Murrays Marine - Catamaran specialists

All

3154 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3154 products
    Out of Stock
    Crossbar Insert Right Front & Left Rear H17 Black Murrays Part# 50-50121511 Hobie® factory replacement right front/left rear crossbar insert for Hobie® 17 Hobie Part# 50121511
    H-17 CROSSBAR INSERT RF/LR
    Hobie
    H17 Rear Crossbar Backup Plate Murrays Part# 50-50253001 Backup plate for Hobie 17 rear crossbar assembly. Hobie Part# 50253001
    H-17 REAR CROSSBAR BACKUP PLATE
    Hobie
    Out of Stock
    Corner Casting Race Rear Right H14/16 Murrays Part# 50-10202011 Hobie® factory replacement left rear corner casting (#3) for Hobie® 14 or 16. This part replaces Hobie Cat's discontinued item #10200011. Use six 6-8 rivets (#19-5033) for installation. Rear Crossbar casting for Hobie 16.
    H-14/16 CORNER CASTING RACE REAR RIGHT
    Hobie
    H14/16 Corner Casting Race Rear Left Black Murrays Part# 50-10212011 Hobie® factory replacement left rear corner casting (#4) for Hobie® 14 or 16. This part replaces Hobie Cat's discontinued item #10210011. Use six 6-8 rivets (#19-5033) for installation.
    H-14/16 CORNER CASTING REAR LEFT-RACE BLACK
    Hobie
    Corner Casting Front Left Black H14/16 Murrays Part# 50-10150011 Hobie® factory replacement left front corner casting (#1) for Hobie® 14 or 16. Requires six 6-8 rivets (item #19-5033) for installation
    H-14/16 CORNER CASTING FRONT LEFT-BLACK
    Hobie
    Comp-Tip Mast Head Sheave for H16 Wave Murrays Part# 50-20614210 CompTip Mast Head Sheave for Hobie 16 or Wave, is the sheave found at the top of the comptip assembly. Two sheaves are used in each assembly. The sheaves each ride on a, comptip sheave spacer. The sheave is 9/16" wide x 2 1/4" diameter with 3/8" hole. The larger sheave for the obsolete mast head for all-aluminum mast is no longer available. Hobie Part number 20614210
    H-16/WAVE COMP-TIP MAST HEAD SHEAVE
    Hobie
    Out of Stock
    Cooler Lid Getaway Murrays Part# 50-37370021 Hobie Part# 37370020 (formerly 37370021)
    GETAWAY COOLER LID
    Misc
    Out of Stock
    H14/18/18SX/20/Wave Comp-tip Luff Track 87" Murrays Part# 50-38584001 Hobie factory replacement 87" luff track for Hobie Cats except Hobie 16 and Getaway.  Older H18 comp tips were one long piece of plastic, newer boats have two sections. This plastic piece, and shorter aluminum piece. If you are replacing an older one piece luff track, you will also need to purchase the aluminum top section as well.
    H-14/18/18SX/20/WAVE COMP-TIP LUFF TRACK
    Hobie
    Comp-Tip Assembly H16 Murrays Part# 50-20611100 New Comp Tip assembly for Hobie 16. Hobie Part# 20611100
    HOBIE 16 COMP-TIP ASSEMBLY
    Hobie
    H14 Comp-tip Assembly Murrays Part# 50-10582100 Hobie® factory CompTip assembly for Hobie 14.
    H-14 COMP-TIP ASSEMBLY
    Hobie
    Out of Stock
    Compression Plate Assembly Kit H18 Murrays Part# 50-60680001 Hobie® factory mast compression plate assembly kit for Hobie 18 and 18SX
    H-18 COMPRESSION PLATE ASSEMBLY KIT
    Hobie
    Out of Stock
    Centerboard Spring H17 Murrays Part# 50-50350140 Hobie® factory replacement centerboard spring for Hobie 17 Hobie Part# 50350140
    H-17 CENTERBOARD SPRING
    Hobie
    PVC Centerboard Pivot Tube Murrays Part# 56-1029 PVC centerboard pivot tube is Performance Sports factory item #1029
    PVC CENTERBOARD PIVOT TUBE
    NACRA
    Out of Stock
    Centerboard Pivot Pin H17 Murrays Part# 50-50104001 Hobie® factory replacement centerboard pivot pin for Hobie® 17 Hobie Part# 50104001
    H-17 CENTERBOARD PIVOT PIN
    Hobie
    Out of Stock
    Nacra Center Post Bridle Foil Murrays Part# 56-9663 Center post for Nacra bridle foil. Performance Sports factory #9663 Nacra Sailing #30303.
    NACRA CENTER POST BRIDLE FOIL
    Murrays Sports
    Out of Stock
    Centerboard Handle H17 Murrays Part# 50-50702001 No longer available - Discontinued by Hobie Hobie Part# 50702001
    H-17 CENTERBOARD HANDLE
    Hobie
    Murrays fiberglass hull repair kit for Hobie, Nacra and Prindle catamarans
    CAT KEELS KIT WEST SYS EPOXY
    Murrays Sports
    27" Carbon Snuffer Pole Extension Murrays Part# 56-9638 Carbon 27" snuffer pole extension with ferrule and end cap Performance Sports factory item# 9638
    NACRA CARBON SNUFFER POLE EXTENSION 27"
    NACRA
    Out of Stock
    Bridle Foil Rod with Screw Adjuster N5.8, 6.0 Murrays Part# 56-9669
    NACRA 5.8, 6.0 BRIDLE FOIL ROD WITH SCREW ADJUSTER
    NACRA
    Bridle Eye 56-1865 Factory replacement bridle eye for F18 Infusion.
    NACRA BRIDLE EYE
    NACRA
    Hobie Hull Cradle Bracket Murrays Part# 50-48020001 Sold individually
    HOBIE HULL CRADLE BRACKET
    Hobie
    Bow Foil End Tang Murrays part# 56-9667 End tang for bridle foil attachment i Nacra Sailing factory item #30306
    NACRA BOW FOIL END TANG
    NACRA
    Out of Stock
    Bow Spreader Pole Wave Murrays Part# 50-38999021 Hobie® factory replacement bow spreader pole only for Wave. Hobie Part# 38999021
    WAVE BOW SPREADER POLE
    Hobie
    Bow Eye Screw 56-1805 Factory stainless steel bow eye screw for Inter 18
    NACRA BOW EYE SCREW
    NACRA
    Out of Stock
    Boomlet HC17 SE to Sport Conversion Murrays part# 50-52722011 Make it much easier to move from one side of a Hobie® 17 to the other while tacking or jibing by removing the boom. Easily convert 1995 and newer Hobie® 17 SE race boats by adding the Hobie factory Boomlet. Hobie part# 52722011
    H-17SE TO SPORT BOOMLET CONVERSION
    Hobie
    Boom Outhaul Car Murrays Part# 56-7907 Internal boom outhaul car for all Prindles, Nacra 5.2 and Inters. Nacra Sailing factory item# 30206
    PRINDLE/NACRA/INTER BOOM OUTHAUL CAR
    NACRA
    Out of Stock
    Boom End Cap H18 Aft Murrays Part# 50-60760011 Hobie® factory replacement aft end cap for Hobie 18 boom. Hobie part# 60760011
    H-18 AFT BOOM END CAP
    Hobie
    Out of Stock
    Boom End Cap H20 Forward Murrays Part# 50-40741021 Hobie® factory replacement end cap for forward end of Hobie 20 boom. Hobie part# 40741021
    H-20 FORWARD BOOM END CAP
    Hobie
    H17 Boom End Cap Murrays Part# 50-50513011 Hobie® factory replacement aft end cap for Hobie 17.
    H-17 BOOM END CAP
    Hobie
    Out of Stock
    Boom End Cap H17 Forward Murrays Part# 50-50512001 Hobie® factory replacement forward end cap for Hobie 17 boom.
    H-17 FORWARD BOOM END CAP
    Hobie
    Out of Stock
    H-20 BOOM ASSEMBLY
    Hobie
    Out of Stock
    Boom Assembly H16 Black Murrays Part# 50-20720011 Black boom assembly for Hobie® 16 includes end caps, block hanger, and barrel cleat. Order gooseneck assembly separately. This boom is normally a special order item. Hobie Part# 20720011
    H-16 BOOM ASSEMBLY-BLACK
    Hobie
    Out of Stock
    Boom Assembly H17 Black Murrays Part# 50-50510000 Hobie® factory replacement black boom assembly for Hobie® 17.  Hobie part# 50510000
    H-17 BOOM ASSEMBLY-BLACK
    Hobie
    Book: Freestyle Windsurfing Murrays Part# 45-0181 Includes explanations and hints, along with hundreds of photographs, demonstrating moves suitable for beginners as well as advanced freestylers. The 128-page paperback book by Roger Jones has a copyright date of 1983. Limited to stock on hand.
    BOOK: FREESTYLE WINDSRFING
    Misc
    BONEZ BOARD STACKERS (PAIR)
    Murrays Sports
    Bolt Rudder Hold Down Murrays Part# 19-3011 ​Rudder hold down bolt for Inters is Nacra Sailing factory Part# 30357
    NACRA BOLT RUDDER HOLD DOWN
    NACRA
    Rear Crossbar Bolt 3/8-16X4.5 Hex Head Murrays Part# 56-F181 Rear crossbar bolt for Inters, Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS. Performance Sports factory item# F181
    NACRA REAR CROSSBAR BOLT 3/8-16X4.5"
    NACRA
    NACRA/PRINDLE BOLT FOR GUDGEON 1/4-20X1.25"
    NACRA
    Bolt 5/16 X 18 X3.5" Murrays Part# 50-8040371 Hobie® factory replacement 5/16-18 x 3-7/16" bolt. Pylon bolt for Hobie® 14 and older 16 (1994 and prior; starting in 1995, boats had newer style castings/pylons). Hobie Part# 8040371
    BOLT 5/16 X 18 X3.5"
    Hobie
    Inter Bolt Front Beam 3/8-16X4.5" Murrays Part# 56-F180 Socket head 3/8 x 4-1/2" front beam bolt for all Inters Compatible Boats:  Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS. Performance part# F180
    NACRA BOLT FRONT BEAM 3/8-16X4.5"
    NACRA
    Recently viewed