Murrays Marine - Catamaran specialists

All Sailing Parts

3138 products

    Murrays Sports is your best one stop shop for beach catamaran parts and accessories.  We stock both OEM and aftermarket parts for Hobie Cat Catamarans, Nacra Catamarans, and Prindle Catamarans.  We also have parts for Dart, Sol-Cat, G-Cat, Sabot and O'Pen Skiff Sailboats.

    We manufacture many OEM parts for these boats and have a full rigging shop onsite.  We make most of our rigging orders and ship within 24 hours of being ordered.

    Murrays has kits to make your life easier. From Rigging sets, Line Sets, Rudder locking kits, Rudder cam kits, Mast hinge kits, spare parts kits, rudder rebuild kits, cat righting kits, pins and rings kits and more.

    We manufacture many hard to find parts and source parts as needed when the OEM manufacturers discontinue items.

    Murrays has the largest selection of tiller extensions available with aluminum, fiberglass and carbon version s available in fixed length and adjustable length hiking sticks.

    We make 3 generations of Hobie 16 rigging and can help you get what you need for your boat.

    Custom rigging - Murrays can handle custom rigging requests from 3/32, 5/32 and 1/8" wire.  We use top quality 316 stainless wire for the best longevity.  We use professional grade tools and have experienced craftsmen with years of experience handling the rigging.

    Email us lengths, wire type and end pieces for a custom rigging quote.  Send quote requests to info(at)murrays.com.  Use the @ symbol in our email address instead of (at).  If we post the address we get even more spam.

    We offer expert parts advice and can help with any size project from restoring a classic boat to maintaining a fleet of boats.

    We carry a full line of parts from Hobie, Harken, Nacra, Ronstan, Robline, Alpha Rope, Pelican Rope, and Rooster.

    Navigating Murrays.com: The 2 best ways to find the parts you need are to use the Search and the Shop By Boat section.

    The Search is at the top of the page and is for searching key words like Fairlead, 40mm block, cheek block, clew block, downhaul, Nacra Bridle etc. 

    The Shop By Boat section can be found in the dropdown menu. Click on the Pars by Boat menue header and then select your boat under the manufacturer.  Once on your boat you can shop by category: Mast Parts, Rigging, Boom Parts, Front Crossbar Parts, Rudder Parts, Upgrades and Accessories.

    We have hyperlinked Illustrated parts lists for the Hobie 16 and the Hobie Wave on their shop by boat pages.

     

     

    3138 products
    Bow Spreader Pole Wave
Murrays Part# 50-38999021
Hobie® factory replacement bow spreader pole only for Wave.
Hobie Part# 38999021
    WAVE BOW SPREADER POLE
    Hobie
    $148.99
    Bow Eye Screw

56-1805

Factory stainless steel bow eye screw for Inter 18
    NACRA BOW EYE SCREW
    NACRA
    $9.00
    Out of Stock
    Boomlet HC17 SE to Sport Conversion
Murrays part# 50-52722011
Make it much easier to move from one side of a Hobie® 17 to the other while tacking or jibing by removing the boom. Easily convert 1995 and newer Hobie® 17 SE race boats by adding the Hobie factory Boomlet.
Hobie part# 52722011
    H-17SE TO SPORT BOOMLET CONVERSION
    Hobie
    $271.00
    Boom Outhaul Car

Murrays Part# 56-7907




Internal boom outhaul car for all Prindles, Nacra 5.2 and Inters.

Nacra Sailing factory item# 30206
    PRINDLE/NACRA/INTER BOOM OUTHAUL CAR
    NACRA
    $23.50
    Out of Stock
    Boom End Cap H18 Aft
Murrays Part# 50-60760011
Hobie® factory replacement aft end cap for Hobie 18 boom.
Hobie part# 60760011
    H-18 AFT BOOM END CAP
    Hobie
    $60.99
    Out of Stock
    Boom End Cap H20 Forward
Murrays Part# 50-40741021
Hobie® factory replacement end cap for forward end of Hobie 20 boom.
Hobie part# 40741021
    H-20 FORWARD BOOM END CAP
    Hobie
    $29.59
    H17 Boom End Cap

Murrays Part# 50-50513011

Hobie® factory replacement aft end cap for Hobie 17.
    H-17 BOOM END CAP
    Hobie
    $36.99
    Out of Stock
    Boom End Cap H17 Forward
Murrays Part# 50-50512001
Hobie® factory replacement forward end cap for Hobie 17 boom.
    H-17 FORWARD BOOM END CAP
    Hobie
    $68.99
    Out of Stock
    H-20 BOOM ASSEMBLY
    Hobie
    $470.00
    Out of Stock
    Boom Assembly H16 Black
Murrays Part# 50-20720011
Black boom assembly for Hobie® 16 includes end caps, block hanger, and barrel cleat. Order gooseneck assembly separately. This boom is normally a special order item.
Hobie Part# 20720011
    H-16 BOOM ASSEMBLY-BLACK
    Hobie
    $642.99
    Boom Assembly H17 Black
Murrays Part# 50-50510000
Hobie® factory replacement black boom assembly for Hobie® 17. 
Hobie part# 50510000
    H-17 BOOM ASSEMBLY-BLACK
    Hobie
    $650.00
    Book: Freestyle Windsurfing

Murrays Part# 45-0181

Includes explanations and hints, along with hundreds of photographs, demonstrating moves suitable for beginners as well as advanced freestylers. The 128-page paperback book by Roger Jones has a copyright date of 1983. Limited to stock on hand.
    BOOK: FREESTYLE WINDSRFING
    Misc
    $10.95
    BONEZ BOARD STACKERS (PAIR)
    Murrays Sports
    $39.95
    Bolt Rudder Hold Down

Murrays Part# 19-3011



​Rudder hold down bolt for Inters is Nacra Sailing factory Part# 30357
    NACRA BOLT RUDDER HOLD DOWN
    NACRA
    $1.50
    Rear Crossbar Bolt 3/8-16X4.5 Hex Head

Murrays Part# 56-F181


Rear crossbar bolt for Inters, Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS.

Performance Sports factory item# F181
    NACRA REAR CROSSBAR BOLT 3/8-16X4.5"
    NACRA
    $6.75
    Out of Stock
    Inter Bolt Front Beam 3/8-16X4.5"

Murrays Part# 56-F180


Socket head 3/8 x 4-1/2" front beam bolt for all Inters

Compatible Boats:  Nacra 460, Nacra 500, Nacra 570, Nacra 16, NACRA 17, Nacra F18 Infusion, Nacra F20 Carbon, Nacra F20 Carbon FCS.

Performance part# F180
    NACRA BOLT FRONT BEAM 3/8-16X4.5"
    NACRA
    $17.25
    BOLT #10 X .50"
    Hobie
    $1.20
    Front Beam Strap

Murrays Part# 56-3512



Front beam strap for Nacra 6.0

Nacra Sailing factory item# 30096
    NACRA 6.0 FRONT BEAM STRAP
    NACRA
    $18.00
    BBTalkin' Multi Connector Set

Murrays Part# 52-2521

This connector is designed with our secure waterproof seal that screws into your BBTalkin' Unit. The end of this connector is a female 3.5mm jack. You can plug any male 3.5mm jack into this multi-connector. If you do not wish to use a BBTalkin' headset with your units, you can plug any earbud with microphone set up that has a 3.5mm male jack into this connector.
    BBTALKIN' MULTI CONNECTOR SET
    BBTalkin'
    $13.20
    BATTEN CAP RBS 10 X 7mm
    RBS
    $0.70
    BATTEN CAP RBS 10 X 8mm
    RBS
    $0.70
    Out of Stock
    Getaway Wing End Cap-Front Right, Rear Left

Murrays Part# 50-37660041

Replacement end cap for Hobie Getaway wing assembly.
    GETAWAY WING END CAP-FRONT RIGHT, REAR LEFT
    Hobie
    $109.00
    Out of Stock
    Back Up Casting H18 Bow Tang
Murrays Part# 50-61120001
Hobie® factory replacement back up casting for Hobie® 18 bow tang.
    H-18 BACK UP CASTING BOW TANG
    Hobie
    $50.99
    Wave Assembly Manual

Murrays Part# 50-38450000

Hobie® factory assembly manual for the Wave catamaran.

The manual is also available for free download at the Hobie Cat® Web site.
    WAVE ASSEMBLY MANUAL
    Hobie
    $6.39
    Aquapac Small VHF Pro 229

Murrays Part# 49-2229
    AQUAPAC SMALL VHF PRO 229
    Aquapac
    $65.00
    Aquapac Small VHF Case 228

Murrays Part# 49-2228
    AQUAPAC SMALL VHF CASE 228
    Aquapac
    $40.00
    The Aquapac Small Armband case with super-strong armbands fits phones, walkie-talkies and GPS units. Carry your electronics on your arm, leaving you free to kite-surf, raft or engage in any other activity in which you want to immerse yourself. This case works best with small phones and micro-radios. This case fits all the same devices as the Mini Whanganui (49-2108), with a maximum device size is 5" tall with a circumference of 6".
    AQUAPAC SMALL ARM CASE 216
    Aquapac
    $45.00
    AQUAPAC LARGE VHF CLASSIC 248

Murrays Part# 49-2248
    AQUAPAC LARGE VHF CLASSIC 248
    Aquapac
    $40.00
    Aquapac Belt Case 828

Murrays Part# 49-2828

With Aquapac's ultimate compact camera case, it's no problem to go canyoning with your camera. Capture waterfalls from underneath and dive into pools without worry.
    AQUAPAC BELT CASE 828
    Aquapac
    $38.00
    AIRUSH KNOTLESS BALL (6)
    Airush
    $6.00
    New-Style 1003 Doubler Plate
Murrays Part# 56-1013
New-style doubler plate for Inter #56-1003
Performance Sports factory item #1013
    NACRA NEW STYLE 1003 DOUBLER PLATE
    NACRA
    $9.20
    Out of Stock
    SNUFFER BAG END POLE 11'
    Murrays Sports
    $189.00
    WIRE STUD LEFT 5/32" (SS)
    Misc
    $22.00
    WIRE STUD 5/32 X 5/16-24 RH
    Misc
    $24.00
    Wire 5/32" 7X19 Bras 304 Stainless Steel
304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards.


Features
304 Stainless Steel
Flexible and Low Stretch
Highly Polished for Marine Use

7 groups of 19 strands
Sold by the foot
    WIRE 5/32" 7X19 BARE 304 SS
    Misc
    $3.00
    WIRE 3/32" 7X7 BARE 304 SS
    Misc
    $0.95
    Wire 3/32" 7X19 Bare 316 Stainless Steel 
316 stainless steel cable is the gold standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards.


Features
316 Stainless Steel
Flexible and Low Stretch
Highly Polished for Marine Use

7 groups of 19 strands
Sold by the foot
    WIRE 3/32" 7X19 BARE 316 STAINLESS
    Murrays Sports
    $2.65
    Wire 1/16" 7X7 Bare 304 Stainless Steel
Murrays Part# 002-0022
304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x7 cable is flexible and ideal for Hobie, Nacra and Prindle halyards.
    WIRE 1/16" 7X7 BARE 304 SS
    Murrays Sports
    $0.65
    Wire 1/8" 7X19 Bare 304 Stainless Steel
304 stainless steel cable is the industry standard for marine rigging applications due to its high strength and corrosion resistance. 7x19 cable is flexible and ideal for Hobie, Nacra and Prindle halyards.


Features
304 Stainless Steel
Flexible and Low Stretch
Highly Polished for Marine Use

7 groups of 19 strands
Sold by the foot
    WIRE 1/8" 7X19 BARE 304 SS
    Misc
    $2.10
    Flat Washer #10 (.188"x.5") Stainless Steel
Murrays Part# 19-4014
    FLAT WASHER SS #10 (.188"x.5")
    Misc
    $0.40
    Recently viewed