Murrays Marine - Catamaran specialists

All

3171 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3171 products
    HOBIE 20 DOWNHAUL SHEAVE - 40700541 Hobie factory replacement downhaul sheave for Hobie® 20 mast. UV-stabilized.   SPECS: 1/2" wide by 1 5/32" diameter, 1/4' hole.
    H-20 DOWNHAUL SHEAVE
    Hobie
    H17 Sport Downhaul Hook Murrays Part# 50-52410011 Discontinued By Hobie - We recommend the Ronstan 8mm S-Hook 21-0049 to replace.  Hobie® factory replacement downhaul hook for Hobie 17 Sport is a special order item.. To replace downhaul line, order 8 feet of 1/4" prestretched line (#39-2312BK). Hobie Part# 52410011
    H-17 SPORT DOWNHAUL HOOK
    Hobie
    PRINDLE DOLPHIN STRIKER ROD 11.25"* The Performance Sports factory #C105 11.25" dolphin striker rod is for Prindle 18-2 or 19 standard length. Order #56-C106 if standard is too short. Limited to stock on hand.
    PRINDLE DOLPHIN STRIKER ROD 11.25"
    NACRA
    PRINDLE 15, 16, 18 DOLPHIN STRIKER ROD
    NACRA
    Out of Stock
    NACRA Dolphin Striker Rod - Old Style This 13" stainless steel mast support rod with 1/2" diameter has 13 threads per inch (TPI). For older Nacras with round crossbars built before 1983. Does not include nuts or washers. Performance Sports factory item #C602. Before assembly, use grease or anti-seize on threads to prevent thread galling. Limited to stock on hand.
    NACRA DOLPHIN STRIKER ROB-OLD STYLE
    NACRA
    H18 Diamond Spreader Tang Murrays Part# 50-61410000 Hobie® factory replacement diamond spreader tang for Hobie® 18.
    H-18 DIAMOND SPREADER TANG
    Hobie
    Sale
    Dakine Hook Knife with Sheath Murrays Part# 32-919981 The DaKine hook knife uses two opposing stainless steel cutting blades with an anodized aluminum handle. Includes pocket sheath that is simple to mount anywhere on your harness or spreader bar for easy access. DaKine item #4620500. Dakine's kite knife comes in a sheath with a belt loop that is easily stored on your harness or spreader bar for easy access. These are great for emergency use, and are a must for all kitesurfers to be able to cut li
    DAKINE HOOK KNIFE WITH SHEATH
    Dakine
    Save $3
    Out of Stock
    Clevis Pin 5/16 X 2.2" Upper Murrays Part# 50-8020101 Hobie® factory replacement 5/16" diameter x 2.2" clevis pin
    CLEVIS PIN 5/16 X 2.2" UPPER
    Hobie
    Clevis Pin 1/4 x 2-1/4" Murrays Part# 56-4587 1/4 x 2-1/4" clevis pin for all Inter rudder assemblies. Used to hold tiller crossbar assembly to tendon. Nacra sailing factory item# 30428
    CLEVIS PIN 1/4 x 2 1/4"
    NACRA
    Chain Plate "Turbo" Murrays Part# 50-10300000 Hobie® factory replacement chain plate for Hobie® 14 Turbo. Use three 6-4 rivets (#19-5031) for installation.
    H-14 CHAIN PLATE "TURBO"
    Hobie
    Centerboard Lock Screw 10-32X1" FHMS Murrays Part# 56-F144 #10-32 X 1" FMHS centerboard lock screw for Prindle 18.2 and 19
    PRINDLE CENTERBOARD LOCK SCREW 10-32X1" FHMS
    Misc
    Brindle Pole Tang P19MX Murrays Part# 56-1043 The bridle pole tang is part of the Prindle 19MX Conversion Kit. Performance Sports factory item #1043 is limited to stock on hand.
    PRINDLE BRIDLE POLE TANG
    NACRA
    Bridle Foil End Casting Murrays Part# 56-9662 Black end cap casting for Nacra bridle foil assembly. Nacra Sailing factory# 30302
    NACRA BRIDLE FOIL END CASTING
    NACRA
    Bow Tang Murrays Part# 56-1810 Bow tang for Prindle 15, 16, 18 and Escape Nacra Sailing factory item# 30386
    PRINDLE/ESCAPE BOW TANG
    NACRA
    H18 Boom Outhaul Car Assembly Murrays Part# 50-60220001 Hobie® factory replacement outhaul car assembly for Hobie® 18. Outhaul and shock cord are not included. For outhaul line, order 7' of 3/16" black line #39-2311BK. For outhaul shock cord, order 7' of #39-7491 black 1/4" shock cord.
    H-18 BOOM OUTHAUL CAR ASSEMBLY
    Hobie
    Out of Stock
    Boom End Cap H18 Forward Murrays part# 50-60751010 Hobie® factory replacement forward end cap for Hobie 18 boom.
    H-18 FORWARD BOOM END CAP
    Hobie
    Out of Stock
    Boom End Cap H14/16 Forward Murrays Part# 50-10740011 Hobie® factory replacement end cap for the forward end of Hobie® 14 or 16 boom. Also for Hobie® 21SC. Use three #19-5032 6-6 rivets for installation.
    H-14/16 FORWARD BOOM END CAP
    Hobie
    Front Boom End Cap Murrays Part# 56-7902 Front boom end cap for Nacra and Prindle cats. Nacra Sailing factory item# 30204
    NACRA/PRINDLE FRONT BOOM END CAP
    NACRA
    H14/16 Boom End Cap AFT Murrays Part# 50-10741031 Replacement rear boom end cap for Hobie® 14 or 16. Use two 6-6 rivets (#19-5032) for installation. Hobie® Part# 10741031
    H14/16 AFT BOOM END CAP
    Hobie
    Book: Fiberglass Boat Repair & Maintenance Murrays Part# 45-1030
    BOOK: FIBERGLASS BOAT REPAIR AND MAINTENANCE
    3M
    Out of Stock
    Bolt Socket Head 3/8-16 X 3.75" Murrays Part# 50-8040561 Hobie® factory replacement 3/8-16 x 3.75" socket head bolt. Applications: Hobie 18 inboard front crossbar
    BOLT SOC HEAD 3/8-16 X 3.75"
    Misc
    Bolt Socket Head 3/8-16 X 2.50" Murrays part# 50-8040521 Hobie® factory replacement 3/8-16 x 2.50" socket head bolt is used on Getaway wing and Hobie® 18 rear inboard support. Hobie Part# 8040521
    BOLT 3/8-16 X 2.50"
    Hobie
    Hex Bolt 3/8 X 4.25" Murrays Part# 56-F142 3/8" x 4-1/4" hex head bolt is for Prindle front crossbar Performance Sports factory item# F142
    PRINDLE HEX BOLT 3/8 X 4.25"
    NACRA
    Bolt 5/16-18 X 2" Murrays Part# 50-8040331 Replacement 5/16-18 x 2" bolt is used as a rudder bolt on Hobie® Pre-EZ Lock Rudder System. Hobie Part# 8040331
    BOLT 5/16-18 X 2"
    Misc
    Bolt 3/8-16 X 5" 50-8040061 Hobie® factory 3/8-16 x 5" bolt is used on Hobie 20 Miracle front crossbar. Hobie Part# 8040061
    BOLT 3/8-16 X 5"
    Hobie
    Bolt 3/8-16 X 2" Murrays Part# 50-8040501 Replacement stainless steel 3/8-16 x 2" bolt is used on Hobie® 18 front and rear crossbars. Hobie Part# 8040501
    BOLT 3/8-16 X 2"
    Hobie
    H18 Jib Furler Bearing (Race) Murrays Part# 50-61920000 Hobie® factory replacement bearing race for Hobie roller furler drum. Hobie Part# 61920000
    H-18 JIB FURLER BEARING (RACE)
    Hobie
    H20 Assembly Manual Murrays Part# 50-43450001 Printout of the Miracle 20 PDF. Includes tuning guide in the back.
    H-20 ASSEMBLY MANUAL
    Murrays Sports
    H17 Sport Assembly Manual Murrays Part# 50-52450011 Hobie® factory assembly manual for the Hobie 17 Sport. The manual is also available for free download at the Hobie Cat® Web site.
    H-17 SPORT ASSEMBLY MANUAL
    Murrays Sports
    H14 Assembly Manual Murrays Part# 50-13450000 Printout of the H14 assembly manual PDF.
    H-14 ASSEMBLY MANUAL
    Murrays Sports
    AQUASEAL .75oz PACKAGE WITH COTOL .5OZ
    Gear Aid
    Aquapac Large Phone Case Murrays Part# 49-2358
    AQUAPAC LARGE PHONE CASE
    Aquapac
    Out of Stock
    3M Marine Adhesive Dual Lock Rectangle Murrays Part# 49-0051-3 3M's Dual-Lock™ Adhesive Mount is five times stronger than conventional hook and loop fasteners. The industrial-strength adhesive holds backing securely in place and offers convenient, semi-permanent mounting of the Velocitek SC-1 and SpeedPuck. It is also useful for attaching other marine electronics, securing cabinets and doors below deck, and keeping loose items secure until they are needed.
    3M MARINE ADHESIVE DUAL LOCK-RECTANGLE
    3M
    #2 Swege-It Kit Murrays PN 33-0012 The #2 Swage-It Kit includes swage-it tool for 1/16", 3/32" and 1/8" oval sleeves. Made in the USA.
    #2 SWAGE-IT KIT
    Misc
    Trigger Snap Bronze 2.5" Murrays Part# 27-136800 Lightweight, die-cast, manganese bronze swiveling shackle with overall length of 2-9/16". Weighs 1.5 oz. SWL unspecified.
    TRIGGER SNAP-BRONZE 2.5"
    Misc
    N6.0 IPC BIAS CUT TRAMPOLINE-BLACK
    Murrays Sports
    H18SX/21sc WING TRAMPOLINES Murrays Hobie 18SX and 21SC Wing Trampolines. Lace on. Sold as a pair. Compare to Hobie part number 68040255 Not compatible with the Hobie 18 Magnum.
    H18SX/21sc WING TRAMPOLINES Murrays Hobie 18SX and 21SC Wing Trampolines.  Lace on.  Sold as a pair.   Compare to Hobie part number 68040255 Not compatible with the Hobie 18 Magnum.
    H18SX/21SC WING TRAMPOLINES-BLACK
    Murrays Sports
    H18 1-Piece Bias Cut Trampoline-Black Murrays Part# 30-3103-2 This one-piece, bias-cut, black mesh tramp for Hobie® 18 provides a smooth, uncomplicated deck and includes an 11"x12" pocket and adjustable hiking straps. Polypropylene mesh is the ideal material for beach cat tramps because it is light, strong and comfortable with very good UV resistance, plus it allows water to drain, so you won't be sitting in a puddle. Two-year warranty on workmanship and materials.
    H-18 1PC BIAS CUT TRAMPOLINE-BLACK
    Murrays Sports
    Tracker Sheave Spacer Murrays Part# 007-1052 The standard replacement sheave spacer for the traveler on all Hobie® 14, 16 and newer 17's. Sold Individually Hobie Cat® Part# 11860000.
    TRACKER SHEAVE SPACER (EA)
    Hobie
    Tiger Upper Forestay Roller Furling 5/32" Bare Wire Murrays Part# 002-6035-02 Upper forestay for Hobie® Tiger with roller furling setup does not include swivel.
    TIGER UPPER FORESTAY ROLLER FURLING 5/32" BARE WIRE
    Murrays Sports
    Recently viewed