Murrays Marine - Catamaran specialists

All Sailing Parts

3138 products

    Murrays Sports is your best one stop shop for beach catamaran parts and accessories.  We stock both OEM and aftermarket parts for Hobie Cat Catamarans, Nacra Catamarans, and Prindle Catamarans.  We also have parts for Dart, Sol-Cat, G-Cat, Sabot and O'Pen Skiff Sailboats.

    We manufacture many OEM parts for these boats and have a full rigging shop onsite.  We make most of our rigging orders and ship within 24 hours of being ordered.

    Murrays has kits to make your life easier. From Rigging sets, Line Sets, Rudder locking kits, Rudder cam kits, Mast hinge kits, spare parts kits, rudder rebuild kits, cat righting kits, pins and rings kits and more.

    We manufacture many hard to find parts and source parts as needed when the OEM manufacturers discontinue items.

    Murrays has the largest selection of tiller extensions available with aluminum, fiberglass and carbon version s available in fixed length and adjustable length hiking sticks.

    We make 3 generations of Hobie 16 rigging and can help you get what you need for your boat.

    Custom rigging - Murrays can handle custom rigging requests from 3/32, 5/32 and 1/8" wire.  We use top quality 316 stainless wire for the best longevity.  We use professional grade tools and have experienced craftsmen with years of experience handling the rigging.

    Email us lengths, wire type and end pieces for a custom rigging quote.  Send quote requests to info(at)murrays.com.  Use the @ symbol in our email address instead of (at).  If we post the address we get even more spam.

    We offer expert parts advice and can help with any size project from restoring a classic boat to maintaining a fleet of boats.

    We carry a full line of parts from Hobie, Harken, Nacra, Ronstan, Robline, Alpha Rope, Pelican Rope, and Rooster.

    Navigating Murrays.com: The 2 best ways to find the parts you need are to use the Search and the Shop By Boat section.

    The Search is at the top of the page and is for searching key words like Fairlead, 40mm block, cheek block, clew block, downhaul, Nacra Bridle etc. 

    The Shop By Boat section can be found in the dropdown menu. Click on the Pars by Boat menue header and then select your boat under the manufacturer.  Once on your boat you can shop by category: Mast Parts, Rigging, Boom Parts, Front Crossbar Parts, Rudder Parts, Upgrades and Accessories.

    We have hyperlinked Illustrated parts lists for the Hobie 16 and the Hobie Wave on their shop by boat pages.

     

     

    3138 products
    Hobie 18 forestay - Hobie part number 60810021 white or 60812021 black
    H-18/21SC FORESTAY 5/32" WIRE
    Murrays Sports
    $105.00
    Adjustable Leech Batten Caps H16
Murrays Part# 012-3003
No more knots at the trailing edge. Adjustable batten caps for Hobie® 16 enable sail shape adjustment in seconds without tying and untying knots. Release tension to prolong sail shape and life. This Perfect Pocket kit by Tren Tec includes 8 batten caps and pre-cut line.
    H-16 ADJUSTABLE BATTEN LEECH CAPS (8)
    Tren-Tec
    $16.98
    Batten Cap Leech H14/16/17/18 Main E

Murrays Part# 012-3003-1

No more knots at the trailing edge. Adjust sail shape in seconds without tying and untying knots. Release tension to prolong sail shape and life. Individual batten cap for Hobie 14, 16, 17 or 18 main sail.

Mainsail batten cap for Saturn shape main sail battens used on Hobie, Prindle some Nacra sails.

Trentec part number BC-HM

Compare to Hobie 11323000

Sold individually 
    H-14/16/17/18 MAIN BATTEN LEECH CAP
    Tren-Tec
    $2.25
    White Black Blue Red
    H-16 MAIN SHEET SPUN BRAID
    Robline
    from $46.00
    Rudder Locking Bolt

Murrays Part# 56-4017


The Prindle Rudder Locking Bolt is the factory replacement bolt for rudder locking system on all Prindles.

Tip: Be sure to check for proper alignment of the lock bolt to spring bolt. Any bent component will prevent the system from working properly. Identify and replace the bent portion to get your rudder system functioning properly.

Performance Sports factory item# 4017
    Prindle rudder locking system parts diagram.  Lock bolt, half round load spreader, lock nut.  Murrays.com
    PRINDLE RUDDER LOCKING BOLT
    NACRA
    $40.00
    Powerstick Cork Ball Grip Kit
    ARRIBA CORK BALL GRIP KIT
Murrays Part# 44-0002
The Cork Ball Grip Kit replaces the stock Arriba, Murrays Aluminum Tiller and Hot Stick end grips. The ball is predrilled, lightweight and makes the hiking stick easier to hold. The inside diameter is 1-1/8". Epoxy adhesive is included. Hobie Cat® item #FXGRIP.
Order epoxy (#00-0002-1) to "caramel-coat" the cork ball handle to make it last longer
    1.5" POWER STICK CORK BALL GRIP KIT
    Murrays Sports
    $16.00
    H14/16 Hawaiian Catamaran Righting System

Murrays Part# 001-3293

The Hawaiian Catamaran Righting System doubles as a preventer line. Big 1/2" braided righting line is suspended by shock cord under the trampoline. Lines terminate at the transom. Behind-the-back support allows lighter crews to combine weight or solo skippers to have a free hand for scooping up water (as with the Bucket Up Righting Aid) to add leverage. Racing class legal.
    H-14/16 HAWAIIAN RIGHTING
    Murrays Sports
    $115.00
    Hobie 378 Replacement vane for Telo-Cat™ and Black Max is constructed of tough, high-impact plastic vane with visible trim markings.
    TELO-CAT REPLACEMENT VANE - DISCONTINUED
    Davis
    $25.00
    Rudder Blade EZ Lock With Indents

Murrays Part# 50-20491000



Hobie is no longer producing two different nylon rudder blades. Use this part to replace your plastic rudder blades for Hobie 14, 16, 17 and 18 beach cats. This is the standard part that comes on Hobie Wave and Hobie Getaway boats with EZ Loc rudder systems
    RUDDER BLADE EZ LOCK WITH INDENTS
    Hobie
    $215.99
    WAVE MAST BASE new S/N 1438 UP
    Hobie
    $57.99
    Hobie 16 Rigging Set 2009 Spec


All parts needed for 2021 Race Ready Boat! If you're trying to update your old boat or just need new rigging for your late model Hobie 16, this is the complete package. Whether your racing or just putting around the lake, this kit is accommodates the current rigging standard for factory sails and production boats. All of our rigging is made from 316 stainless steel wire. Thimbles are swaged using our custom hydraulic swaging machine for years of reliable service.
    H-16 RIGGING SET 2009 SPEC
    Murrays Sports
    $325.00
    Jib Clew Pigtail Kit

Murrays Part# 001-4015


Easy-connect Dyneema® jib clew pigtail. Speed up tacks and improve sail shape by moving jib clew blocks away from the jib clew.

Color may vary from picture.

Features:

jib Clew Pigtails move jib clew blocks about 14" from jib clew— saves 4 feet of sheeting/unsheeting per tack!
"Locked" eye splices— jib blocks cannot slip or un-tie.
Save weight (only 2.4oz) and move weight away from jib clew— better sail shape in light wind.
Lightweight, easy-connect—
    jib clew pigtail attachment close up
    JIB CLEW PIGTAIL KIT
    Murrays Sports
    $39.95
    Ronstan Bullseye with Ferrule

Murrays Part# 25-0323



Stainless ferrule eliminates with nylon housing, the stainless center coating prevents grooving and wear from uses. Allows for up to 7/16" line capacity.

Mounting: Two screws ordered separately (#10-32x1") part number 19-2915.
    RONSTAN BULLSEYE FAIRLEAD WITH FERRULE
    Ronstan
    $8.20
    6815 Prindle mast hinge with pins.  Used to raise the mast on the Prindle 15, 16, 18 18.2 and 19.
    6815 Prindle mast hinge with pins.  Used on the Prindle 15, 16, 18 18.2 and 19.
    PRINDLE MAST HINGE KIT
    Murrays Sports
    $32.50
    Used for tiller connection on Hobie Cats®. The stainless 1/4-20 stainless steel hex nut with nylock insert will not rust or work loose if properly installed. Equivalent to Hobie #8050111. Also Equivalent to Nacra/Prindle F123 gudgon nut for all Prindle and older Nacras.
Applications:
Hobie 18 / H18:
Bow Tang Nut Qty: 6
Rudder Adjustment: 1
Hobie Getaway: Forestay Yoke Nut
    NYLOCK NUT 1/4-20 SS
    Misc
    $0.45
    Clevis Pin 1/4 X 1-1/8
Murrays Part# 22-9803
Stainless steel clevis pin measures 1/4" diameter x 1-1/8" grip length (shoulder to the split ring hole).
Compare to Hobie Part 8020420 and 8020410
    CLEVIS PIN 1/4 X 1-1/8"
    Misc
    $2.99
    Traveler Ball Bearing H18 61852000

Murrays Part# 50-61850000

The Traveler Ball Bearing H18 is the stock Hobie 18 Main sheet traveler car ball beaing. This ball can be used in place of cylinder bearing #50-61860000 to bring the traveler back to what came stock on the Hobie 18.

The difference between the traveler ball and the cylinder is that the balls allow the car to move faster but they wear down quicker. Hobie has stopped making the Hobie 18 traveler balls, but Murrays found their source and made more!
    Hobie 18 main traveler car parts list - 6180001, 8040301, 61870000, 61880000, 60190000, 8050311, 61842000, 8060121, 61810000, 61830000, 61852000, 8020431
    H-18 TRAVELER BALL BEARING
    Murrays Sports
    $13.50
    H-16 JIB BATTEN 44"

44" Murrays jib batten with a trentec batten cap.  

Batten #3 in a Hobie jib batten set - 20400001

It is also use for the batten #8 on a Hobie 16 main sail batten set - 21000001
    H-16 JIB FIBERGLASS BATTEN 44"
    Murrays Sports
    $28.99
    Rudder Pins H14/16 Pair (Nylon)

Murrays Part# 001-2271

Nylatron rudder pins are sacrificial for use in the surf (they'll break before your rudder system does) and should be inspected often for wear. Pair of 3/8" x 8" rudder pins with cotter pins for Hobie® 14 or Hobie® 16.

Each pair is equivalent to two Hobie Cat® item #10881000

Sold in pairs
    H-14/16 NYLON RUDDER PINS PR
    Murrays Sports
    $19.00
    The tune-up kit for Hobie® roller furling drum 61900000 includes all of the items that commonly wear or break (bearings, bearing cage, nyliner, nylon sleeve, darby rings, spool and housing). Murrays.com
    HOBIE ROLLER FURLER TUNE-UP KIT
    Hobie
    $74.99
    Out of Stock
    SK78 MINI DYNEEMA SPOOL 2MM
    Robline
    $23.90
    Mast Ball H17  Wave
Murrays Part# 50-50212301
Hobie factory replacement mast ball for Hobie® 17 and Wave. Ball measures 1-1/2" diameter with a 9/16"-18 threaded hole. This ball can also be glued for use on Trac 16.
    H-17/WAVE MAST BALL
    Hobie
    $39.99
    H16/18 Jib Halyard Block Assembly

Murrays Part# 50-20240001


Wire jib halyard block for Hobie 16 or 18 has a sheave diameter of 1-1/2". This is a good upgrade for boats with jib halyard blocks that have a diameter smaller than 1-1/2".

Hobie part# 20240001
    Hobie 16 forestay and jib halyard parts chart
    HOBIE 16/18 JIB HALYARD BLOCK ASSEMBLY
    Hobie
    $84.99
    Clevis Pin 1/4 X 3/4"

Murrays Part# 56-4012



The Clevis Pin 1/4 X 3/4" is used on Prindle rudders, Nacra mast head sheave and as Nacra/Prindle shroud pin.

Prindle Part# 4012
    CLEVIS PIN 1/4 X 3/4"
    NACRA
    $2.70
    Harken Sail Chafe Protector

Murrays Part# 28-0285



Harken's Sail Chafe Protector Set replaces the diamond wire rollers to protect the jib from chafing on the diamond wire spreader. The split rollers are pre-drilled to fit up to 3/16" wire. Each 2-3/4"-diameter (70mm) protector has two pieces that snap together for easy installation. Used on Hobie 18, Hobie 20, Prindle 18.2, Prindle 19, Nacra 15, 17, 18, Inter 20, F18
    HARKEN SAIL CHAFE PROTECTOR (2)
    Harken
    $44.00
    Harken 38mm Standard Eyestrap

Murrays Part# 28-0137

Eyestrap fits #28-0150 and #28-0365 cams. 3000 lb. breaking strength. Use 1/4" RH fasteners with 1-1/2" spacing.
Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads.
    HARKEN 38MM STANDARD EYESTRAP
    Harken
    $3.83
    Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole).

Uses:

This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles.

Hobie 18 main traveler car 

Prindle Part# 6004

 Comparable to Hobie Cat® Part# 8020431
    1/4 X 1-3/8" Clevis Pin

Murrays Part# 22-9804

Stainless steel clevis pin. Measurement is 1/4" diameter x 1-3/4" grip length (shoulder to the split ring hole).

This pin replaces #56-7809, gooseneck clevis pin for Nacra 5.2 and all Prindles.

Prindle Part# 6004

Comparable to Hobie Cat® Part# 8020431
    CLEVIS PIN 1/4 X 1-3/8"
    Misc
    $3.30
    Getaway Mast Base Casting

Murrays Part# 50-37641001

Hobie® factory replacement mast base casting for Getaway. Use four #19-5032 stainless rivets and four #19-5020 casings for installation.
    GETAWAY MAST BASE CASTING
    Hobie
    $97.99
    Hobie Rudder Covers

Murrays PN 50-82420000

Rudder covers by Hobie protect your rudders from nicks and grime. Hobie's rudder covers feature straps with Fastex® fasteners to keep the covers firmly in place, even when trailering. The covers fit all Hobies except H21SE (Special Edition).

These come as a pair.

Hobie part number 82420000
    HOBIE RUDDER COVER
    Hobie
    $114.99
    Murrays Part# 001-1130

Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings. We suggest purchasing Can't Miss Rings (#01-0124) to supply a handle down low when needed. Order shock cord separately
    Adjustable on the fly and there is no need to cut your trapeze wires for installation! This simplified version of the Hi-low Trapeze Kit utilizes a lower profile block system without the intermediate handle, so there is no need to shorten the trapeze wires. Includes V-jam cleats, back-to-back Ronstan bullet blocks, rope locks and line. Does not include trapeze rings.  Show with can't miss rings and trap shock cord.  Hobie part 1204
    HIGH-LOW TRAPEZE ADJUSTMENT KIT: NO CUT
    Murrays Sports
    $129.00
    H-16 JIB CLEW BLOCK KIT
    Murrays Sports
    $40.00
    Hobie Mast Step Pin 3/16 x 2 1/8" - 8020080

Replacement Hobie 14 and Hobie 16 mast step pin.

Measures 3/16" x 2-1/8"

Used with the Hobie mast step link kit 21380001 for raising and lowering the mast on a Hobie 14 and 16.

Also called Hobie 16 mast hinge pin, mast step hinge pin, mast base pin, mast step link pin...

Hobie part number 8020080
    HOBIE MAST STEP PIN 3/16 X 2 1/8 - 8020080
    Hobie
    $11.99
    The Prindle 16 Forestay 1/8" with turnbuckle for Prindle 16 is constructed to factory specifications.

Available with black or white coating

Prindle part number 9039



​Made to order in Carpinteria California, modifications and customization available upon request.
    PRINDLE 16 FORESTAY WITH TURNBUCKLE
    Murrays Sports
    $115.00
    Ronstan 50mm ClearStart Sailing Watch
    Black Blue Red
    RONSTAN 50MM CLEAR START SAILING WATCH
    Ronstan
    $89.00
    PROPELLER GUARD FOR TORQEEDO CRUISE MOTORS
    Murrays Sports
    from $350.00
    5"X12" Zip Pouch-Assorted Colors

Murrays Part# 31-1401

The Murrays Zip Pouch 5"X12" is constructed of rugged, water-resistant material with plastic hooks at each end to attach to the center or aft tramp lacing. The pouch provides handy storage for replacement parts, keys, and safety gear. Assorted colors. We have this pouch made for us right here in the U.S.A.

Compare to Hobie Cat® stow bag #72000B and 72005B
    5"X12" ZIP POUCH-ASSORTED COLORS
    Murrays Sports
    $27.50
    Murrays Hobie 16 Trampoline Cover
    Hobie 16 Trampoline Cover - canvas yard cover
    MURRAYS H-14/16 TRAMPOLINE COVER
    Murrays Sports
    $260.00
    Roller Furling Drum Forestay Adjuster

Murrays Part# 50-60830000

Hobie® factory replacement 13-hole adjuster for roller furler.

Hobie Part# 60830000
    ROLLER FURLING DRUM FORESTAY ADJUSTER
    Hobie
    $14.99
    Eyestrap Wave Bridle
Murrays Part# 50-38120011
​Hobie® factory replacement eyestrap for Hobie Wave bridle.
    WAVE BRIDLE EYESTRAP
    Hobie
    $11.99
    Spare Parts Kit: H18

Murrays Part# 001-4221

Why lose a weekend of sailing due to a missing part? Stored in a 5" x 12" zippered pouch, this kit for Hobie® 18 contains the most frequently lost and needed items. Includes shackle tool, two drain plugs with gaskets, aluminum rudder pins, clevis pins and rings kit, 3/16" bow shackle, 1/4" bow shackle and batten tie strings. Pouch comes in assorted colors. Compare to Hobie Cat® #30307.
    H-18 SPARE PARTS KIT:
    Murrays Sports
    $95.00
    Recently viewed