Murrays Marine - Catamaran specialists

All

3135 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3135 products
    Out of Stock
    H14 Roller Furling Jib Sail (White) Murrays Part# 50-10992511 Hobie® factory replacement white roller furling jib sail for Hobie® 14.
    H-14 ROLLER FURLING JIB SAIL (WHITE)
    Hobie
    Out of Stock
    Getaway Mainsail (White) Murrays Part# 30-6005
    H-17 SPORT JIB SAIL (WHITE)
    Murrays Sports
    Out of Stock
    H20 Rudder Pin Murrays Part# 50-40880011 5/16" x 9-1/4" end-to-end, with 3/32" hole at each end. Cotter pins sold separately (#19-1015 3/32" x 3/4" each). *****If your Hobie 20 has one piece rudder gudgeons, like H18, these pins will not fit.******
    H-20 RUDDER PIN (EACH)
    Hobie
    Nacra Rudder Pivot Bolt 1/4-20" Murrays Part# 56-F191 Countersunk rudder pivot bolt measures 1/4-20 x 1-7/8"
    NACRA RUDDER PIVOT BOLT 1/4-20"
    NACRA
    Out of Stock
    H17/18/20 Upper Rudder Casting Murrays Part# 50-50321001 Hobie® factory replacement upper left rudder casting for Hobie® 17, 18, 20 or Wave. Use four 6-8 rivets (#19-5033) for installation.
    H-17/18/20 UPPER RUDDER CASTING
    Hobie
    Out of Stock
    Tiger Rudder 2007 Murrays Part# 50-F99502280 This is the only Tiger rudder blade available from Hobie Cat®. The factory upgrade carbon rudder is slightly lighter and stiffer than Hobie's standard Tiger rudder that is no longer available. New boats come with the carbon blades and new gudgeons. New gudgeons (#50-F18056012 upper; #50-F18056014 lower) must be purchased for older boats in order to accommodate the new blades.
    TIGER RUDDER 2007
    Hobie
    Out of Stock
    F18 Infusion Rudder Blade Murrays Part# 56-4598 Replacement new-style rudder blade for Nacra F18 Infusion and F20C, Inter 18 or 20 cats. Superior strength and consistent quality. Replaces Nacra Sailing factory item #30131. Technically, this is the same rudder blade as for Nacra 17, but without the sticker.
    NACRA F18 INFUSION RUDDER BLADE
    NACRA
    Out of Stock
    NACRA F18 INFUSION/N20 OLD STYLE RUDDER BLADE
    NACRA
    Out of Stock
    NACRA 5.2/5.5/5.8/6.0/18SQ RUDDER BLADE
    NACRA
    Out of Stock
    NACRA 570/590/F17 RUDDER BLADE
    NACRA
    Out of Stock
    H-17 SUPER ROLLER FURLING JIB RIG KIT
    Murrays Sports
    Robline Super Downhaul Line 3.8mm Murrays Part# 39-1309 FSE Robline's Super Downhaul line is specifically designed to handle the extreme high loads of large formula sailboard race sails. The Super Downhaul line's unique construction keeps the rope round under extreme downhaul loads, which allows it to hold extremely well in clam-style cleat bases. Smooth 12-plait construction and the slippery characteristics of 100% SK75 Dyneema fiber dramatically reduce friction in downhaul purchase systems.
    SUPER DOWNHAUL LINE 3.8mm
    Robline
    Revivex Breathable Fabric Guard Murrays Part# 40-6536 Spray-on water repellent for outerwear of all types of fabrics, including GORE-TEX®, Windstopper®, and all types of breathable laminates and synthetic fabrics. For all-season comfort, just machine wash, spray ReviveX®, then tumble dry (dryer-safe fabrics only!). Long-lasting ReviveX® is water-based, non-toxic and non-flammable. The 10 fl. oz. trigger spray bottle treats 2-4 garments.
    REVIVEX BREATHABLE FABRIC GUARD
    Misc
    Out of Stock
    RIG TENSION GAUGE DELUXE-METRIC
    Misc
    Out of Stock
    PRINDLE TILLER TUBE REPLACEMENT
    Murrays Sports
    Rear Inboard Support Casting Kit Murrays Part# 50-61040001 Hobie® factory rear inboard support casting kit. Requires one per side. Hobie Part# 61040001
    REAR INBOARD SUPPORT CASTING KIT
    Hobie
    Book: Dave Perry 100 Best Racing Rules Quizzes Murrays Part# 45-0104 Dave Perry 100 Best Racing Rules Quizzes highlights specific aspects of the racing rules in an enjoyable format designed to help you become much more familiar with The Racing Rules of Sailing. Increase your knowledge of the rules and your racing will improve dramatically as you gain greater confidence making tactical decisions and maneuvering in close quarters. Based on The Racing Rules of Sailing for 2017-2020, the fifth edition
    BOOK: DAVE PERRY 100 BEST RACING RULES QUIZZES
    Misc
    Torqeedo V9/P790 Travel Propeller Murrays Part# 71-1917 Spare propeller for Torqeedo 1003 electric motor is an 11.5" x 8.1" variable-pitch-variable-camber (VPVC) propeller developed especially for the torque characteristic and performance range of Torqeedo-motors. Made of impact-resistant glass-fiber reinforced PBT (polybutylene terephthalate), the two-blade prop comes complete with washers, nut and shear pin. For model Travel 503/1003. Ø 292 mm.
    TORQEEDO V9/P790 TRAVEL PROPELLER
    Torqeedo
    West Systems Universal Epoxy Pumps Murrays Part# 40-4104 These pumps screw onto West System epoxy resin and hardener to make dispensing and 5:1 metering easy and automatic. Made of durable polypropylene, the pumps give years of dependable service. Read and follow the priming, ratio verification and operating instructions that come with the pumps
    WEST SYSTEMS UNIVERSAL EPOXY PUMPS
    West Marine
    Out of Stock
    PRINDLE END CAP (SLOTTED) TILLER ARM
    Murrays Sports
    Out of Stock
    PRINDLE 15/16/18 RUDDER BLADE
    Misc
    Gooseneck Base Fitting Murrays Part# 56-7807 The Prindle Gooseneck base fitting attaches to mast of Prindle 15, 16, 18, 18-2 and 19. Nacra Sailing factory item# 30202
    PRINDLE GOOSNECK BASE FITTING
    NACRA
    Diamond Tang 3-Hole Bottom Murrays Part# 56-6813 The Prindle Diamond Tang 3-Hole (Bottom) is a 3-hole lower tang for diamond wire is for Prindle 18, 18-2 and 19. Performance Sailing factory item #6813; Nacra Sailing #31444.
    PRINDLE DIAMOND TANG 3-HOLE BOTTOM
    NACRA
    Bolt Plate Murrays Part# 56-2008 Bolt plate for dolphin striker fits Prindle 15, 16, 18, Escape, 18-2, 19, 19MX. Nacra Sailing factory item #30043
    PRINDLE/ESCAPE BOLT PLATE
    NACRA
    Mast Head Casting Murrays Part# 56-6902 Mast head casting for Prindle 18-2 and 19. Nacra Sailing factory item# 30459
    PRINDLE MAST HEAD CASTING
    NACRA
    Prindle 18 Mast Head Casting Murrays Part# 56-6802 Mast head casting for Prindle 18 only. Order pin and split ring separately. Nacra Sailing factory item# 30452
    PRINDLE 18 MAST HEAD CASTING
    NACRA
    Mast Head Casting Murrays Part# 56-6502 Factory replacement mast head casting for Prindle 15 Catamaran
    PRINDLE MAST HEAD CASTING
    NACRA
    Pintle Bolt Inter Murrays Part# 56-F161 Pintle bolt for all Nacra Inter Performance Sports factory item #F161.
    NACRA PINTLE BOLT
    NACRA
    Out of Stock
    H20 3/16 Jib Swivel Pin Murrays Part# 50-41890001 Hobie® factory replacement pin swivel for Hobie® 20 jib.
    H-20 3/16" JIB SWIVEL PIN
    Hobie
    Out of Stock
    OUTHAUL BEARING PIN
    Hobie
    Out of Stock
    NYLINER 3/8"
    Hobie
    Nut Nylock Lo-Pro 1/4-20 Murrays Part# 50-8050101 Hobie® factory replacement low profile 1/4-20 nylock nut. Used on Hobie 14 and 16 gooseneck assembly. Hobie Part# 8050101
    NUT NYLOCK LOW PROFILE 1/4-20"
    Hobie
    H21 Nut Jam Murrays Part# 50-8050151 Hobie® factory replacement 5/8"-18 jam nut for Hobie® 21. Hobie Part# 8050151
    H-21 NUT JAM
    Hobie
    Nut Jam 9/16-18 Low Profile Murrays Part# 50-8050461 Hobie® factory replacement low-profile 9/16-18 jam nut is used on Hobie 17 dolphin striker. Hobie Part# 8050461
    NUT JAM 9/16-18" LOW PROFILE
    Hobie
    Nut 12-24 Nylock Hex Murrays Part# 50-8050421 Hobie® factory replacement 12-24 nylock hex nut is used on Hobie 20 Miracle rudder gudgeon. Hobie Part# 8050421
    NUT 12-24 NYLOCK HEX
    Hobie
    NSI RATCHET FOOTSTRAP-BLACK (PR)
    NSI
    Out of Stock
    NACRA RUDDER BASE CASTING
    NACRA
    Out of Stock
    NACRA RUDDER HEAD ROLLER
    NACRA
    Out of Stock
    RUDDER HEAD (all Inters)
    Murrays Sports
    Nacra Rudder Adjustment Eye Nut Murrays Part# 56-F187 This is the lock nut for the adjustment eye on the top of the rudder castings. Infusions MKiii rudder castings stopped using these eyes. Boats sold/ purchased after the release of the F18inf MKiii likely don't have that eye, and so this lock nut is not appropriate. Rudder adjustment eye nut for all Inters is Nacra Sailing factory item #30363. Fits Nacra 460, 500, 570,16,17, F18 Infusion and F20 Carbon
    NACRA RUDDER ADJUSTMENT EYE NUT
    NACRA
    Recently viewed