Hobie 16 Mast Parts

Hobie 16 Mast Parts

69 products

    Parts used with the H16 Mast

    69 products
    Out of Stock
    MAST ASSY W/COMPTIP Hobie 16 BLACK
    Hobie
    Out of Stock
    Comp-Tip Assembly H16 Murrays Part# 50-20611100 New Comp Tip assembly for Hobie 16. Hobie Part# 20611100
    COMP-TIP ASSY H-16
    Hobie
    This Hobie 16 Rigging set is a set of rigging for a Hobie 16 that was standard in 1995. This is a perfect upgrade your 70s, 80s, early 90’s boat to make it more modern.
    H-16 RIGGING KIT: 1995 SPEC BLACK RIGGING
    Murrays Sports
    Mast Float Mama Getaway Murrays Part# 007-30119
    MAST FLOAT MAMA GETAWAY
    Hobie
    Downhaul Kit: 6:1 Hobie 14/16 Murrays Part# 007-2089 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050). Hobie Part# 2089
    Downhaul Kit: 6:1 Hobie 14/16 Murrays Part# 007-2089 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo block. Includes Class-approved attachment for base of mast, all hardware and line. Use with gooseneck bearing kit (#12-2050). Hobie Part# 2089
    H-14/16 6:1 DOWNHAUL KIT
    Murrays Sports
    The Hobie Baby Bob Mast Float is designed to offer the safety and security of mast head flotation with minimized drag through the air, the Baby Bob is fixed in position to the mast head with the included mounting hardware. The Baby Bob is standard on all Hobie Waves This float will also fit the Getaway and Hobie 16 with or without CompTip. Some drilling may be necessary. The larger Mama Bob (#07-30119) is also an option for most Hobies. The Baby Bob Mast Float displaces 32 pounds of water, is 20" long x 1
    MAST FLOAT WAVE BABY BOB
    Hobie
    H14/16 Mast Bearing (Pack of 100) Murrays Part# 001-2042 Teflon® mast bearings for Hobie® 14 or 16 are .06" thick and will form to mast base with first use. Package of 100 mast chips.
    H14/16 MAST BEARING (100-PKG)
    Murrays Sports
    H14/16 6:1 Downhaul Kit Murrays Part# 007-2089-1 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks.  Includes: Class-approved mast track attachment, all hardware and line. Recommended for use with gooseneck bearing kit (#012-2050) Hobie Part# 2089
    Downhaul Kit: 6:1 Hobie 14/16 This Class-legal, complete 6:1 downhaul kit for Hobie 14 or 16 comes with Harken Carbo blocks. Includes: Class-approved mast track attachment, all hardware and line. Recommended for use with gooseneck bearing kit (#012-2050). Hobie part number 2089
    H-14/16 6:1 DOWNHAUL KIT
    Murrays Sports
    Downhaul Kit 3:1 Wave Murrays Part# 001-2029 This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver. This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    Downhaul Kit 3:1 Wave Murrays Part# 001-2029 This is a HCA and Formula Wave Class Legal downhaul kit. The Hobie Wave is a simple boat, and this simple kit helps make downhaul adjustments quick and easy. Installs in minutes with a Philips head screw driver. This can also be an intermediate downhaul kit for the H16 for recreational use, it's not class legal for HCA racing.
    WAVE DOWNHAUL KIT 3:1
    Murrays Sports
    Out of Stock
    Comp-Tip Mast Head H16 Murrays Part# 50-20614001 Hobie® factory replacement mast head with sheaves. Use four #19-5032 6-6 rivets for installation. This is the standard Hobie Part that comes with all comptip masts on Hobie 16s. This CompTip mast head also replaces the obsolete Hobie 16 mast head (no longer available) for all-aluminum mast. The original halyard will work if you move the halyard hook down to the appropriate height. Alternatively, a new comptip halyard #02-0273-60
    COMP-TIP MAST HEAD H-16
    Hobie
    H-16 AUSSIE JIB HALYARD KIT
    Murrays Sports
    COMP-TIP LUFF TRACK Hobie 16 93"(*)
    Hobie
    The Murrays Hobie 16 main halyard for is constructed to factory specifications with a long rope section and a shorter wire section with a stopper and halyard shackle. 20617001
    H-16 MAIN HALYARD COMPTIP
    Murrays Sports
    The Murrays Hobie 16 Jib Halyard Tension Kit allows sailors to quickly and easily adjust their jib halyard tension while under way.  This allows sailors to adjust their mask rake and rig tension to suit the conditions.
    H16 JIB HALYARD TENSION KIT
    Murrays Sports
    MAST BASE CASTING Hobie 16
    Hobie
    Hobie 16 Main Halyard with Shackle is a wire halyard for the all-aluminum mast (no Comp-Tip) Hobie 16 and is used to raise the main sail. Compare to Hobie Cat® #20651011
    H-16 MAIN HALYARD WITH SHACKLE
    Murrays Sports
    The Murrays Hobie 16 Roller Swaged Shroud is an upgrade to the stock shroud or sidestay for the Hobie 16. We use a hydraulic swager exerts a force of over 10,000 pounds to quickly swage without work-hardening the stainless fittings. Hydraulic swaging produces a cleaner, stronger shroud.
    H-16 HEAVY DUTY SHROUD 1/8" WIRE
    Murrays Sports
    H16/18/Getaway Mast Tang Murrays Part# 50-20690000 Hobie® factory replacement mast tang for Hobie® 16, 18, Getaway and the 1995 and newer Hobie® 17. Use twelve 6-4 rivets (#19-5031) and twelve casings (#19-5020) for installation. Also known as a mast hound
    H-16/18/GETAWAY MAST TANG
    Hobie
    Hobie 16 Mast head sheave - Old Style Murrays PN 51-16041711 The Hobie 16 Mast head sheave - Old Style is the large plastic pulley sheave that replaces the sheave in the original all aluminum Hobie 16 mast. Requires a 3/8" x 1.5" clevis pin or bolt to install Hobie 16 pre comptip masthead sheave.  Measures 4 7/8" x 3/8" with a 3/8" hole.
    HOBIE 16 MAST HEAD SHEAVE
    Hobie
    Downhaul Kit: H14/16 Murrays Part# 001-1028 This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast. This is a fantastic economical and simple solution for the recreational sailor. Hobie part number 2081
    Downhaul Kit: H14/16 Murrays Part# 001-1028 This class legal 3:1 downhaul kit for Hobie® 14 or Hobie 16 includes Harken bullet block with becket and swivel, and 6 feet of 3/16" low-stretch, 8-strand line. This kit works with the stock downhaul horn cleat at the base of the mast. This is a fantastic economical and simple solution for the recreational sailor. Hobie part number 2081
    H-14/16 DOWNHAUL KIT
    Murrays Sports
    MAST STEP LINK KIT H14/16 Hobie part number 21380001
    H-14/16 MAST STEP LINK KIT
    Hobie
    H16 Mast Hinge Kit Murrays Part# 001-3021 The Hobie 16 Mast Hinge Kit by Murrays aids in raising and lowering the mast of a Hobie® 16. Complete heavy duty hinge assembly includes special pins with retainers to prevent loss. This hinge requires complete removal before sailing. Note: This kit does not fit the newer style Hobie 16s, does not work on post 1993 Hobie 16s with the extreme mast rake, or on older boats with an updated mast step.
    H-16 MAST HINGE KIT
    Murrays Sports
    V JAM CLEAT BOOM (3/16" HOLES)
    Hobie
    Hobie Downhaul Cheek Block Murrays Part# 25-3340 The plastic sheave degrades and breaks on older Hobie® 16 downhaul cheek blocks and the entire block must be replaced. Also fits Sol Cat 18. Hole spacing 1/2" on center from side to side; 2-3/4" on center from end to end. To install, use four #19-5031 6-4 rivets and four #19-5020 sealing casings. Hobie Cat® Part# 20710000.
    HOBIE DOWNHAUL CHEEK BLOCK
    Hobie
    SUPER GOOSE H-17/18/20/21 This upgraded gooseneck by Tren Tec is constructed from a solid block of 6061-T6 aluminum and then finished with a coat of black hardkote anodizing. The Super Goose is for Hobie® 17 (newer), 18, 20 and 21; not compatible with older Hobie® 17 model. Hobie part number 1510
    H-17/18/20/21 SUPER GOOSE
    Tren-Tec
    Ronstan Mast Head Sheave (European) Murrays Part# 51-13041700 This is a downhaul sheave for the basic Hobie 16 Downhaul system. Hobie Europe factory replacement "halyard" sheave. But by the looks of their parts list its a down haul sheave that goes on the bottom of the gooseneck.
    RONSTAN MAST HEAD SHEAVE (EUROPEAN)
    Ronstan
    Quick Release Pin Standard 3/16 X 3/4" Murrays Part# 18-3R075 This quick-release pin has a standard head with a pull ring. Use two for convenient connection of jib sheet blocks on Nacra and Inter cats. Measurements are 3/16" diameter x 3/14" maximum grip length (distance from the shoulder to the locking ball bearings).
    QUICK RELEASE PIN STANDARD 3/16 X 3/4
    Misc
    Ronstan 5/16 bow with hole shackle RF638 - Hobie 20700001 and SP150081
    RONSTAN 5/16 BOWSHACKLE WITH HOLE
    Ronstan
    Hobie Sail Feeder Kit Murrays Part# 50-80100501 Replacement sail feeder for use on many Hobie Cat mast assemblies to make raising your mainsail easier than ever! Hobie®'s Sail Feeder helps the sail feed evenly into the mast track without catching and/or tearing the sail.
    HOBIE SAIL FEEDER KIT
    Hobie
    H14/16 Main Halyard Hook Murrays Part# 25-3330 The main halyard hook is used on the Hobie 14, Hobie 16, Wave, Getaway, Prindles, Sol Cats and Nacras that use a wire halyard. Use two 6-4 rivets (#19-5031) and two casings (#19-5020) for installation. Hobie part# 10680000
    H-14/16 MAIN HALYARD HOOK
    Hobie
    Hobie Gooseneck Hinge Vertex Murrays Part# 50-50772031 Hobie® factory replacement gooseneck vertex for all Hobie® Cats. Hobie Part# 50772031
    HOBIE GOOSENECK HINGE VERTEX
    Hobie
    Harken 22mm Block Murrays Part# 28-0224 This Harken ball bearing micro single block with stainless side plates is a small block with high load capabilities. It is a premium quality block for your trapeze return system.
    HARKEN 22MM BLOCK
    Harken
    Ronstan Stainless Steel Bow Shackle, 5/16" Pin, Coined Head with Hole Murrays Part# 21-0636 The Ronstan 5/16 Bow Shackle has 5/16" diameter pin. Compare to Hobie® #20700001 and SP150081. Standard all Hobie, Nacra and Prindle catamarans to attach the standing rigging to the mast tang.
    5/16 Bow Shackle
    Ronstan
    Harken 29mm Bullet Sheave Murrays Part# 28-0160 Harken's downhaul/halyard sheave makes raising the sail and/or adjusting the downhaul with Harken ball bearing sheaves much easier. This is a direct replacement for the sheaves that came with early Hobie 17s.
    HARKEN 29MM BULLET SHEAVE
    Harken
    Halyard Cleat Kit with Rivets Murrays Part# 001-1019 The Murrays Halyard Cleat Kit with Rivets pulls the halyard out of the way to keep the battens from hanging up on the halyard of an H16. The kit includes the halyard cleat and sealed stainless rivets. Center-to-center hole spacing is 31mm. *Photo is out of date and kit no longer comes with casings as the rivets that are included come sealed. Compare to Hobie Cat Part 10730000
    HALYARD CLEAT KIT WITH RIVETS
    Murrays Sports
    Downhaul Cleat with Screws Murrays Part# 001-1020 The Downhaul Cleat Kit is for mounting in mast track (such as Hobie 16) and includes cleat, screws and channel inserts. Center-to-center hole spacing is 1-1/8". We have another kit for the halyard cleats on the side of the mast that includes rivets.
    DOWNHAUL CLEAT WITH SCREWS
    Murrays Sports
    Out of Stock
    Comp-Tip Mast Head Sheave for H16 Wave Murrays Part# 50-20614210 CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer. The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole. The larger sheave for the obsolete mast head for all-aluminum mast is no longer available. Hobie Part number 20614210
    COMP-TIP MAST HEAD SHEAVE FOR H-16 & WAVE
    Hobie
    Mast Float Attachment Kit: H14/16 Murrays Part# 007-30116 This attachment kit for Hobie® 14 or 16 comes with Hobie® Mama and Baby Bobs, but is also offered separately here.
    H-14/16 MAST FLOAT ATTACHMENT KIT
    Hobie
    MURRAYS H-16 HALYARD GRIP KIT The Murrays H16 Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking.  Mostly used on the Hobie 16. Compare to Hobie part number 114
    MURRAYS H-16 HALYARD GRIP KIT
    Murrays Sports
    HOBIE HALYARD GRIP KIT The Hobie Halyard grip kit is a mast hook that hold the jib halyard off center on the mast so that the jib battens don't hang up on the jib halyard when tacking. Mostly used on the Hobie 16. Hobie part number 114
    HOBIE HALYARD GRIP KIT
    Hobie