Murrays Marine - Catamaran specialists

All

3148 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3148 products
    Out of Stock
    OPTI TAPERED MAINSHEET BLUE/SILVER
    Robline
    O'Pen Skiff Tiller Extension 70cm Murrays Part# 65-31695 Stick of 70 cm for the O'pen Skiff. Non-slip coating. Tahe Part# 31695
    O'PEN SKIFF TILLER EXTENTION 70CM
    Tahe Outdoors
    O'Pen Skiff Drain Plug Housing Murrays Part# 65-53264 Drain plug support Tahe Part# 53264
    O'PEN SKIFF DRAIN PLUG HOUSING
    Tahe Outdoors
    M8 NYLOCK NUT
    Murrays Sports
    N15 Logo Stern Sicker Murrays Part# 56-40150 Nacra 15 logo sticker for stern. Size: 350 x 53 mm Clean the surface before attachment.
    NACRA 15 LOGO STERN STICKER
    NACRA
    Out of Stock
    Nacra Jib Car Front Beam Murrays Part# 56-30332 Jib car that can be positioned on the front cross bar
    NACRA JIB CAR FRONT BEAM
    NACRA
    Nacra Mainsail Swivel Halyard Hook Murrays Part# 56-31741 Main halyard hook swivel to be used for the Nacra 15, F16 MKII and Nacra 17.
    NACRA MAINSAIL SWIVEL HALYARD HOOK
    NACRA
    NF18 Shroud 5/32" Black Wire Murrays Part# 002-5605-12
    N-F18 SHROUD 5/32" BLACK WIRE
    Murrays Sports
    NACRA BUSHING FAIRLEAD 5MM
    NACRA
    M8 x 35mm TORX COUNTERSUNK BOLT
    NACRA
    TIGER TRAMPOLINE WITH CURVED SIDES-BLACK
    Murrays Sports
    H20/21 Super Cruiser Compression Sleeve Murays Part# 50-31110001 This is the sleeve that goes over the dolphin striker inside the front crossbar of the H20. Hobie part# 31110001
    H20/21SC COMPRESSION SLEEVE
    Murrays Sports
    Hobie Main Traveler Track Access Plate Kit Murrays Part# 50-11810011 This kit has been discontinued by Hobie, but the plates are still available, so Murrays is producing the kits with the Hobie plates.
    HOBIE MAIN TRAVELER TRACK ACCESS PLATE KIT
    Hobie
    Out of Stock
    H20 Forward Outboard Sup Tube Murrays Part# 50-41150001
    H-20 FORWARD OUTBOARD SUP TUBE
    Hobie
    Out of Stock
    H-18SX WING STRUT
    Hobie
    H16 Kissme Jib Sheet & Traveler Upgrade Murrays Part 001-3150 This is a great way to upgrade your vintage Hobie 16 jib sheeting system. This kit includes upgraded traveler cars with carbo blocks for smooth function, and lance cleats to facilitate smooth and accurate jib traveler position control. *The difference between this kit and the deluxe is the Lance Cleats vs the Cam Cleats. Lance cleats release to the side and were stock on many early model Hobies while the cam cleats release
    H-16 KISSME JIB SHEET & TRAVELER UPGRADE
    Murrays Sports
    Out of Stock
    NACRA GOOSENECK BASE DS MAINSAIL
    NACRA
    Out of Stock
    NACRA 5.7 FRONT CROSSBAR COMPLETE-USED
    NACRA
    Out of Stock
    Bolt 5/16-18 x 2-3/4" HX HD Murrays Part# 50-8040391 EZ Loc upper rudder bolt for Hobie Bravo, Getaway and Wave  Hobie Part# 8040391
    BOLT 5/16-18 x 2-3/4" HX HD
    Hobie
    Nacra U-Bracket Bolt Murrays Part#  56-31464 Bolt pan head 1/4 x 1/2" UNC for boom U-bracket. Bolt is also used for Wingseat frame connection
    NACRA U-BRACKET BOLT
    NACRA
    Harken 29mm Fly Block Murrays Part# 28-2171 These blocks are the standard upgrade for F18 and other Spinnaker Beachcats that have suffered from halyard block failure.  The 29mm Fly Block Single- Harken soft-attach Fly blocks are designed to provide strength without mass, providing sailors with big power in a low-aero package. Designed specifically for high-tech line, these efficient blocks have an incredible working load for their small size.
    HARKEN 29MM FLY BLOCK
    Harken
    #13#Cam Plate 3in Stainless Steel TRPL Murrays Part# 28-HCP130 This is the cam plate for a harken block assembly to mount your cam cleat on a triple block.
    HARKEN #13 CAM PLATE 3" SS TRPL
    Harken
    Nacra Shroud Eye Murrays Part# 56-32338 Details: 7/16UNC 17-4 SS Replacement shroud eye for Nacra beachcats.
    NACRA SHROUD EYE
    NACRA
    N-15 DIAMOND WIRE
    Murrays Sports
    Nacra Compression Pole Base Murrays Part# 56-31236 The base on the bowsprit for the compression pole.
    NACRA COMPRESSION POLE BASE
    NACRA
    Nacra Rudder Casting Lower Eye Screw Wide Murrays Part# 56-31706 Rudder casting lower eye screw wide
    NACRA RUDDER CASTING LOWER EYE SCREW WIDE
    NACRA
    NACRA CONNECTIONPART TILLER/JOYSTICK FLEX
    NACRA
    Nacra PVC Ball Carbon Tiller Extension Murrays Part# 56-32460
    NACRA PVC BALL CARBON TILLER EXTENSION
    NACRA
    NACRA DOLPHIN STRIKER ROD
    NACRA
    Harken 56mm Padeye - 2 Fasteners Murrays Part# 28-2759 This is an upgrade for your harken main traveler car. It is being used on the NACRA 17 Olympic boats to replace the failing eyestrap. It will typically require longer bolts/ screws. This is a heavy duty cast stainless steel padeye. Fits on Harken Car 2738 and 2756 Harken Part# 2759
    HARKEN 56MM PADEYE - 2 FASTENERS
    Harken
    NACRA 17 MKI TRAMPOLINE OEM
    NACRA
    Inter Front Crossbar Endcap Casting-Left Murrays Part# 56-2526 Nacra Inter Front Crossbar Endcap Casting-Left Fits all Inters, Inter 18 Inter 20
    NACRA FRONT CROSSBAR CASTING END CAP-LEFT
    NACRA
    H-18SX/21 WING END CASTING
    Hobie
    West System Small Repair Kit Murrays Part# 40-4101 This West System Handy Repair Pack contains everything you need to complete small repairs around the boat, shop or home, and is perfect for ding repairs. The kit contains two West System 105 Resin/205 Hardener packets, and enough high-density filler to complete a variety of coating and bonding operations.
    WEST SYSTEM SMALL REPAIR KIT
    West Marine
    West System Epoxy Resin 1 Quart Murrays Part# 40-4103-1 West System 105 Epoxy Resin is the key component in a wide variety of boatbuilding, restoration, and repair projects. It is the base material of the West System family of products on which all of the West System compounds are built.
    WEST SYSTEM 105 EPOXY RESIN 1 QUART
    West Marine
    WAVE LOWER MAST
    Hobie
    Washer Flat 1/4 x 5/8" Murrays Part# 50-8080521 Hobie® factory replacement 5/8" x 9/32" flat washer is used on Hobie 18 mast step assembly. Hobie Part# 8080521
    WASHER FLAT 1/4 X 5/8"
    Hobie
    Hobie 8080581 Hobie factory replacement 3/8" lock washer is used on Hobie 18 front and rear inboard support castings.
    WASHER LOCK 3/8"
    Hobie
    Out of Stock
    Velocitek Spare Mounting Cradle for Speed Puck Murrays Part# 49-0051-1 Velocitek's snap-in mounting cradle for the Speed Puck allows use with the ProStart mast bracket or any Tacktick Micro Compass bracket. The mounting cradle is included with new Velocitek Speed pucks and is also available separately.
    VELOCITEK SPARE MOUNTING CRADLE FOR SPEED PUCK
    Misc
    Velocitek Prostart Mounting Bracket Murrays Part# 49-0050-1 Velocitek's ProStart mounting bracket is compatible with almost all sportboat and dinghy masts that have a bolt rope track. The bracket comes packaged with a hex key, a strip-resistant stainless steel slug and all the screws, nuts and washers required to attach the ProStart to the bracket and the bracket to your mast. The design of the bracket provides space for lines to pass behind the ProStart.
    VELOCITEK PROSTART MOUNTING BRACKET
    Misc
    Recently viewed