Murrays Marine - Catamaran specialists

All

3171 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3171 products
    Out of Stock
    PRINDLE END CAP (SLOTTED) TILLER ARM
    Murrays Sports
    Out of Stock
    PRINDLE 15/16/18 RUDDER BLADE
    Misc
    Gooseneck Base Fitting Murrays Part# 56-7807 The Prindle Gooseneck base fitting attaches to mast of Prindle 15, 16, 18, 18-2 and 19. Nacra Sailing factory item# 30202
    PRINDLE GOOSNECK BASE FITTING
    NACRA
    Diamond Tang 3-Hole Bottom Murrays Part# 56-6813 The Prindle Diamond Tang 3-Hole (Bottom) is a 3-hole lower tang for diamond wire is for Prindle 18, 18-2 and 19. Performance Sailing factory item #6813; Nacra Sailing #31444.
    PRINDLE DIAMOND TANG 3-HOLE BOTTOM
    NACRA
    Bolt Plate Murrays Part# 56-2008 Bolt plate for dolphin striker fits Prindle 15, 16, 18, Escape, 18-2, 19, 19MX. Nacra Sailing factory item #30043
    PRINDLE/ESCAPE BOLT PLATE
    NACRA
    Mast Head Casting Murrays Part# 56-6902 Mast head casting for Prindle 18-2 and 19. Nacra Sailing factory item# 30459
    PRINDLE MAST HEAD CASTING
    NACRA
    Prindle 18 Mast Head Casting Murrays Part# 56-6802 Mast head casting for Prindle 18 only. Order pin and split ring separately. Nacra Sailing factory item# 30452
    PRINDLE 18 MAST HEAD CASTING
    NACRA
    Mast Head Casting Murrays Part# 56-6502 Factory replacement mast head casting for Prindle 15 Catamaran
    PRINDLE MAST HEAD CASTING
    NACRA
    Pintle Bolt Inter Murrays Part# 56-F161 Pintle bolt for all Nacra Inter Performance Sports factory item #F161.
    NACRA PINTLE BOLT
    NACRA
    Out of Stock
    H20 3/16 Jib Swivel Pin Murrays Part# 50-41890001 Hobie® factory replacement pin swivel for Hobie® 20 jib.
    H-20 3/16" JIB SWIVEL PIN
    Hobie
    Out of Stock
    OUTHAUL BEARING PIN
    Hobie
    Out of Stock
    NYLINER 3/8"
    Hobie
    Nut Nylock Lo-Pro 1/4-20 Murrays Part# 50-8050101 Hobie® factory replacement low profile 1/4-20 nylock nut. Used on Hobie 14 and 16 gooseneck assembly. Hobie Part# 8050101
    NUT NYLOCK LOW PROFILE 1/4-20"
    Hobie
    H21 Nut Jam Murrays Part# 50-8050151 Hobie® factory replacement 5/8"-18 jam nut for Hobie® 21. Hobie Part# 8050151
    H-21 NUT JAM
    Hobie
    Nut Jam 9/16-18 Low Profile Murrays Part# 50-8050461 Hobie® factory replacement low-profile 9/16-18 jam nut is used on Hobie 17 dolphin striker. Hobie Part# 8050461
    NUT JAM 9/16-18" LOW PROFILE
    Hobie
    Nut 12-24 Nylock Hex Murrays Part# 50-8050421 Hobie® factory replacement 12-24 nylock hex nut is used on Hobie 20 Miracle rudder gudgeon. Hobie Part# 8050421
    NUT 12-24 NYLOCK HEX
    Hobie
    NSI RATCHET FOOTSTRAP-BLACK (PR)
    NSI
    Out of Stock
    NACRA RUDDER BASE CASTING
    NACRA
    Out of Stock
    NACRA RUDDER HEAD ROLLER
    NACRA
    Out of Stock
    RUDDER HEAD (all Inters)
    Murrays Sports
    Nacra Rudder Adjustment Eye Nut Murrays Part# 56-F187 This is the lock nut for the adjustment eye on the top of the rudder castings. Infusions MKiii rudder castings stopped using these eyes. Boats sold/ purchased after the release of the F18inf MKiii likely don't have that eye, and so this lock nut is not appropriate. Rudder adjustment eye nut for all Inters is Nacra Sailing factory item #30363. Fits Nacra 460, 500, 570,16,17, F18 Infusion and F20 Carbon
    NACRA RUDDER ADJUSTMENT EYE NUT
    NACRA
    Mast Head Casting With Wire Halyard Murrays Part# 56-6552 Performance Sports factory Nacra mast head casting for early Nacras that had wire main halyards.
    NACRA MAST HEAD CASTING WITH WIRE HALYARD
    NACRA
    NACRA F16/18INF TILLER TIE BAR ASSEMBLY
    NACRA
    Nacra Gudgeon Slotted 6.0NA F18 Murrays Part# 56-1005 Nacra 6.0NA slotted gudgeon is Performance Sports factory item# 1005
    NACRA SLOTTED GUDGEON
    NACRA
    Nacra Crossbar Bolt Chip Murrays Part# 56-2510 The Nacra Crossbar Bolt Chip is for beam mounting on Prindles and Nacras. Nacra Sailing factory item# 30069 Prindle item# 2510
    NACRA CROSSBAR BOLT CHIP
    NACRA
    NACRA 6.0 TILLER ARM WITH ANGLE 34.5"
    NACRA
    NACRA 5.0/5.7 TILLER ARM WITH ANGLE 28"
    NACRA
    Mirazyme Odor Eliminator 2 oz Murrays Part# 38-1904 Great for cleaning odors out of wetsuits.
    MIRAZYME ODER ELIMINATOR
    Gear Aid
    Out of Stock
    WAVE AFT MAST SUPPORT
    Murrays Sports
    Out of Stock
    H18 Mast Step Kit Murrays Part# 50-60180011 Hobie® factory replacement mast step kit for Hobie® 18 includes mast step casting, post, bearing, screw and washer. This is an upgrade for older Hobie 18's with threaded post.
    H-18 MAST STEP KIT
    Hobie
    Out of Stock
    H14/Wave Mast Step Murrays Part# 50-10170011 Mast step for Hobie 14 (without threaded post) and Wave (96 and older). Hobie® factory replacement part. If you have a H14 with threaded post order #50-20200011 (see below). Requires four 6-6 rivets (item #19-5032).
    H-14/WAVE MAST STEP
    Hobie
    P18/18.2/19 Mast Hound Murrays Part# 56-6806 Mast Hound for P18, 18-2 and P19 Prindle Part# 6806
    PRINDLE 18/18.2/19 MAST HOUND
    NACRA
    Out of Stock
    GETAWAY LOWER MAST
    Hobie
    Out of Stock
    H17/18 Mast Foam Plug Murrays Part# 50-60060000 Hobie® factory replacement foam plug for Hobie® 17 or 18 mast.
    H-17/18 MAST FOAM PLUG
    Hobie
    Prindle 18 Mast Base Casting Murrays Part# 56-6805 Black anodized mast base casting fits Prindle 18 only. Nacra Sailing factory item# 30453
    PRINDLE 18 MAST BASE CASTING
    NACRA
    Out of Stock
    MAST BALL TIGER / FOX 50-F21062673 Hobie® factory replacement mast ball for Tiger and Fox. Ball measures 1-1/2" diameter with a 5/8"-13 threaded hole.
    TIGER/FOX MAST BALL
    Hobie
    Out of Stock
    H-20 MAST ASSEMBLY
    Hobie
    Out of Stock
    hobie-18-mast-60610010
    H-18 MAST ASSEMBLY
    Hobie
    Marine Tex White 2oz Murrays Part# 40-1338 Marine Tex is a heavy-duty structural epoxy that simplifies the most difficult repairs. This easy-to-use white putty can be molded to any shape and will bond to wood, steel, aluminum, fiberglass and most plastics. It sands smooth as glass and can be drilled, threaded and painted. 2 oz.
    MARINE TEX WHITE
    Misc
    Main Traveler Track (Deep) Murrays Part# 50-50252021 This Hobie® factory replacement deep traveler track for Hobie® 17 can also be cut to fit Hobie 14 or 16. Use 18 #19-5024 6-6 countersunk rivets for installation on Hobie 17.
    MAIN TRAVELER TRACK (DEEP)
    Hobie
    Recently viewed