Murrays Marine - Catamaran specialists

All

3171 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3171 products
    Out of Stock
    H20 Comtip Murrays Part# 50-40401210 Hobie® factory replacement Hobie 20 CompTip. A CompTip is the upper section of Hobie mast built in or after 1968. Fiberglass and non-conductive, it is designed to prevent electrocution by contact with a high power line.
    H-20 COMPTIP
    Hobie
    Out of Stock
    H18/20 Comptip Mast Head Murrays Part# 50-60602041 Hobie 18/20 Comp Tip Mast Head factory replacement mast head for Hobie® 18 or 20 with Comp Tip.
    H-18/20 COMPTIP MAST HEAD
    Hobie
    H18 Jib Sail With Window (White) Murrays Part# 50-60992011 Hobie factory replacement sail is Hobie class legal for racing. The only current production color is white, but custom color jibs are available for special order. Hobie will typically have access to any color that is currently being used on their production boat sails. Contact for current color availability and lead time.
    Hobie 18 JIB SAIL WITH WINDOW (WHITE) OEM
    Hobie
    H18 Dolphin Striker Rod Murrays Part# 50-61170001 Hobie® factory replacement dolphin striker rod for Hobie 18.
    H-18 DOLPHIN STRIKER ROD
    Hobie
    Out of Stock
    H-18 FRONT CROSSBAR INBOARD SUPPORT CASTING KIT
    Hobie
    Out of Stock
    H18 Crossbar Casting Rear Left Black Murrays Part# 50-60210011 Hobie® factory replacement left rear crossbar casting for Hobie® 18
    H-18 CROSSBAR CASTING REAR LEFT-BLACK
    Hobie
    Out of Stock
    H17 Sport Spreader Pole Extender Murrays Part# 50-50511011 Hobie factory spreader pole extension for the Hobie 17 Sport
    H-17 SPORT SPREADER POLE EXTENDER
    Hobie
    Out of Stock
    H18 Crossbar Casting Right Rear-Black Murrays Part# 50-60200011 Hobie® factory replacement right rear crossbar casting for Hobie® 18
    H-18 CROSSBAR CASTING RIGHT REAR-BLACK
    Hobie
    Out of Stock
    H18 Boom Assembly-Black Murrays Part# 50-60720011 Hobie® factory replacement part: The black Hobie 18 boom assembly includes all integrated accessories pictured. Main sheet block hangers, out haul cleat, outhaul traveler, mast rotation cleat, endcaps and gooseneck pin. Hobie Part#60720011
    H-18 BOOM ASSEMBLY-BLACK
    Hobie
    Out of Stock
    H17 Comptip Assembly Murrays Part# 50-50611101 Hobie® factory replacement CompTip assembly for Hobie 17
    H-17 COMP-TIP ASSEBLY
    Hobie
    Out of Stock
    H17 Aft Crossbar Extrusion Murrays Part# 50-50261001 Hobie® factory replacement aft crossbar extrusion for Hobie 17.
    H-17 AFT CROSSBAR EXTRUSION
    Hobie
    Out of Stock
    H16 Vinyl Trampoline-White Murrays Part# 50-20970000 Hobie 16 White Vinyl Trampoline is less expensive than mesh and offers spray protection, so you stay warmer on cool, choppy days. Hobie Cat makes vinyl tramps only in white; colors are available only in mesh. Class legal for Hobie racing.
    H-16 VINYL TRAMPOLINE-WHITE
    Hobie
    Out of Stock
    H16 Jib Sail (Seabreeze) Murrays Part# 50-20992088 Hobie Cat factory Seabreeze jib sail for Hobie 16. Colors may vary slightly from image.
    H-16 JIB SAIL (SEABREEZE)
    Hobie
    Out of Stock
    H14/16 Mast Step-Black Murrays Part# 50-20200011 This is a factory Hobie 14*/16 Mast Step Black replacement. For Hobie 14s and Hobie 16s.  This is the post 2004 version. The first hardware change was in the early 80s. The mast step was angled further back and the mast base was adjusted to match. If you are replacing an original pre-1980 mast step you will need new rigging to accommodate the increased mast rake.
    H-14/16 MAST STEP-BLACK
    Hobie
    Out of Stock
    H14 Front Crossbar Murrays Part# 50-10131910 Hobie 14 Front Crossbar without casting
    H-14 FRONT CROSSBAR
    Hobie
    The Gath helmet hinge kit: peak visor contains all the hardware for installing a peak visor to your Gath Gedi or Surf Convertible helmet.
    The Gath helmet hinge kit: peak visor contains all the hardware for installing a peak visor to your Gath Gedi or Surf Convertible helmet.
    GATH HINGE KIT: PEAK VISOR
    Gath
    Rear Hex Bolt 5/16 X 5.75" Outboard Bolt Murrays Part# 56-F141 5/16" x 5-3/4" hex cap bolt is for Prindle rear crossbar. Performance Sports Factory item# F141
    PRINDLE REAR HEX BOLT 5/16 X 5.75" OUTBOARD BOLT
    NACRA
    Harken 12:1 Mainsheet Carbo Ratchamatic Base Harken 57 mm triple fiddle with reinforced cam arms that is used for 12:1 mainsheet systems on beach cats. Low-friction Carbo AirBlocks® are lightweight, strong, reliable and affordable. Companions to the popular Harken® Black Magic® line, these small, compact blocks have very high working loads for safe, easy trimming.
    HARKEN 12:1 MAINSHEET CARBO RATCHAMATIC BASE
    Harken
    Hex Bolt5/16 X 4.25" Murrays Part# 56-F104 Hexcap bolt measures 5/16 x 4-1/4" and is used on the front crossbar (outboard) of Prindle 15/16/Escape and older Nacras. Performance Sports factory item #F104.
    PRINDLE/ESCAPE/NACRA HEX BOLT 5/16 X 4.25"
    NACRA
    Harken 12:1 Mainsheet Carbo Boom Block Murrays Part# 56-9966 Harken 57mm triple fiddle block with swivel used for 12:1 mainsheet systems on beach cats. Low-friction Carbo AirBlocks® are lightweight, strong, reliable and affordable. These small, compact blocks have very high working loads for safe, easy trimming. Specifications: Sheave Diameter: 2-1/4" Length: 6" Maximum Line Diameter: 7/16" Maximum Working Load: 2380 lb. Breaking Strength: 5000 lb. Weight: 11.15 oz. Harken Part# HSB379
    HARKEN 12:1 MAINSHEET CARBO BOOM BLOCK
    Harken
    Harken 10:1 Mainsheet Carbo Air Base Block Murrays Part# 56-9953 This Carbo AirBlock® has an enormous working range, with a higher working load than a standard block, even though it is lighter in weight. The Carbo Ratchet block allows sailors to hand-hold loaded lines and offers balance between holding power and controlled easing. The base block has an on-off ratchet and will roll freely in both directions when disengaged, such as in light air.
    HARKEN 10:1 MAINSHEET CARBO AIR BASE BLOCK
    Harken
    Harken 57mm 5-Sheave Block-Swivel Murrays Part# 56-9955 Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to our popular Harken Big Boat blocks, these small, compact blocks have very high working loads for safe, easy trimming. Harken Part# 2762
    HARKEN 57MM 5-SHEAVE BLOCK-SWIVEL
    Harken
    Out of Stock
    H18 Main Fiberglass Batten Set Murrays Part# 46-3050 Fiberglass battens are stronger and less expensive than foam battens, but also heavier. This batten set for Hobie® 18 main does not include leech caps.
    H-18 MAIN FIBERGLASS BATTEN SET
    Murrays Sports
    Out of Stock
    H-18 CLASS SAIL INSIGNIA
    Hobie
    Out of Stock
    H18 Aft Crossbar Extrusion-Black Murrays Part# 50-60191211 Hobie® factory replacement H18 Black Aft Crossbar Extrusion.
    H-18 AFT CROSSBAR EXTRUSION-BLACK
    Hobie
    Out of Stock
    H16 Jib Sail (Turquoise) Murrays Part# 50-20992071 Turquoise jib for the Hobie 16. Made by Hobie Cat and works on any Hobie 16 sailboat.
    H-16 JIB SAIL (TURQUOISE)
    Hobie
    Out of Stock
    H16 Main Fiberglass Batten Set Murrays Part# 46-3020 Saturn shaped fiberglass Hobie factory main sail batten set. This set includes all eight battens with both luff and leech caps for Hobie 16 main sail.  Hobie Part# 21000001
    H-16 MAIN FIBERGLASS BATTEN SET
    Murrays Sports
    H14 Rear Crossbar without Castings Murrays Part# 50-10191910 Hobie® factory replacement rear crossbar only for Hobie® 14
    H-14 REAR CROSSBAR
    Hobie
    Out of Stock
    H14 Main Batten Set Murrays Part# 46-3011 Hobie factory saturn shaped fiberglass battens for a Hobie 14 main sail. They are cut to length and can be shortened as necessary for your sail. This is how Hobie makes their sets! Batten caps are included.
    H-14 MAIN BATTEN SET
    Murrays Sports
    N5.2/5.5/5.8 Wide Gudgeon Murrays Part# 56-1010 Wide gudgeon fits Nacra 5.2, 5.5, 5.8 and 18-square Nacra Sailing factory item# 30006
    NACRA WIDE GUDGEON
    NACRA
    TIGER GUDGEON SCREW 2008
    Hobie
    PRINDLE EXTENDED GUDGEON
    NACRA
    Narrow Gudgeon Murrays Part# 56-1011 Narrow gudgeon fits Nacra 5.0, 5.7, 6.0 and Prindle 18-2 and 19 Nacra Sailing factory item# 300007
    PRINDLE/NACRA NARROW GUDGEON
    NACRA
    GOOSENECK 'U' BRACKET Murrays Part# 56-7810 Prindle Gooseneck 'U' Bracket Gooseneck "U" bracket fits Nacra 5.2 and all Prindles. Nacra Sailing factory item# 30980
    PRINDLE/NACRA GOOSENECK 'U' BRACKET
    NACRA
    Gooseneck Bolt Murrays Part# 56-F131 3/8" x 1-1/2" gooseneck bolt for Nacra 5.2 and all Prindles. Performance Sports factory item # F131
    PRINDLE/NACRA GOOSENECK BOLT
    NACRA
    Go-Joe 2.0 Board Float Murrays Part# 54-9700 The Ocean Rodeo Go-Joe 2.0 allows kiteboarders to ride without a kiteboard leash! The unique hourglass design of the inflatable tube structure places the self-righting buoyancy at a high pivot point. This distribution of flotation will power roll your board right side up if it lands foot straps down in the water, (footstraps down create drag, slowing the board's drift).
    GO-JOE 2.0 BOARD FLOAT
    Misc
    Getaway Spreader Pole End Cap Murrays Part# 50-37500031 Hobie® factory replacement end cap for Getaway spreader pole Hobie Part# 37500031
    GETAWAY SPREADER POLE END CAP
    Hobie
    Getaway Batten Set Murrays Part# 50-37016001 Hobie® factory replacement batten set for the Hobie Getaway. Hobie Part# 37016001
    GETAWAY BATTEN SET OEM
    Hobie
    Gath Altimeter Bracket Kit Murrays Part# 52-0070
    GATH ALTIMETER BRACKET KIT
    Gath
    Dakine Garb Tie Down Straps Murrays Part# 32-1512 Garb Tie Downs attach to your rack and stay there. Once you adjust the buckle for the desired loop length, the Garb strap works as a modified bungee cord. Just tighten by pulling the webbing end and its elasticity holds your gear firmly in place. Easy to use, durable and treated for UV protection. Two per set.
    DAKINE GARB TIE DOWN STRAPS (PR)
    Dakine
    Recently viewed