENSION 50"-95"
    Murrays Sports
    H16 Mast Base Murrays Part# 50-20640011 The Hobie 16 Mast Base is the part that fits in the bottom of the mast and is attached to the mast with rivets. Works with all Hobie 16 sailboats. Attaches to bottom of Hobie 16 mast Use three (3) Part # 8010131 rivets to secure fitting Hobie Cat Part# 20640011
    H-16 MAST BASE
    Hobie
    HEAVY DUTY SWIVEL WITH ALUMINUM CAM & BULLSEYE
    Murrays Sports
    Out of Stock
    H16 Jib Car Slide Only with Wheels Hobie factory jib car slide for Hobie 16 with integrated jib track (standard equipment since late 2005). Hobie part number 25243003
    H-16 JIB CAR SLIDE ONLY WITH WHEELS
    Hobie
    HOBIE 14/16 GOOSENECK ASSEMBLY Murrays PN 50-10770001 Hobie factory replacement gooseneck assembly for Hobie 14 or 16. Hobie Cat item #10770001.
    H-14/16 GOOSENECK ASSEMBLY
    Hobie
    The Hobie 16 Main sheet Pro is 9mm Ronstan Robline Racing Sheet Pro which lighter and more flexible than the standard main sheet line. It flows thru the blocks quicker and is made with super strong Dyneema fiber for ultimate strength and anti stretch properties with added Taslan for improved grip and cleating. Racing Sheet Pro is soft in the hand and cleats superbly. Amazing in light air as it flows itself thru the blocks with less drag allowing the sails to go out on their own in less wind. Lighter, strong
    H-16 MAIN SHEET PRO
    Robline
    Out of Stock
    HOBIE SAIL AND BOOM BAG STANDARD
    Hobie
    Harken Swivel with Carbo Cam Bullseye Murrays Part# 25-3010 Swivel cam cleats are ideal for main traveler control and up-release jib cleating systems. Cam cleats and fairleads should be selected on the basis of need. Order plastic base pads and flat head screws separately to mount to your front crossbar.
    HEAVY DUTY SWIVEL WITH CARBO CAM & BULLSEYE
    Murrays Sports
    Hobie 16 Main Halyard Non-Comptip is a wire halyard for the all-aluminum mast (non Comp-Tip) Hobie 16 and is used to raise the main sail. Constructed to factory specifications, and includes a 2nd stopper as a reef point stopper. This is the standard halyard for Hobie 16's with an all aluminum mast which were standard before 1986. Hobie part number 20651011
    H16 MAIN HALYARD WITH LINE (NON-COMPTIP)
    Murrays Sports
    STRETCH RIGHTING H14/16/17/18 Murrays Part# 001-3294 The Murrays Stretch Righting Kit is our most popular righting line kit for catamarans such as Hobie® 14, 16, 17, 18 and 18SX. If the bow starts to bury, the line is readily available to both skipper and crew who can anchor themselves to keep from being catapulted forward. This beautifully simple system features easy-to-grip, 1/2" hollow braid line with internal shock cord that stretches for righting or trapezing and then recoils automatically
    H-14/16/17/18 STRETCH RIGHTING
    Murrays Sports
    Recently viewed