Murrays Marine - Catamaran specialists

All

3148 products

    All Murrays Products: Hobie, Nacra, Prindle rigging, rudder parts, sails, trampolines, spare parts, lines and more. 

    3148 products
    Out of Stock
    TORQEEDO SPARE PROPELLER HIGH-SPEED FOR CRUISE 2.0/4.0
    Torqeedo
    Out of Stock
    TROQEEDO SKEG FOR TRAVEL MOTORS
    Torqeedo
    Out of Stock
    Torqeedo Skeg for Cruise Remote Murrays Part# 71-9234 Replacement skeg for Torqeedo Cruise Remote models is Torqeedo item #9234-00. Warranty: 2 years for non-commercial use Protects the outboard from running onto ground. Only compatible with Cruise models part no. 1209-00 to 1223-00.
    TORQEEDO SKEG FOR CRUISE REMOTE (2009-2016)
    Torqeedo
    Out of Stock
    H20 Jib Halyard Swivel Toggle Murrays Part# 50-41880001 Hobie® factory replacement jib halyard toggle for Hobie® 20 Miracle.
    H-20 JIB HALYARD SWIVEL TOGGLE
    Hobie
    Tiller Arm F18 Infusion-Starboard Murrays Part# 56-4551 Starboard side tiller arm for Nacra F18 Infusion. Nacra Sailing factory item #30120.
    NACRA F18INF TILLER ARM-STARBOARD
    NACRA
    Getaway Tiller Arm Murrays Part# 50-37321111 Hobie® factory replacement tiller arm for Getaway pre-EZ Loc system. This does not fit the EZ Loc Rudder System Hobie Part# 37321111
    GETAWAY TILLER ARM
    Hobie
    REMOVABLE STUD (8X50mm)
    Misc
    REMOVABLE STUD (8x40mm)
    Misc
    H-17 SPORT SPREADER POLE END CAST
    Hobie
    H18 Spreader Brace Murrays Part# 50-61430000 Hobie® factory replacement spreader brace for Hobie® 18.
    H-18 SPREADER BRACE
    Hobie
    Spreader Bar Forward Murrays Part# 56-9921 Forward spreader bar for Nacra 6.0NA (North American) Nacra Sailing factory item# 30330
    NACRA SPREADER BAR FORWARD
    NACRA
    Out of Stock
    H18 Spreader Arm Murrays Part# 50-61420000 Hobie® factory replacement spreader arm for Hobie® 18.
    H-18 SPREADER ARM
    Hobie
    N17 Snuffer Pole Holder Ring Murrays Part# 56-9653 Snuffer pole holder ring for Nacra 17. The three small rings are for attaching the pole stay wire and pole bridle wires. Performance Sports factory item# 9653
    NACRA 17 SNUFFER POLE HOLDER RING
    NACRA
    Snuffer Hoop Mid Pole Murrays Part# 56-9710 A snuffer funnels the spinnaker into the sock to facilitate launching and retrieval, even while sailing a triangular course. Keeps the tramp clean. This fiberglass Euro mid-pole ring attaches to spinnaker pole to guide the spinnaker in and out of the sock. 1.5"
    NACRA MID POLE SNUFFER HOOP
    NACRA
    Nacra Side Loader Murrays Part# 56-1018 Side loader holds daggerboard in place Nacra Sailing factory item #30008.
    NACRA SIDE LOADER
    NACRA
    HOBIE JIB HALYARD BLOCK SHEAVE Murrays PN 50-61260000 Hobie® factory replacement sheave for jib halyard block. Used on Hobie 16s and 18s. Hobie part number 61260000 and 61260010
    HOBIE JIB HALYARD BLOCK SHEAVE
    Hobie
    Screw ES Soc Cap 5/16-18 X 1" Murrays Part# 50-8031781 5/16"-18 x 1" soc head screw as used on Hobie® kayaks Hobie Part# 8031781
    SCREW E/S SOC 5/16-18 X 1"
    Hobie
    Screw 8-32 X 3/8" THMS Roller Furler Drum Murrays Part# 50-8030501 Hobie® factory replacement 8-32 x 3/8" screw for roller furler drum. Hobie Part# 8030501
    SCREW 8-32X3/8" THMS
    Hobie
    Nacra Rudder Pivot Bolt 1/4-20" Murrays Part# 56-F191 Countersunk rudder pivot bolt measures 1/4-20 x 1-7/8"
    NACRA RUDDER PIVOT BOLT 1/4-20"
    NACRA
    Out of Stock
    H14/16 Rudder Casting Upper Left Black Murrays Part# 50-10352011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H-14/16 UPPER LEFT RUDDER CASTING-BLACK
    Hobie
    H14/16 Rudder Cast Upper Right Black Murrays Part# 50-10362011 Hobie® factory replacement upper left rudder casting for Hobie® 14 or 16. Requires two 6-6 rivets (item #19-5032) and one 6-8 rivet (item #19-5033) to install tiller tube.
    H14/16 UPPER RIGHT RUDDER CASTING-BLACK
    Hobie
    Out of Stock
    Rudder Casting Only Left Prindle Murrays Part# 56-4001 Left rudder casting for all Prindles does not include hardware. The remaining stock of clear anodized castings have not had their tiller arm hole machined and will likely not fit without additional machining. Nacra Part# 30412
    PRINDLE LEFT RUDDER CASTING
    Misc
    Out of Stock
    H17/18/20 Lower Rudder Casting Murrays Part# 50-50322001 Hobie® factory replacement lower rudder casting for Hobie® 17, 18, 20, Getaway and Wave. This casting does not fit Hobie® 14 or 16.
    H-17/18/20 LOWER RUDDER CASTING
    Hobie
    H17/18/20 Upper Right Rudder Casting Murrays Part# 50-50341001 Hobie® factory replacement upper right rudder casting for Hobie® 17, 18 or 20. Use four 6-8 rivets (#19-5033) for installation. Hobie Part# 50341001
    H-17/18/20 UPPER RIGHT RUDDER CASTING
    Hobie
    Rudder Bolt Murrays Part# 56-F184 Upper rudder bolt for all Inters. Nacra Sailing factory item# 30362
    NACRA RUDDER BOLT
    NACRA
    Rudder Bolt Base Inter Murrays Part# 56-F188 1/4-20 x 2" FHMS rudder bolt (base) for all Nacra Inters.
    NACRA RUDDER BOLT BASE
    NACRA
    Out of Stock
    NACRA 5.0/5.7 LONG RUDDER
    NACRA
    ROPE CUTTING TOOL W/BLADE
    Misc
    Rope Cutter Replacement Blade Murrays Part# 33-199B Replacement blade for rope cutting tool (#33-199A)
    ROPE CUTTER REPLACMENT BLADE
    Misc
    H18 Roller Furler Yoke Assembly Murrays Part# 50-61980000 Hobie® factory replacement yoke assembly for roller furler. Hobie Part# 61980000
    H-18 ROLLER FURLER YOKE ASSEMBLY
    Hobie
    Robline Super Downhaul Line 3.8mm Murrays Part# 39-1309 FSE Robline's Super Downhaul line is specifically designed to handle the extreme high loads of large formula sailboard race sails. The Super Downhaul line's unique construction keeps the rope round under extreme downhaul loads, which allows it to hold extremely well in clam-style cleat bases. Smooth 12-plait construction and the slippery characteristics of 100% SK75 Dyneema fiber dramatically reduce friction in downhaul purchase systems.
    SUPER DOWNHAUL LINE 3.8mm
    Robline
    Rivet 3/16 x 5/16 Aluminum Murrays Part# 50-8010071 Hobie® factory aluminum 3/16" x 5/16" rivet. A rivet tool is required for installation.
    RIVET 3/16X 5/16 ALUMINUM
    Hobie
    Revivex Breathable Fabric Guard Murrays Part# 40-6536 Spray-on water repellent for outerwear of all types of fabrics, including GORE-TEX®, Windstopper®, and all types of breathable laminates and synthetic fabrics. For all-season comfort, just machine wash, spray ReviveX®, then tumble dry (dryer-safe fabrics only!). Long-lasting ReviveX® is water-based, non-toxic and non-flammable. The 10 fl. oz. trigger spray bottle treats 2-4 garments.
    REVIVEX BREATHABLE FABRIC GUARD
    Misc
    Out of Stock
    Rear Inboard Support Casting Kit Murrays Part# 50-61040001 Hobie® factory rear inboard support casting kit. Requires one per side. Hobie Part# 61040001
    REAR INBOARD SUPPORT CASTING KIT
    Hobie
    TORQEEDO V8/P350 TRAVEL/CRUISE PROPELLER
    Torqeedo
    Rotator Bolt Reinforcement Plate Murrays Part# 56-6821 Rotator bolt reinforcement. Performance Sports factory item# 6821
    ROTATOR BOLT REINFORCEMENT PLATE
    NACRA
    Rudder Lock Release Strap Murrays Part# 56-4010 This is one of two plates used in each rudder assembly on a Prindle beach cat. This is part of the internal assembly that moves up and down as part of the rudder pull up/down system. The Prindle Rudder Lock Release Strap is works on all Prindles. Nacra sailing factory item# 30415 Prindle Part# 4010
    PRINDLE RUDDER LOCK RELEASE STRAP
    NACRA
    Out of Stock
    Nut Nylock Lo-Pro 1/4-20 Murrays Part# 50-8050101 Hobie® factory replacement low profile 1/4-20 nylock nut. Used on Hobie 14 and 16 gooseneck assembly. Hobie Part# 8050101
    NUT NYLOCK LOW PROFILE 1/4-20"
    Hobie
    Out of Stock
    Nut Nylock 3/8-24 Murrays Part# 50-8050511 Replacement 3/8-24 nylock nut is used on Hobie® 14, 16 and 18 dolphin striker rods, as well as Hobie® 17 inboard support. Hobie Part# 8050511
    NUT NYLOCK 3/8-24"
    Hobie
    Nut 10-32 Nylock Low Profile Murrays Part# 50-8050211 Hobie factory low-profile Nylock 10-32 nut as used on EZ-Loc rudder assembly. Hobie Part# 8050211
    NUT 10-32 NYLOCK LOW PROFILE
    Hobie
    Recently viewed